As a last ditch effort to understand why an embedded system doesn't
boot, the operator should be able to see as much logs as possible
when enabling --debug mode on the kernel command line.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Also changes the default to set $HOME to / instead of nothing. This can
of course be improved immensely. Pull requests always welcome ;-)
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Add support for registering callbacks to be called after a given
timeout.
Use this to implement forceful termination of services that refuse to
terminate upon receiving a SIGTERM. If the service PID is not collected
within 3 seconds, send a SIGKILL to it.
Also, rework restarting of crashing services. When a service crashes for
the first time, try to restart it immediately. If it crashes again, wait
a few seconds before trying again. Just as before, if it continues to
crash, block the service.
This patch prevents double critical/error messages from being printed on
the console when there is no syslog daemon running yet.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Very early, before syslogd has started, we have traditionally been
forced to use stdout/stderr for debug, warning and error messages.
With this patch we can now rely on /dev/kmsg to preserve all logs
from early Finit problems. When syslogd/klogd starts up they read
/dev/kmsg and copy logs to /var/log/* files.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The new logit() function takes care to print to stderr if syslogd has
not yet started. The _d(), _e(), and _pe() macros have an additional
requirement: to always print on stderr.
After the boot we also want to see what happned during, so this patch
simply adds syslog() support to _d(), _e(), and _pe().
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch removes internal logging macros and adds support for logging
to stderr until a syslogd is up and running, i.e. /dev/log appears.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The fs.fs_type is only for *BSD, we hard-code it to "rw"
in the meantime. Should be safe in most cases.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for the following /etc/fstab API's on systems
that do not have them, e.g. musl libc on Alpine Linux.
- setfsent()
- getfsent(), and
- endfsent()
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds prototype support for the Debian/Ubuntu/Busybox network
configuration file /etc/netork/interfaces. If this file exists Finit
will call `ifup` for each (non-commented-out) interface marked `auto`.
With this implementation we block boot until all ifup commands have
returned, which is less than ideal. A better approach would be to ifup
only loopback and create deferred tasklets to be run in parallel with
the rest of the boot.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Libraries and system headers should be included with <> instead of "".
This makes a great difference for the automatic dependency tracking.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch corrects a long standing issue with Finit. System initial
bootstrap runlevel must be set to 'S' (0), not the configured fallback
runlevel 'RUNLEVEL', which likely is '2'.
Also, minor cleanup, reduce code duplication.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch replaces the verbose and kernel-quiet runtime options with
a (hopefully) more useful quiet and silent modes of operation.
By default Finit progressively shows all services it starts at boot, but
when boot has completed and services are started/restarted Finit prints
nothing. If `--disable-quiet` is given all started/restared/stoppping
messages are shown even after boot.
However, if `--enable-silent` is given Finit is completely silent even
at boot, no progress is shown, until the first service is started, which
on most systems is login.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The urandom.so plugin uncovered that `print_desc()` does not honor the
`verbose` flag. At runtime `print_desc()` et al should no be displaying
anyting when we finit operates in terse mode.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
- Upgrade libite (LITE) for new UNIX file parser API to improve static
builds of Finit.
- Re-enable bootmisc plugin for static builds by adding built-in support
for reading GID from /etc/group.
- Allow inetd support for static builds by adding built-in support for
reading service and protocol from /etc/services and /etc/protocols.
- Do not try to install/uninstall any plugins for static builds.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The tempfile() replacement in Finit leaked temporary files in /tmp.
The mkstemp() based implementation does not remove temporary files
when they are closed.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch makes it possible to communicate process name or JOB[:ID]
from initctl to Finit. When the process name translates into a service
with multiple instances Finit applies the requested command to all
instances. For example, two Dropbear SSH services running on two
different ports, calling `initctl stop dropbear` stops both services.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
- Reduce size of `helpers.c`, for linking against new `initctl` tool,
by moving out functions to `pid.c` and `exec.c`
- Add `AF_UNIX` API to Finit, to complement old `/dev/initctl` FIFO
- Let old FIFO API be used by init/telinit: `init <q | 1-9>`
- Move all advanced initctl code from `client.c` to `initctl.c`, yes
its a bit confusing to call the *new* tool the same as the old FIFO
but this is more in line with what, e.g Upstart does.
- Move all advanced server side code from `plugins/initctl.c` to `api.c`
- Update TODO with upcoming inetd syntax change and dynamic events.
- Temporarily fix display of inetd services from `initctl status -v`
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Further refactoring of the client code. Supported commands:
- debug: Toggle PID 1 debug flag
- version: Show Finit version or custom header string
- reload: Reload config files in /etc/finit.d/, same as SIGHUP
Also supported is the legacy 'init q' command, to reload config.
The 'status' command now supports an optiona '-v', either as an
argument to init itself, or as argument to the command. When it
is given 'status' lists verbose information about all services.
Currently only the service arguments are listed.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for starting and supervising multiple
services (run, task, or service) using an extra #ID number.
service #1 [2345] /sbin/httpd -f -h /http -p 80 -- Web server
service #2 [2345] /sbin/httpd -f -h /http -p 8080 -- Old web server
Also included in this patch is a fix for endless respawn of faulty
services. For instance, a buggy daemon that crashes repeatedly will now
be stopped after 10 respawns.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for a configure script and with it
support for disabling inetd support. See the output from
./configure --help
* Add configure script
* Sprinkle #ifdef fairy dust on svc.c when inetd support is disabled
* Use GCC built-in autodep calculator (-MMD -MP)
* Fix name space issue with include files, use relative paths
* Disable username/group name to uid/gid functions in static builds
* Bug out (error) if a user tries to build the bootmisc plugin static
Possibly fixes GitHub issue #5 and issue #6.
NOTE: The static build has not received any testing at all!
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This reverts commit 074686b520. Which
turned out to not work so well after all. For instance, launching TTYs
in a background process completely blocked inetd services from even
starting up listening sockets ... proper fork seems to work fine though.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Joachim Nilsson