All this code did was trigger prctl() to set process name to "console",
which you could use as a simple means of figuring out if a process was
started from the system console.
There are other ways to do this, which Finit should not be involved in.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch adds support for a new TTY device keyword `@console` which
auto-detects the system console by reading the SysFS file:
/sys/class/tty/console/active
Embedded systems with one of /dev/ttyAMA0, /tty/ttyMXC0 or the original
/dev/ttyS0, as their active serial console can now instead use a single
line to /etc/finit.d/getty.conf to start the built-in getty on the same
TTY as the kernel already runs on:
tty [12345789] @console 115200 noclear
With no TTY defined Finit will either do nothing (default), or start a
fallback shell if enabled in the configure script.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch removes the following very annoying warning for TTY devices
not yet available, i.e. plugged-in to the system.
Loading configuration ............................................................................. [ OK ]
[ 11.097414] finit[1]:tty_register():Incomplete or non-existing TTY device given, cannot register.
[ 11.101457] finit[1]:tty_register():Incomplete or non-existing TTY device given, cannot register.
Mounting filesystems .............................................................................. [ OK ]
Finit will not start a getty (built-in or external) if the TTY does not
exist, but having the configuration enabled makes it possible to do a
simple `initctl reload` to activate a plugged in TTY.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch aligns the two tty configuration stanzas, thus clear and wait
are now the default for both.
tty [LVLS] <DEV> [BAUD] [noclear] [nowait] [TERM]
tty [LVLS] <CMD> <ARGS> [noclear] [nowait]
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This patch makes it possible to disable the "Please press Enter" prompt
when using an external getty. Simply append `nowait` to the .conf entry
and Finit will spawn the getty immediately.
A future patch will add support for `noclear` as well to external getty,
as well as a change in default (=> `wait`) for the built-in getty.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
In commit eec32e2 support for reloading TTY configurations was added.
This patch is a follow-up to that with support for cleaning up and
removing allocated TTYs.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
When the TTY fallback mechanism is enabled tty_fallback() prints this
annoying debug message whenever *any* is process is collected by PID 1:
"Not starting fallback (%d) shell, lost pid %d", fallback, lost"
This patch removes it, and a two other useless debug messages.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>