This change also removes a previous bug
where --dhcp-alternate-port would affect the port used
to relay _to_ as well as the port being listened on.
The new feature allows configuration to provide bug-for-bug
compatibility, if required. Thanks to Damian Kaczkowski
for the feature suggestion.
On machines with many interfaces, enumerating them
via netlink on each packet reciept is slow,
and unneccesary. All we need is the local address->interface
mapping, which can be cached in the relay structures.
Error with prefixed address assignment. When it is calculating number of
addresses from prefixlen, it rotates only 32bit int instead of 64b uint.
Only result is assigned to 64b variable.
Two examples:
dhcp-host=[2000::1230:0:0/92],correct-prefix
dhcp-host=[2000::1234:5678:0/92],incorrect-prefix
If prefix length is lower than 96, the result is zero. It means
incorrect-prefix is not refused as it should. Fix is simple, attaching
patch with it. Just rotate 64b int.
There was discussion in the past regarding DHCPv6 NTP server option
which needs special subclassing per RFC5908.
Patch adds support for unicast, multicast IPv6 address and for FQDN string,
preserving possibly used (as suggested earlier) hex value.
Unfortunately it's still not fully free from limitations - only address list or
only fqdn value list is possible, not mixed due current
state option parsing & flagging.
rfc3315.c:1711:28: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
if (!(addr_list->flags && ADDRLIST_DECLINED) ||
^ ~~~~~~~~~~~~~~~~~
It's a flag bit so should be bitwise '&' operator
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
When dhcp-host options can have many IPv6 addresses, we need
to deal with one of them being declined by a client. The other
addresses are still valid.
It seems that this logic never worked, even with only one address, since
the DECLINED flag was never tested.
When a request matching the clid or mac address is
recieved the server will iterate over all candidate
addresses until it find's one that is not already
leased to a different clid/iaid and advertise
this address.
Using multiple reservations for a single host makes it
possible to maintain a static leases only configuration
which support network booting systems with UEFI firmware
that request a new address (a new SOLICIT with a new IA_NA
option using a new IAID) for different boot modes, for
instance 'PXE over IPv6', and 'HTTP-Boot over IPv6'. Open
Virtual Machine Firmware (OVMF) and most UEFI firmware
build on the EDK2 code base exhibit this behaviour.
Fix information leak in DHCPv6. A crafted DHCPv6 packet can
cause dnsmasq to forward memory from outside the packet
buffer to a DHCPv6 server when acting as a relay.
Fix heap overflow in DNS code. This is a potentially serious
security hole. It allows an attacker who can make DNS
requests to dnsmasq, and who controls the contents of
a domain, which is thereby queried, to overflow
(by 2 bytes) a heap buffer and either crash, or
even take control of, dnsmasq.
Simon Kelley