configs/orangepi_pc_defconfig

@@ -27,6 +27,8 @@ export UCLIBC_CONFIG_FILE=${root}/board/${BOARD_NAME}/uclibc-1.0.50.config
 export KERNEL_VERSION=6.13.3
 export KERNEL_CONFIG_FILE=${root}/board/${BOARD_NAME}/linux-${KERNEL_VERSION}.config
 
+export UBOOT_DEFCONFIG=orangepi_pc_defconfig
+
 export ZLIB_ENABLE=y
 export DROPBEAR_ENABLE=y
 export IMAGE_USABLE_ENABLE=y

configs/orangepi_zero_2w_defconfig

@@ -27,6 +27,8 @@ export UCLIBC_CONFIG_FILE=$root/board/${BOARD_NAME}/uclibc-1.0.50.config
 export KERNEL_VERSION=6.8.6
 export KERNEL_CONFIG_FILE=${root}/board/${BOARD_NAME}/linux-${KERNEL_VERSION}.config
 
+export UBOOT_DEFCONFIG=orangepi_zero2w_defconfig
+
 export ZLIB_ENABLE=y
 export DROPBEAR_ENABLE=y
 export IMAGE_USABLE_ENABLE=y
@@ -43,5 +45,5 @@ export HOSTAPD_ENABLE=y
 export OPENSSL_ENABLE=y
 export DNSMASQ_ENABLE=y
 export IPTABLES_ENABLE=y
-export KO8821AU_ENABLE=y
+export KO8821AU_ENABLE=n
 #--------------------------------------

scripts/config.sh

@@ -27,6 +27,8 @@ export UCLIBC_CONFIG_FILE=$root/board/${BOARD_NAME}/uclibc-1.0.50.config
 export KERNEL_VERSION=6.8.6
 export KERNEL_CONFIG_FILE=${root}/board/${BOARD_NAME}/linux-${KERNEL_VERSION}.config
 
+export UBOOT_DEFCONFIG=orangepi_zero2w_defconfig
+
 export ZLIB_ENABLE=y
 export DROPBEAR_ENABLE=y
 export IMAGE_USABLE_ENABLE=y
@@ -43,5 +45,5 @@ export HOSTAPD_ENABLE=y
 export OPENSSL_ENABLE=y
 export DNSMASQ_ENABLE=y
 export IPTABLES_ENABLE=y
-export KO8821AU_ENABLE=y
+export KO8821AU_ENABLE=n
 #--------------------------------------

scripts/kernel.sh

@@ -22,7 +22,9 @@ kernel() {
     printf "$UGREEN** Building Linux Kernel\n$RESET"
     make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- $makeflags  # &>> $fulllogfile
     check $? "Build Linux Kernel"
-    ls -lh arch/$ARCH/boot/zImage
+    KIMAGE=zImage
+    [ "$ARCH" = "arm64" ] && KIMAGE=Image
+    ls -lh arch/$ARCH/boot/$KIMAGE
 } # kernel
 #-----------------------------------------------------------
 
@@ -54,7 +56,9 @@ kernel_with_rootfs() {
     printf "$UGREEN** Installing Linux Kernel into images path\n$RESET"
     # make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE INSTALL_MOD_PATH=$rootfspath modules_install # &>> $fulllogfile
     # rm -v $rootfspath/usr/lib/modules/6.1.91/{source,build}
-    cp -v arch/$ARCH/boot/zImage $sdroot/boot
+    KIMAGE=zImage
+    [ "$ARCH" = "arm64" ] && KIMAGE=Image
+    cp -v arch/$ARCH/boot/$KIMAGE $sdroot/boot
     check $? "Install Linux Kernel into images path"
 }
 #-----------------------------------------------------------

scripts/sdroot.sh

@@ -20,6 +20,7 @@ sdroot() {
     printf "$GREEN** Copy extlinux.conf\n$RESET"
     cp -v $root/extlinux/extlinux.conf $sdroot/boot/extlinux
     check $? "Copy extlinux.conf"
+    [ "$ARCH" = "arm64" ] && sed -i "s/zImage/Image/g" $sdroot/boot/extlinux/extlinux.conf
     kernel_with_rootfs
     uboot
     printf "$GREEN** Creating rootfs.ext4\n$RESET"
@@ -74,7 +75,9 @@ sdroot_usable() {
 
     initramfs
     cp -v $build/initramfs.img $sdroot/boot
-    cp -v $build/kernel/linux-6.13.3/arch/$ARCH/boot/zImage $sdroot/boot
+    KIMAGE=zImage
+    [ "$ARCH" = "arm64" ] && KIMAGE=Image
+    cp -v $build/kernel/linux-6.13.3/arch/$ARCH/boot/$KIMAGE $sdroot/boot
     uboot
     printf "$GREEN** Creating rootfs.ext4\n$RESET"
     cd $out
@@ -96,6 +99,7 @@ sdroot_usable() {
     check $? "Copy genimage.cfg"
     sed -i "s/FILEUUID/$uuid/g" genimage.cfg
     sed -i "s/ROOTUUID/$uuid/g" $sdroot/boot/extlinux/extlinux.conf
+    [ "$ARCH" = "arm64" ] && sed -i "s/zImage/Image/g" $sdroot/boot/extlinux/extlinux.conf
     sed -i "s/sdcard.img/sdcard_usable.img/g" genimage.cfg
     mkdir -v rootmnt
     sudo mount -v rootfs.ext4 rootmnt

scripts/uboot.sh

@@ -15,12 +15,20 @@ uboot() {
     check $? "Extract uboot"
     cd u-boot-$uboot_version
     # cp -rv $root/uclibc/config-1.0.50 .config
-    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- orangepi_pc_defconfig
+    make ARCH=arm CROSS_COMPILE=$CROSS_COMPILE- $UBOOT_DEFCONFIG
     check $? "Configure uboot"
-    make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE- $makeflags # &>> $fulllogfile
+    if [ "$BOARD_NAME" = "orangepi_pc" ]; then
+        make ARCH=arm CROSS_COMPILE=$CROSS_COMPILE- $makeflags # &>> $fulllogfile
+    elif [ "$BOARD_NAME" = "orangepi_zero_2w" ]; then
+        make ARCH=arm CROSS_COMPILE=$CROSS_COMPILE- BL31=$root/board/$BOARD_NAME/bl31.bin $makeflags
+    fi
     check $? "Build uboot"
     cp -v u-boot-sunxi-with-spl.bin $out
-    cp -v arch/arm/dts/sun8i-h3-orangepi-pc.dtb $sdroot/boot/dtbs
+    if [ "$ARCH" = "arm" ]; then
+        cp -v arch/arm/dts/sun8i-h3-orangepi-pc.dtb $sdroot/boot/dtbs
+    elif [ "$ARCH" = "arm64" ]; then
+        cp -v dts/upstream/src/arm64/allwinner/sun50i-h618-orangepi-zero2w.dtb $sdroot/boot/dtbs
+    fi
     # make ARCH=$ARCH CROSS_COMPILE=$CROSS_COMPILE DESTDIR=$rootfspath install # &>> $fulllogfile
     check $? "Install uboot to out directory"
     check $? "Build and install uboot to out directory"