In commit f0f358a13:
[ service.c: set/clear condition 'done' for run tasks ]
a runtask done condition would be set/cleared when entering DONE/HALTED
states, but it did not cover all the user cases, for instance, sometimes
an end user may want to know if a runtask has finished sucessfully or
to decide what to do on its failures.
So we now change the conditions to: tsktype/tskname/success and
tsktype/tskname/failure.
And this change not only applies to run/task types, but also applies to
sysv type, in case it fails, a sysv/tskname/failure condition would be
set.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Refactor new kill/shutdown implementation from 3e0063e to fix the
regression in compiler output:
sig.c: In function ‘kill_callback’:
sig.c:222:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
222 | kill(pid, (int)context);
| ^
Also, some minor renames and simplificactions to match project style.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Check all pointers
- Declaratons always at top of func/scope
- Use established variable nomenclature
- Skip useless if() stmt
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Comments preferably at beginning of func/sect
- Reorder code slightly, add whitespace for readability
- Drop useless comment
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The implementation looks up the named service by using
`svc_parse_jobstr`. The callbacks for `svc_parse_jobstr` has been
augmented to accept a user data parameter. For this use case,
a carrier for the actual signal was needed. The address of the
signal parameter is taken and passed on as a `void *`. The
callback then simply deferences it as an int - the signal number.
Blocking SIGTERM means Finit will wait another two seconds before it
sends SIGKILL, which casues a delayed [WARN] Killing ... before we can
proceed to shutdown/reboot -- not OK. Don't know what I was smoking
back in 2017, but it must've been good.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When running in a container we might not have the necessary privileges
to mount cgroups. Don't cause error in this case, just log it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A regression was introduced by commit f0f358a1:
[ service.c: set/clear condition 'done' for run tasks ]
svc->type is a integer but mistakenly being used as string, which will
cause crash.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Instead of unconditionally waiting 2 seconds for processes to die,
check continuously for remaining processes, and break the loop when
none remain.
Turn PID 1 to a RT process with highest priority 99 during shutdown,
this ensures it would not be preempted by other RT processes.
Signed-off-by: Robert Andersson <robert.m.andersson@atlascopco.com>
Signed-off-by: Mathias Thore <mathias.thore@atlascopco.com>
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
We like to know when a runtask (run/task/sysv)is done, so as to start
the services that depending on it, set a oneshot condition 'done' for
that case and clear it when runtask services enter HALTED state.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
It should not use relaxed comparison in some places, otherwise it mess
up with scenarios like:
```
$ initctl status ntpdpre
$ initctl status ntpd
```
the output might be same for both of the above commands without this
fix.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
This patch adds the -v,--version option to initctl, which acts as an
alias to the 'version' command. For now they end up in the same old
function, printing the program version. However, in time this will be
changed so that the 'version' command asks a running Finit for its
version instead of assuming the daemon is of the same version.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A 'module foo args ...' line in finit.conf can be looooooong. This
patch drops the module args from the progress output for brevity.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Previous patches only checked if cgroups v2 support was available in
the kernel. If mounting failed cgroups support was disabled.
However, much of the core logic to cgroups in Finit revolve around the
CPU controller. This patch adds checks to ensure that the kernel has
basic controller support as well.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Traditionally we've reset the service restart counter on two occasions:
1) when a service reaches its max crash count (default 10), and
2) when a service somehow "stabilizes"
In the second case the service is restored to normal running state and
we "forget" its bad previous behavior. Meaning we cannot catch daemons
that act in an unstable manner outside the "rage quit" scenario.
This patch allows for slowing aging (decrementing) the restart counter
once every five minutes. Meaning we still catch rage quitters but now
are also able catch other types of misbehavior.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds a recent feature request to keep track of the total
number of restarts (including crashes and initctl restart) of both
service and sysv daemons.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Clearing of the svc->pidfile was introduced in e1b87d70 for a
restriction that has now been removed.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds support for detecting if the Linux kernel Fint runs on
has support for cgroups v2. The probe is done very early, in runlevel
S, when attempting to mount /sys/fs/cgroup. Meaning, the log message
may be lost on systems that do not run sysklogd[1].
Here's the relevant logs from a system running myLinux on a kernel
that has cgroups v2 support disabled:
Jan 10 20:19:40 anarchy finit[1]: myLinux 2021.11-696-g8fddaf36ed, entering runlevel S
Jan 10 20:19:40 anarchy finit[1]: Kernel does not support cgroups v2, disabling.
Jan 10 20:19:41 anarchy finit[1]: myLinux 2021.11-696-g8fddaf36ed, entering runlevel 2
All code paths that attempt to set or query kernel cgroups config has
been short circuited when this happens. However, this does not apply
to any cgroup related config in the Finit .conf files -- which may of
course be omitted. Yet, if configuration directives exist, they will
be parsed and may cause error.
Also, the initctl tool checks if /sys/fs/cgroup is mounted at runtime
and disables all status output and commands that rely on the feature.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
initctl cannot link with helpers.c, so let's relocate these helper
functions to util.c instead. Need them to probe for cgroup support.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A timeout is not the same as a restart delay, which this option really
controls, but the name restart_delay is a bit too long. Hence, this
obvious name so there's no ambiguity what unit we're dealing with.
Keeping restarttmo:SEC as a compatibility setting for the benefit of
the original authors, for now.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Minor coding style cleanup. Also, clang complained of a signed vs
unsigned comparison in service_retry(), max(timeout, svc->restart_tmo)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As suggested in issue #197, this new command: 'initctl id [NAME]'
lists identities of all, or named, services. E.g,
# initctl id telnetd
telnetd:23
telnetd:2323
The NAME argument is optional, when omitted it lists all enabled
run/task/sysv/service in the system, with their full name, and any
optional identitty. E.g.
# initctl id
dropbear
tty:console
mdnsd
mini-snmpd
smcrouted
sntpd
ssdpd
sysklogd
watchdogd
httpd
telnetd:23
telnetd:2323
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When the system has multiple services 'foo' the initctl command
'status foo' should give a focused overview of all matching foo:*,
whereas a 'status foo:2' should show the detailed view of that
particular instance.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since Finit v4.0 kernel console output has been silenced just prior to
the banner being printed, unless finit.debug mode was enabled. This
patch makes sure to check the kernel loglevel, if it's >= 7, finit no
longer disables kernel console ouput.
Consequently, you now need 'quiet' on your kernel command line, or a
loglevel < 7 for a quiet boot, at least until a syslogd takes over.
This means that you now can debug the kernel and finit independently,
which should be a great comfort to anyone doing bringup or any form of
kernel debugging.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Ming Liu