This patch (untested) patch calls `service_reload_dynamic()` after both
run-parts (if directory exists) and after `/etc/rc.local` has run. The
intention is to reload any services modified/added/removed by a user
script so the system is properly up to date.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds a simple but effective watchdog daemon with support for
handover to an external daemon, should one register using the API.
Disabled by default, enable by:
configure --enable-watchdog
The watchdog forks to the background, opening /dev/watchdog setting a
three second timeout, and kicking every second. At shutdown/reboot the
daemon will receive SIGPWR from Finit to exit and cause a WDT reboot.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds initial support for registering a watchdog daemon with
Finit. Needed for situations when you want the system to actually be
rebooted by the watchdog timer (WDT) circuitry rather than the kernel.
The initctl API has been extended with a INIT_CMD_WDOG_HELLO command
that is used to both register and "ping" Finit periodically. As long as
Finit responds (with an ACK) the watchdog daemon knows Finit is alive.
At shutdown Finit stops all services (except kernel threads and daemons
marked with @ in the first character of their process name) and, if a
watchdog has registered, SIGPWR is sent to it when Finit has finished
unmounting etc., just prior to kernel reboot/halt/poweroff.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch moves both the definition and the call to bootclean() from
finit.c to the bootmisc plugin. We want to call bootclean() *after*
any /run and /var file systems have been mounted.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
- New requirements section about what Finit expects from the system
- Remove commented out `udevadm settle` code, now in README
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
On systems with systemd-udev/udevadm the trigger addition of devices at
boot wrecks havoc of /dev/console. This patch forces Finit to go silent
by default on such systems. Far from ideal, but since the actual root
cause for this messup is unknown this will have to do for now.
Also, add a settle timeout of 120 sec to the udev device tree population.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Without trigger, kernel modules won't be loaded automatically. Also
devices are not managed. For example, i915 was not loaded after boot
and my network card was not renamed from wlan0 to wlp3s0, which means
it was not handled properly by udev.
Signed-off-by: Wang He <xw897002528@gmail.com>
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds a very special debug mode to Finit. With this feature
enabled the actual duties of PID 1 is forked off early to a child. If
that child ever dies, usually due to a SIGSEGV, this wakes up the real
PID 1 which lauches a debug shell on the console.
Remember to disable 'quiet' and enable '--debug' on the kernel command
line to get all the debug logs -- which these days goes into the kernel
log in /dev/kmsg -- simply `cat /dev/kmsg` and use Ctrl-C to get the
shell prompt back.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Instead of ugly #ifdefs we now probe for mdev or udevd at runtime. Take
care to check for udev-finalize and location of udevd, it differs a lot
between distros.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch fixes the ordering of UTMP events. The first event that is
expected in /var/run/utmp is reboot, next is the runlevel change to
the configured runlevel, e.g. from S --> 2.
Let the bootmisc plugin handle this, it knows when /var/run/utmp has
been created and is writable. It is not the eact boot time, but close
enough for most usees.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for initializing /var/run/utmp with the initial
reboot as well as a shutdown record in the UTMP db.
Also, the run level change now properly records ~ and ~~ as line and id,
respectively, and the kernel release and time of each UTMP record is now
set properly.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The debug mode cannot be used in run_interactive() that early, so we
must disable it during the complete fsck run.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for the following /etc/fstab API's on systems
that do not have them, e.g. musl libc on Alpine Linux.
- setfsent()
- getfsent(), and
- endfsent()
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Run fsck much earlier, as soon as we can in fact.
The first 13 characters of the UUID, label or device name should
be sufficient to identify the device, without violating max width
of 78 chars.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for running fsck on all file systems listed in
/etc/fstab with a passno > 0. The fsck runs sequentially, starting with
the root fs (passno 1).
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Embedded Linux systems usually employ BusyBox mdev. This patch assumes
that all non-embedded systems employ udev. Adding support for cleaning
up the udev db after the initramfs, or mounting /dev if that not done.
It also runs the udev-finish script at the end.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Look for 'auto' *and* 'allow-hotplug' in /etc/network/interfaces when
bringing up Debian/BusyBox interfaces at boot.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds prototype support for the Debian/Ubuntu/Busybox network
configuration file /etc/netork/interfaces. If this file exists Finit
will call `ifup` for each (non-commented-out) interface marked `auto`.
With this implementation we block boot until all ifup commands have
returned, which is less than ideal. A better approach would be to ifup
only loopback and create deferred tasklets to be run in parallel with
the rest of the boot.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
If user has no start script fall back to set up at least loopback. This
fixes (at least) a problem on Alpine Linux where `ifup -a` returns error
if `lo` is already up.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Modern systems today use a RAM disk for /run and /run/lock, with
symlinks to the FHS locations in /var/run and /var/lock. See the
following link for details http://lwn.net/Articles/436012/
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Libraries and system headers should be included with <> instead of "".
This makes a great difference for the automatic dependency tracking.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch fixes regressions in --enable-static introduced with the
conversion to the GNU configure and build system.
The default link flag to libtool is set to -static-libtool-libs, meaning
not a fully static build -- the C library will still be used as an .so
which is usually what people want -- whereas libite (-lite) and libuEv
are linked statically.
$ ldd /sbin/finit /sbin/initctl
/sbin/finit:
linux-vdso.so.1 => (0x00007ffffde62000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f6979ad8000)
/lib64/ld-linux-x86-64.so.2 (0x000055d893e96000)
/sbin/initctl:
linux-vdso.so.1 => (0x00007ffed0dd6000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007feb3a29c000)
/lib64/ld-linux-x86-64.so.2 (0x00005556ebd2b000)
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The new state machine handling is not necessary to export to external
plugins, so this patch reduces the exposure of the global variable sm
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch replaces the verbose and kernel-quiet runtime options with
a (hopefully) more useful quiet and silent modes of operation.
By default Finit progressively shows all services it starts at boot, but
when boot has completed and services are started/restarted Finit prints
nothing. If `--disable-quiet` is given all started/restared/stoppping
messages are shown even after boot.
However, if `--enable-silent` is given Finit is completely silent even
at boot, no progress is shown, until the first service is started, which
on most systems is login.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Joachim Nilsson