diff --git a/test/add-remove-dynamic-service-sub-config.sh b/test/add-remove-dynamic-service-sub-config.sh
index e35ceb39..a0e3a709 100755
--- a/test/add-remove-dynamic-service-sub-config.sh
+++ b/test/add-remove-dynamic-service-sub-config.sh
@@ -6,10 +6,10 @@ TEST_DIR=$(dirname "$0")
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_RCSD/service.conf"
+    say "Running test teardown."
+    run "rm -f $FINIT_RCSD/service.conf"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/add-remove-dynamic-service.sh b/test/add-remove-dynamic-service.sh
index 29c49296..df6cb029 100755
--- a/test/add-remove-dynamic-service.sh
+++ b/test/add-remove-dynamic-service.sh
@@ -6,10 +6,10 @@ TEST_DIR=$(dirname "$0")
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/cond-start-task.sh b/test/cond-start-task.sh
index 0aa6e68f..2678d3a3 100755
--- a/test/cond-start-task.sh
+++ b/test/cond-start-task.sh
@@ -9,77 +9,77 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
-	say "Running test teardown."
-	run "rm -f $TEST_CONF"
+    say "Test done $(date)"
+    say "Running test teardown."
+    run "rm -f $TEST_CONF"
 }
 
 test_one()
 {
-	cond=$1
-	stanza=$2
+    cond=$1
+    stanza=$2
 
-	sleep 5
-	say 'Enable finit debug, try to figure out what is going on ...'
-	run "initctl debug"
+    sleep 5
+    say 'Enable finit debug, try to figure out what is going on ...'
+    run "initctl debug"
 
-	say "Add stanza '$stanza' to $TEST_CONF ..."
-	run "echo '$stanza' > $TEST_CONF"
+    say "Add stanza '$stanza' to $TEST_CONF ..."
+    run "echo '$stanza' > $TEST_CONF"
 
-	run "ls -l /run/ /run/finit/"
-	say 'Reload Finit'
-	run "initctl ls"
-	run "initctl reload"
-	run "initctl status"
-	run "ps"
+    run "ls -l /run/ /run/finit/"
+    say 'Reload Finit'
+    run "initctl ls"
+    run "initctl reload"
+    run "initctl status"
+    run "ps"
 
-	date
-	sleep 2
-	date
-	run "ls -l /run/ /run/finit/"
-	say 'Asserting condition'
-	run "initctl cond set $cond"
+    date
+    sleep 2
+    date
+    run "ls -l /run/ /run/finit/"
+    say 'Asserting condition'
+    run "initctl cond set $cond"
 
-	date
-	sleep 2
-	date
-	run "ls -l /run/ /run/finit/"
-	run "initctl status"
-	run "ps"
-	run "initctl status task.sh"
+    date
+    sleep 2
+    date
+    run "ls -l /run/ /run/finit/"
+    run "initctl status"
+    run "ps"
+    run "initctl status task.sh"
 
-	sleep 1
-	run "echo Hej; cat /run/task.state"
+    sleep 1
+    run "echo Hej; cat /run/task.state"
 
-	assert_file_contains /run/task.state 1
+    assert_file_contains /run/task.state 1
 
-	say 'Reload Finit'
-	run "initctl reload"
-	sleep 1
-	say 'Ensure task has not run again ...'
-	assert_file_contains /run/task.state 1
+    say 'Reload Finit'
+    run "initctl reload"
+    sleep 1
+    say 'Ensure task has not run again ...'
+    assert_file_contains /run/task.state 1
 
-	say 'Switch to another runlevel ...'
-	run "initctl runlevel 3"
-	sleep 1
-	say 'Ensure task has run again ...'
-	assert_file_contains /run/task.state 2
-	
-	say 'Touch task.sh .conf file and reload Finit ...'
-	run "touch $TEST_CONF"
-	run "initctl reload"
-	sleep 1
-#	run "initctl status task.sh"
-	assert_file_contains /run/task.state 3
+    say 'Switch to another runlevel ...'
+    run "initctl runlevel 3"
+    sleep 1
+    say 'Ensure task has run again ...'
+    assert_file_contains /run/task.state 2
+    
+    say 'Touch task.sh .conf file and reload Finit ...'
+    run "touch $TEST_CONF"
+    run "initctl reload"
+    sleep 1
+    #	run "initctl status task.sh"
+    assert_file_contains /run/task.state 3
 
-	say "Done, drop stanza from $TEST_CONF ..."
-	run "rm $TEST_CONF"
-	run "initctl reload"
+    say "Done, drop stanza from $TEST_CONF ..."
+    run "rm $TEST_CONF"
+    run "initctl reload"
 }
 
 
diff --git a/test/crashing.sh b/test/crashing.sh
index c54fc813..7f154583 100755
--- a/test/crashing.sh
+++ b/test/crashing.sh
@@ -7,57 +7,57 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF" "/tmp/post"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF" "/tmp/post"
 }
 
 crashit()
 {
-	nm=$1
+    nm=$1
 
-	say 'Simulate service crash (kill -9 ..)'
-	i=0
-	laps=100
-	while [ $i -lt $laps ]; do
-		i=$((i + 1))
-		say "Lap $i/$laps, killing service $nm ..." # we have this, no sleep needed
-		if ! run "slay $nm"; then
-			break;
-		fi
-	done
+    say 'Simulate service crash (kill -9 ..)'
+    i=0
+    laps=100
+    while [ $i -lt $laps ]; do
+	i=$((i + 1))
+	say "Lap $i/$laps, killing service $nm ..." # we have this, no sleep needed
+	if ! run "slay $nm"; then
+	    break;
+	fi
+    done
 }
 
 test_one()
 {
-	type=$1
-	shift
-	nm=$1
-	shift
-	args=$*
+    type=$1
+    shift
+    nm=$1
+    shift
+    args=$*
 
-	say "Add service stanza in $FINIT_CONF"
-	run "echo service log:stderr oncrash:script post:/bin/post.sh $nm $args > $FINIT_CONF"
+    say "Add service stanza in $FINIT_CONF"
+    run "echo service log:stderr oncrash:script post:/bin/post.sh $nm $args > $FINIT_CONF"
 
-	say 'Reload Finit'
-	run "initctl reload"
+    say 'Reload Finit'
+    run "initctl reload"
 
-	if [ "$type" = "sig" ]; then
-		retry "assert_num_children 1 $nm"
-		run "initctl status $nm"
-		crashit "$nm"
-	fi
+    if [ "$type" = "sig" ]; then
+	retry "assert_num_children 1 $nm"
+	run "initctl status $nm"
+	crashit "$nm"
+    fi
 
-	retry "assert_status $nm crashed" 500
-	run "cat /tmp/post"
-	assert_file_contains "/tmp/post" "POST"
-	run "rm -f /tmp/post"
+    retry "assert_status $nm crashed" 500
+    run "cat /tmp/post"
+    assert_file_contains "/tmp/post" "POST"
+    run "rm -f /tmp/post"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/depserv.sh b/test/depserv.sh
index b227e317..7c3ee728 100755
--- a/test/depserv.sh
+++ b/test/depserv.sh
@@ -16,15 +16,15 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
-	say "Running test teardown."
+    say "Test done $(date)"
+    say "Running test teardown."
 
-	run "rm -f $FINIT_CONF" "/tmp/post"
+    run "rm -f $FINIT_CONF" "/tmp/post"
 }
 
 # shellcheck source=/dev/null
@@ -35,36 +35,36 @@ test_teardown()
 
 test_one()
 {
-	cond=$1
-	say "Verifying foo -> <$cond> bar ..."
-	run "echo service log:stderr name:foo            serv -np -i foo -f /tmp/arrakis  > $FINIT_CONF"
-	run "echo service log:stderr name:bar \<!$cond\> serv -np -i bar -F /tmp/arrakis >> $FINIT_CONF"
-	run "cat $FINIT_CONF"
+    cond=$1
+    say "Verifying foo -> <$cond> bar ..."
+    run "echo service log:stderr name:foo            serv -np -i foo -f /tmp/arrakis  > $FINIT_CONF"
+    run "echo service log:stderr name:bar \<!$cond\> serv -np -i bar -F /tmp/arrakis >> $FINIT_CONF"
+    run "cat $FINIT_CONF"
 
-	say 'Reload Finit'
-	run "initctl reload"
+    say 'Reload Finit'
+    run "initctl reload"
 
-	run "initctl status"
-	assert_status "foo" "running"
-	assert_cond   "$cond"
-	assert_status "bar" "running"
+    run "initctl status"
+    assert_status "foo" "running"
+    assert_cond   "$cond"
+    assert_status "bar" "running"
 
-	say "Verify bar is restarted when foo is ..."
-	pid=$(texec initctl |grep bar | awk '{print $1;}')
-	run "initctl restart foo"
-	run "initctl status"
-	assert "bar is restarted" "$(texec initctl |grep bar | awk '{print $1;}')" != "$pid"
+    say "Verify bar is restarted when foo is ..."
+    pid=$(texec initctl |grep bar | awk '{print $1;}')
+    run "initctl restart foo"
+    run "initctl status"
+    assert "bar is restarted" "$(texec initctl |grep bar | awk '{print $1;}')" != "$pid"
 
-	# Wait for spice to be stolen by the Harkonnen
-	sleep 3
-	# bar should now have detected the loss of spice and be in restart
-	run "initctl status"
-	assert_status "bar" "restart"
-	# verify bar is stopped->waiting and no longer in restart after stopping foo
-	run "initctl stop foo"
-	run "initctl status"
-	run "initctl status bar"
-	assert_status "bar" "waiting"
+    # Wait for spice to be stolen by the Harkonnen
+    sleep 3
+    # bar should now have detected the loss of spice and be in restart
+    run "initctl status"
+    assert_status "bar" "restart"
+    # verify bar is stopped->waiting and no longer in restart after stopping foo
+    run "initctl stop foo"
+    run "initctl status"
+    run "initctl status bar"
+    assert_status "bar" "waiting"
 }
 
 sep
diff --git a/test/devmon.sh b/test/devmon.sh
index 08aa9586..edd6e142 100755
--- a/test/devmon.sh
+++ b/test/devmon.sh
@@ -9,52 +9,52 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
-	say "Running test teardown."
+    say "Test done $(date)"
+    say "Running test teardown."
 
-	run "rm -f $FINIT_CONF /tmp/post"
+    run "rm -f $FINIT_CONF /tmp/post"
 }
 
 # Cannot run mknod as non-root even in a chroot
 # touch is close enough for our needs
 mkdev()
 {
-	dir=$(dirname "$1")
-	run "mkdir -p $dir"
-	run "touch $1"
+    dir=$(dirname "$1")
+    run "mkdir -p $dir"
+    run "touch $1"
 }
 
 rmdev()
 {
-	run "rm $1"
+    run "rm $1"
 }
 
 test_one()
 {
-	cond="$1"
-	node="/$cond"
+    cond="$1"
+    node="/$cond"
 
-	say "Checking cond $cond and device $node ..."
-	run "echo service log:null \<$cond\> serv -np >> $FINIT_CONF"
-	run "cat $FINIT_CONF"
-	run "initctl reload"
+    say "Checking cond $cond and device $node ..."
+    run "echo service log:null \<$cond\> serv -np >> $FINIT_CONF"
+    run "cat $FINIT_CONF"
+    run "initctl reload"
 
-	assert_status "serv" "waiting"
+    assert_status "serv" "waiting"
 
-	mkdev "$node"
-	assert_status "serv" "running"
+    mkdev "$node"
+    assert_status "serv" "running"
 
-	rmdev "$node"
-	assert_status "serv" "waiting"
+    rmdev "$node"
+    assert_status "serv" "waiting"
 
-	say "Cleaning up ..."
-	run "rm $FINIT_CONF"
-	run "initctl reload"
+    say "Cleaning up ..."
+    run "rm $FINIT_CONF"
+    run "initctl reload"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/failing-sysv.sh b/test/failing-sysv.sh
index 4ca8e2dd..377cf03a 100755
--- a/test/failing-sysv.sh
+++ b/test/failing-sysv.sh
@@ -8,16 +8,16 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
-	run "mkdir -p /etc/default"
+    say "Test start $(date)"
+    run "mkdir -p /etc/default"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/global-envs.sh b/test/global-envs.sh
index aac3f209..0528ca14 100755
--- a/test/global-envs.sh
+++ b/test/global-envs.sh
@@ -5,15 +5,15 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/initctl-status-subset.sh b/test/initctl-status-subset.sh
index cd8a0c36..863acb05 100755
--- a/test/initctl-status-subset.sh
+++ b/test/initctl-status-subset.sh
@@ -9,28 +9,28 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 test_init()
 {
-	run "echo '# Three foo and one bar enter Finit' > $FINIT_CONF"
+    run "echo '# Three foo and one bar enter Finit' > $FINIT_CONF"
 }
 
 test_add_one()
 {
-	service=$1
+    service=$1
 
-	say "Add service stanza '$service' to $FINIT_CONF ..."
-	run "echo '$service' >> $FINIT_CONF"
+    say "Add service stanza '$service' to $FINIT_CONF ..."
+    run "echo '$service' >> $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/lib/enter.sh b/test/lib/enter.sh
index 1f198021..a5750448 100755
--- a/test/lib/enter.sh
+++ b/test/lib/enter.sh
@@ -4,10 +4,10 @@ set -eu
 
 cmd=""
 if [ "$#" -lt 1 ]; then
-	cmd="/bin/sh"
+    cmd="/bin/sh"
 else
-	cmd=$1
-	shift
+    cmd=$1
+    shift
 fi
 
 TEST_DIR=$(dirname "$0")/..
@@ -15,11 +15,11 @@ SYSROOT="${SYSROOT:-$(pwd)/${TEST_DIR}/sysroot}"
 PID_FILE="$SYSROOT/running_test.pid"
 
 if [ -f  "$PID_FILE" ] ; then
-	target=$(cat "$PID_FILE")
-	target=$(pgrep -P "$target")
+    target=$(cat "$PID_FILE")
+    target=$(pgrep -P "$target")
 else
-	echo "No test running!"
-	exit 1
+    echo "No test running!"
+    exit 1
 fi
 
 # shellcheck disable=SC1091
diff --git a/test/lib/exec.sh b/test/lib/exec.sh
index 15ddde70..6efadc91 100755
--- a/test/lib/exec.sh
+++ b/test/lib/exec.sh
@@ -24,9 +24,9 @@
 set -eu
 
 if [ "$#" -lt 2 ]; then
-	echo "Usage:"
-	echo "  $0 [target-pid] [command [arguments]]"
-	exit 1
+    echo "Usage:"
+    echo "  $0 [target-pid] [command [arguments]]"
+    exit 1
 fi
 target="$1"
 shift
@@ -46,12 +46,12 @@ PATH="$TESTENV_PATH"
 export PATH
 
 "$nsenter"					\
-	--preserve-credentials			\
-	--user					\
-	--mount					\
-	--uts					\
-	--ipc					\
-	--net					\
-	--pid					\
-	-w -t "$target"				\
-	"$chroot" "$SYSROOT" "$@"
+    --preserve-credentials			\
+    --user					\
+    --mount					\
+    --uts					\
+    --ipc					\
+    --net					\
+    --pid					\
+    -w -t "$target"				\
+    "$chroot" "$SYSROOT" "$@"
diff --git a/test/lib/setup.sh b/test/lib/setup.sh
index 61a3932b..f5a521ad 100755
--- a/test/lib/setup.sh
+++ b/test/lib/setup.sh
@@ -342,17 +342,17 @@ echo "Finit running as PID $finit_pid"
 i=0
 set +u
 while [ -z "$BOOTSTRAP" ] && [ $i -lt 10 ]; do
-	lvl=$(texec sh -c "initctl runlevel | awk '{print \$2;}'")
-	if [ "$lvl" = "$FINIT_RUNLEVEL" ]; then
-		say "Reached runlevel $FINIT_RUNLEVEL, releasing test."
-		break;
-	fi
-	i=$((i + 1))
-	sleep 1
+    lvl=$(texec sh -c "initctl runlevel | awk '{print \$2;}'")
+    if [ "$lvl" = "$FINIT_RUNLEVEL" ]; then
+	say "Reached runlevel $FINIT_RUNLEVEL, releasing test."
+	break;
+    fi
+    i=$((i + 1))
+    sleep 1
 done
 set -u
 
 if type test_setup > /dev/null 2>&1 ; then
-	test_setup
+    test_setup
 fi
 wdstart $TEST_TIMEOUT
diff --git a/test/notify.sh b/test/notify.sh
index c68e8327..41c86841 100755
--- a/test/notify.sh
+++ b/test/notify.sh
@@ -8,16 +8,16 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
-	run "mkdir -p /etc/default"
+    say "Test start $(date)"
+    run "mkdir -p /etc/default"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
-	say "Running test teardown."
+    say "Test done $(date)"
+    say "Running test teardown."
 
-	run "rm -f $FINIT_CONF"
+    run "rm -f $FINIT_CONF"
 }
 
 test_one()
@@ -37,11 +37,11 @@ test_one()
     run "initctl reload"
 
     sleep 1
-#    run "initctl status serv"
+    #    run "initctl status serv"
     assert_status "serv" "running"
 
     sleep 2
-#    run "initctl cond dump"
+    #    run "initctl cond dump"
     assert_cond "service/serv/ready"
 
     say "Verify 'ready' is set after SIGHUP ..."
@@ -52,7 +52,7 @@ test_one()
 
     # Issue #343
     say "Verify 'ready' is reasserted if service crashes and is restarted ..."
-#    run "initctl status serv"
+    #    run "initctl status serv"
     run "initctl signal serv 9"
     retry 'assert_status "serv" "running"' 2 1
     retry 'assert_cond "service/serv/ready"' 3 1
@@ -67,7 +67,7 @@ test_one()
     say "Verify 'ready' is reasserted on 'initctl reload' ..."
     run "initctl reload"
     sleep 1
-#    run "initctl; initctl cond dump"
+    #    run "initctl; initctl cond dump"
     assert_status "serv" "running"
     assert_cond "service/serv/ready"
 
@@ -75,12 +75,12 @@ test_one()
     # 'started' when they created their PID file.  The serv test daemon
     # waits 3 sec between pidfile and notify to trigger this bug.
     if [ "$type" != "native" ]; then
-	    say "Verify 'ready' is *not* asserted immediately on restart + reload"
-	    run "initctl restart serv"
-	    run "initctl reload"
-	    sleep 1
-	    assert_nocond "service/serv/ready"
-	    retry 'assert_cond "service/serv/ready"' 5 0.5
+	say "Verify 'ready' is *not* asserted immediately on restart + reload"
+	run "initctl restart serv"
+	run "initctl reload"
+	sleep 1
+	assert_nocond "service/serv/ready"
+	retry 'assert_cond "service/serv/ready"' 5 0.5
     fi
 
     say "Verify 'ready' is deasserted on stop ..."
@@ -93,9 +93,9 @@ test_one()
     run "rm -f $FINIT_CONF"
     run "initctl reload"
 
-    # sleep 2
-    # num=$(run "find /proc/1/fd |wc -l")
-    # say "finit: number of open file descriptors after test: $num"
+#    sleep 2
+#    num=$(run "find /proc/1/fd |wc -l")
+#    say "finit: number of open file descriptors after test: $num"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/pidfile.sh b/test/pidfile.sh
index 9706b6f8..737fc31f 100755
--- a/test/pidfile.sh
+++ b/test/pidfile.sh
@@ -7,32 +7,32 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
-	say "Running test teardown."
+    say "Test done $(date)"
+    say "Running test teardown."
 
-	run "rm -f $FINIT_CONF" "/tmp/post"
+    run "rm -f $FINIT_CONF" "/tmp/post"
 }
 
 test_one()
 {
-	pidfn=$1
-	service=$2
+    pidfn=$1
+    service=$2
 
-	sep
-	say "Add service stanza '$service' to $FINIT_CONF ..."
-	run "echo '$service' > $FINIT_CONF"
-	run "initctl reload"
+    sep
+    say "Add service stanza '$service' to $FINIT_CONF ..."
+    run "echo '$service' > $FINIT_CONF"
+    run "initctl reload"
 
-	assert_is_pidfile "serv" "$pidfn"
+    assert_is_pidfile "serv" "$pidfn"
 
-	say "Done, drop service from $FINIT_CONF ..."
-	run "rm $FINIT_CONF"
-	run "initctl reload"
+    say "Done, drop service from $FINIT_CONF ..."
+    run "rm $FINIT_CONF"
+    run "initctl reload"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/pre-post-serv.sh b/test/pre-post-serv.sh
index 9e3189fd..cc90864a 100755
--- a/test/pre-post-serv.sh
+++ b/test/pre-post-serv.sh
@@ -5,49 +5,49 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 test_one()
 {
-	pre=$1
-	precont=$2
-	service=$3
-	post=$4
-	postcont=$5
+    pre=$1
+    precont=$2
+    service=$3
+    post=$4
+    postcont=$5
 
-	say "Add service stanza '$service' to $FINIT_CONF ..."
-	run "echo '$service' > $FINIT_CONF"
+    say "Add service stanza '$service' to $FINIT_CONF ..."
+    run "echo '$service' > $FINIT_CONF"
 
-	say 'Reload Finit'
-	run "initctl reload"
+    say 'Reload Finit'
+    run "initctl reload"
 
-	retry 'assert_num_children 1 serv'
-	if [ -n "$pre" ]; then
-		assert_file_contains "$pre" "$precont"
-		run "rm -f $pre"
-	fi
+    retry 'assert_num_children 1 serv'
+    if [ -n "$pre" ]; then
+	assert_file_contains "$pre" "$precont"
+	run "rm -f $pre"
+    fi
 
-	say 'Stop the service'
-	run "initctl stop serv"
+    say 'Stop the service'
+    run "initctl stop serv"
 
-	retry 'assert_num_children 0 serv'
-	if [ -n "$post" ]; then
-		assert_file_contains "$post" "$postcont"
-		run "rm -f $post"
-	fi
+    retry 'assert_num_children 0 serv'
+    if [ -n "$post" ]; then
+	assert_file_contains "$post" "$postcont"
+	run "rm -f $post"
+    fi
 
-	say "Done, drop service from $FINIT_CONF ..."
-	run "rm $FINIT_CONF"
-	run "initctl reload"
+    say "Done, drop service from $FINIT_CONF ..."
+    run "rm $FINIT_CONF"
+    run "initctl reload"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/rclocal.sh b/test/rclocal.sh
index eecd386d..c60d0ce2 100755
--- a/test/rclocal.sh
+++ b/test/rclocal.sh
@@ -12,12 +12,12 @@ RCLOCAL="echo 'KILROY WAS HERE' > /tmp/rclocal"
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 }
 
 sleep 1
diff --git a/test/ready-serv.sh b/test/ready-serv.sh
index 7ea29aa8..aa624249 100755
--- a/test/ready-serv.sh
+++ b/test/ready-serv.sh
@@ -6,39 +6,39 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 test_one()
 {
-	service=$1
-	file=/tmp/ready
+    service=$1
+    file=/tmp/ready
 
-	say "Add service stanza '$service' to $FINIT_CONF ..."
-	run "echo '$service' > $FINIT_CONF"
+    say "Add service stanza '$service' to $FINIT_CONF ..."
+    run "echo '$service' > $FINIT_CONF"
 
-	say 'Reload Finit'
-	run "initctl reload"
+    say 'Reload Finit'
+    run "initctl reload"
 
-	retry 'assert_num_children 1 serv'
-	assert_file_contains "$file" "READY"
-	run "rm -f $file"
+    retry 'assert_num_children 1 serv'
+    assert_file_contains "$file" "READY"
+    run "rm -f $file"
 
-	say 'Stop the service'
-	run "initctl stop serv"
-	retry 'assert_num_children 0 serv'
+    say 'Stop the service'
+    run "initctl stop serv"
+    retry 'assert_num_children 0 serv'
 
-	say "Done, drop service from $FINIT_CONF ..."
-	run "rm $FINIT_CONF"
-	run "initctl reload"
+    say "Done, drop service from $FINIT_CONF ..."
+    run "rm $FINIT_CONF"
+    run "initctl reload"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/restart-self.sh b/test/restart-self.sh
index 751ddb9c..633d9a7f 100755
--- a/test/restart-self.sh
+++ b/test/restart-self.sh
@@ -6,21 +6,21 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
-	run "mkdir -p /etc/default"
+    say "Test start $(date)"
+    run "mkdir -p /etc/default"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 check_restarts()
 {
-	assert "serv restarts" "$(texec cat "$1" | awk '{print $1;}')" -ge "$2"
+    assert "serv restarts" "$(texec cat "$1" | awk '{print $1;}')" -ge "$2"
 }
 
 
diff --git a/test/run-restart-forever.sh b/test/run-restart-forever.sh
index a4cd04b3..5df28a10 100755
--- a/test/run-restart-forever.sh
+++ b/test/run-restart-forever.sh
@@ -9,17 +9,17 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
-	run "mkdir -p /etc/default"
-	export TEST_TIMEOUT=5
+    say "Test start $(date)"
+    run "mkdir -p /etc/default"
+    export TEST_TIMEOUT=5
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/runlevel.sh b/test/runlevel.sh
index d5fb101a..4b3e33c9 100755
--- a/test/runlevel.sh
+++ b/test/runlevel.sh
@@ -9,12 +9,12 @@ FINIT_RUNLEVEL=9
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 }
 
 # shellcheck source=/dev/null
@@ -23,7 +23,7 @@ test_teardown()
 say 'Check runlevel'
 lvl=$(run "initctl runlevel | awk '{print \$2;}'")
 if [ "$lvl" -eq "9" ]; then
-	return 0
+    return 0
 fi
 
 return 1
diff --git a/test/setup-sysroot.sh b/test/setup-sysroot.sh
index 77e598c7..1ead6341 100755
--- a/test/setup-sysroot.sh
+++ b/test/setup-sysroot.sh
@@ -13,11 +13,11 @@ FINITBIN="$(pwd)/$top_builddir/src/finit" DEST="$SYSROOT" make -f "$srcdir/lib/s
 
 # Drop plugins we don't need in test, only causes confusing FAIL in logs.
 for plugin in tty.so urandom.so rtc.so modprobe.so hotplug.so; do
-	find "$SYSROOT" -name $plugin -delete
+    find "$SYSROOT" -name $plugin -delete
 done
 
 # Drop system .conf files we don't need in test, same as above
 for conf in hotplug.conf; do
-	find "$SYSROOT" -name $conf -delete
+    find "$SYSROOT" -name $conf -delete
 done
 
diff --git a/test/signal-service.sh b/test/signal-service.sh
index ad402a46..8b9be367 100755
--- a/test/signal-service.sh
+++ b/test/signal-service.sh
@@ -7,10 +7,10 @@ TEST_DIR=$(dirname "$0")
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/start-kill-service.sh b/test/start-kill-service.sh
index 90b9a046..042e1c4d 100755
--- a/test/start-kill-service.sh
+++ b/test/start-kill-service.sh
@@ -8,10 +8,10 @@ TEST_DIR=$(dirname "$0")
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
@@ -35,9 +35,9 @@ say 'Simulate service crash (kill -9 ..)'
 i=0
 laps=1000
 while [ $i -lt $laps ]; do
-	i=$((i + 1))
-	say "Lap $i/$laps, killing service ..." # we have this, no sleep needed
-	run "slay service.sh"
+    i=$((i + 1))
+    say "Lap $i/$laps, killing service ..." # we have this, no sleep needed
+    run "slay service.sh"
 done
 
 retry 'assert_new_pid service.sh /run/service.pid'
diff --git a/test/start-stop-serv.sh b/test/start-stop-serv.sh
index a622dd16..de18387a 100755
--- a/test/start-stop-serv.sh
+++ b/test/start-stop-serv.sh
@@ -5,51 +5,51 @@ TEST_DIR=$(dirname "$0")
 
 test_setup()
 {
-	say "Test start $(date)"
+    say "Test start $(date)"
 }
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 test_one()
 {
-	pidfn=$1
-	service=$2
+    pidfn=$1
+    service=$2
 
-	say "Add service stanza '$service' to $FINIT_CONF ..."
-	run "echo '$service' > $FINIT_CONF"
+    say "Add service stanza '$service' to $FINIT_CONF ..."
+    run "echo '$service' > $FINIT_CONF"
 
-	say 'Reload Finit'
-	#run "initctl debug"
-	run "initctl reload"
-	#run "initctl status"
-	#run "ps"
+    say 'Reload Finit'
+    #run "initctl debug"
+    run "initctl reload"
+    #run "initctl status"
+    #run "ps"
 
-	#run "initctl status"
-	#run "ps"
-	#run "initctl status serv"
+    #run "initctl status"
+    #run "ps"
+    #run "initctl status serv"
 
-	retry 'assert_num_children 1 serv'
-	retry "assert_has_pidfile $pidfn" 1
+    retry 'assert_num_children 1 serv'
+    retry "assert_has_pidfile $pidfn" 1
 
-	say 'Stop the service'
-	run "initctl stop serv"
+    say 'Stop the service'
+    run "initctl stop serv"
 
-	retry 'assert_num_children 0 serv'
+    retry 'assert_num_children 0 serv'
 
-	say 'Start the service again'
-	run "initctl start serv"
+    say 'Start the service again'
+    run "initctl start serv"
 
-	retry 'assert_num_children 1 serv'
+    retry 'assert_num_children 1 serv'
 
-	say "Done, drop service from $FINIT_CONF ..."
-	run "rm $FINIT_CONF"
-	run "initctl reload"
+    say "Done, drop service from $FINIT_CONF ..."
+    run "rm $FINIT_CONF"
+    run "initctl reload"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/start-stop-service-sub-config.sh b/test/start-stop-service-sub-config.sh
index 0472afe7..65b8cc83 100755
--- a/test/start-stop-service-sub-config.sh
+++ b/test/start-stop-service-sub-config.sh
@@ -6,10 +6,10 @@ TEST_DIR=$(dirname "$0")
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_RCSD/service.conf"
+    say "Running test teardown."
+    run "rm -f $FINIT_RCSD/service.conf"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/start-stop-service.sh b/test/start-stop-service.sh
index 01a0f950..dcc4131f 100755
--- a/test/start-stop-service.sh
+++ b/test/start-stop-service.sh
@@ -6,10 +6,10 @@ TEST_DIR=$(dirname "$0")
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null
diff --git a/test/start-stop-sysv.sh b/test/start-stop-sysv.sh
index d80eb403..f20300ee 100755
--- a/test/start-stop-sysv.sh
+++ b/test/start-stop-sysv.sh
@@ -6,10 +6,10 @@ TEST_DIR=$(dirname "$0")
 
 test_teardown()
 {
-	say "Test done $(date)"
+    say "Test done $(date)"
 
-	say "Running test teardown."
-	run "rm -f $FINIT_CONF"
+    say "Running test teardown."
+    run "rm -f $FINIT_CONF"
 }
 
 # shellcheck source=/dev/null