When the main process of a service exits, Finit sends SIGKILL to its
process group. That killed the action script of avahi-autoipd, which
it runs on SIGTERM to deconfigure the interface, before it was done.
Add stop-scope, in the block format and as the stop-scope: token:
service avahi-autoipd {
stop-scope = "process"
command = "avahi-autoipd eth0"
}
- pgroup: the stop signal to the main process, SIGKILL to its
process group when it exits, as before and the default
- process: only the main process
- cgroup: the stop signal to all of the cgroup, SIGKILL to the rest
- mixed: the stop signal to the main process, SIGKILL to the rest of
the cgroup, like systemd's KillMode=mixed
SIGKILL to a cgroup uses cgroup.kill when the kernel has it. Without
a cgroup, cgroup and mixed fall back to the process group. Services
in the same .conf file share a cgroup, Finit warns when one of them
uses a cgroup scope.
Fixes#413
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Stopping a forking service after its start script had exited, but
before the daemon had written its PID file, did not hold. When the
PID file showed up, the service was reported running again and the
daemon was left alone:
initctl stop ext
service_forked() cleared any block on the service, the user's stop
included.
Keep a user stop, and let the state machine stop the late daemon of
a service no longer enabled. The service is briefly RUNNING on its
way to STOPPING, so service/NAME/running blinks on and off.
Follow-up to #452
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A stopped service with a daemon-owned PID file came back as running
when another process wrote that file, e.g., a container started by
hand:
sudo podman start dash
turned container:dash from stopped to running in initctl, with the
podman PID adopted, moved to the service's cgroup, and its conditions
set. The same happened to a service waiting for its conditions.
The plugin acted on any new or changed PID file, only skipping
services stopping or running scripts, and service_forked() then
cleared the stop.
Only let a service that is starting or running claim its PID file.
Fixes#452
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A notify:systemd service that calls sd_notify() early could lose its
READY=1 and never become ready. Seen with udevd in an initramfs.
The socket address contained the PID of the service, so it was bound
in the parent after fork(), racing the service.
Let the kernel pick a unique abstract address instead, bound before
fork(), and pass it in NOTIFY_SOCKET.
Fixes#505
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
After a SIGHUP, from initctl reload or a changed service, Finit waits
for a pid-notify daemon to recreate or touch its PID file to reassert
readiness. keventd only reloaded its rules, so with a daemon-owned
PID file it never did.
Touch it with pidfile() after reloading the rules, once keventd has
created it. With -c that is after the coldplug queue has drained.
Fixes#503
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Changing a service from @alice:wheel to @alice, or removing group from
a block, and reloading kept the service running as group wheel, also
after a restart.
The group is only set when the configuration has one, and on reload
the service is updated in place, so the old one stayed.
Clear it before parsing, like a new service gets it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A service listing more than four supplementary groups, in extra-groups
or as @user:group,sup1,sup2,..., got only the first four:
too many supplementary groups, max 4
The names were stored in a fixed array of four. It was also only
reset when the new configuration listed groups, so groups dropped from
a service lingered until reboot.
Store the list as one string, split when the service starts, and set
it on every (re)registration. A list longer than 511 characters drops
the name it cuts off, which may otherwise match another group.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A run/task/service whose command starts like an option without a ':'
lost its command, e.g. the example in finit.conf(5):
run [2345] @joe:users logger "Hello world"
was registered as the log option, running "Hello world". Same for
pidof, pidproxy, cgroupfs-mount, and in block format too.
The option parser matches with MATCH_CMD(), a prefix match, also for
the options with no trailing ':' to end the prefix: log, pid, cgroup,
respawn, nowarn, and the rest.
Match these against the whole token, allowing only the separator that
starts a value: "log:", "pid:", "cgroup." and "cgroup:".
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A command that takes -- as an argument lost it, and everything after
it, to the description:
service name {
command = "cmd -- arg"
description = "a cmd"
}
ran `cmd` with description `arg`.
The block translator builds a legacy one-liner, appending the
description as "-- text", and service_register() splits that line at
the first "-- ", here the one in the command.
Split the description off only for legacy one-liners. Blocks now hand
it to the new service_register_desc() as an argument.
Fixes#512
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
disk_serial_id() falls back to <disk>/../serial so a partition got a
by-id link named after its parent disk's serial, clobbering the link
created for the whole disk.
(cherry picked from commit 4b2f8c89c5)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A completed remain task unconditionally cleared its user stop block
after running its post script. Since it was still valid in the current
runlevel, it immediately started again, making initctl stop ineffective.
Keep explicit stops blocked, distinguish automatic and requested
restarts, and route initctl restart through teardown before rerunning the
task. Cover stop, start, restart, reload, and runlevel transitions with
a regression test.
Signed-off-by: zhangxiaohui <xiaohui.zhang@wbstar.com>
A service whose condition goes into flux during a reload is paused
with its reload still pending. If another reload was requested in
the meantime, re-parsing its unchanged .conf file cleared the pending
mark, so the service was resumed without ever being reloaded. Seen
with sshd <pid/syslogd> on Infix, where a configuration change that
touched both landed as two reloads in a row and sshd kept its old
listen addresses.
The mark is only ever cleared once the change has been applied, so a
mark that is still set when the file is parsed again means exactly
that: not applied yet. Leave it alone.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Covers the longer user and group names, the tmpfiles mode and owner
work, the shutdown remount order, and the stop/reload script timeout.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Same treatment as d/D got: e went through fisdir() and a path based
chmod/chown, f/F did the chmod/chown by path after closing the file.
Both now work on the open fd, so the mode and owner end up on the
directory or file that was just checked or written. f/F use open(2)
directly, which lets a plain f rely on O_EXCL for create-if-missing
instead of the earlier stat().
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
(cherry picked from commit 75739fbeef)
makedir() swallows EEXIST, so the chmod branch for directories that
already existed never ran, while chown() ran every time. On finix
/var/empty is immutable, which gave a warning on every boot even
though the owner was already correct.
mksubsys() is the original of this code and has the same shape, the
dbus plugin uses it for /tmp/dbus. Both now go through dirperm(),
which opens the directory and uses fstat/fchmod/fchown on the fd,
changing only what differs. A failed chown in mksubsys() is a warning
now rather than err(1), PID 1 should not exit over a directory it
cannot adjust.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
(cherry picked from commit 3a72d1263c)
Return a failure status from unmount_regular() when filesystems remain
mounted, and use it to report the final shutdown unmount result.
Signed-off-by: Anees Rehman <anees.rehman@atlascopco.com>
Only fall back to the regular mount invocation when both
fstab-independent root remount attempts fail.
This avoids reading an encrypted fstab during a normal shutdown.
Signed-off-by: Anees Rehman <anees.rehman@atlascopco.com>
Service user and group names are stored in 16-byte buffers, limiting
them to 15 characters. This silently truncates longer names before
getpwnam() and getgrnam(), preventing services configured with valid
longer account names from starting.
Increase the buffers to match the existing maximum configuration
argument length.
Signed-off-by: Anees Rehman <anees.rehman@atlascopco.com>
Apply a PAM session to run/task/sysv/services Finit starts, pam_limits
above all, so a service running as a given user picks up that user's
limits the way a login does.
Add a new `pam` setting for the new block format (only), like the
per-service directories, naming a file in /etc/pam.d:
service weston {
user = "weston"
pam = "weston-autologin"
command = "/usr/bin/weston --continue-without-input"
}
pam_close_session() has to be called by a process still holding the
handle, and the handle does not survive exec(). Hence the keeper: it
holds the handle, drops to the service's credentials, and waits for a
parent-death signal before closing the session. Same shape as
systemd's (sd-pam), for the same reason, and one per fork, so the
script hooks open and close their own.
The keeper closes the descriptors it inherited from Finit and only
those. Closing everything would also take out what pam_open_session()
opened for itself, a keyring fd or a lock file, and leave the modules
to close a session with those pulled out from under them. Closing
nothing, as (sd-pam) does, would leave it holding the write end of the
notify pipe for the service's whole lifetime and starve notify = "s6"
services of their ready signal. So the fds open before pam_start()
are snapshotted and exactly those are closed, while the ones PAM opens
after are marked close-on-exec so the daemon does not inherit them
either.
A refused value, a denied account stack, an uninstalled pam.d file,
and a build without PAM support all keep the service from starting
rather than running it with the stacks skipped: one that quietly loses
pam_limits and its private /tmp, with nothing said. Capabilities a
module like pam_cap.so granted are merged into the IAB Finit applies
instead of being replaced by it, which only helps a service that also
sets capabilities, the other arm being a plain setuid() with nothing
left to restore once permitted is empty.
The test sysroot gains pam_permit.so, pam_deny.so and pam_limits.so,
which ldd cannot see, libpam dlopen()s them, and the test skips when
the host has none to stage. The negative cases pin the exit status
rather than only asserting crashed, which serv reports for any early
exit, so a bad command or an unwritable pidfile cannot pass for a
rejected session.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The ChangeLog is hard-wrapped at 72 columns, which the GitHub releases
page renders verbatim as a ragged right edge. Join the continuation
lines of each paragraph and list item, as already done in Infix, and
let the browser do the wrapping.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
GitHub now shows a sha256 digest for every uploaded release asset, so
the sidecar hash files only clutter the asset list.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Building it by default installs our libsystemd.so.0 in $libdir. Where
the real one is already present, and contrib/debian/build.sh configures
--prefix=/usr --exec-prefix= on a Debian host, ours outranks it in the
loader cache, and every program linking libsystemd loses
sd_journal_stream_fd and the LIBSYSTEMD_209 symbol versions. The test
sysroot ran into exactly that, dbus-daemon exited 127 on every restart.
Restore the default to no. sulogin and watchdogd stay on, they only add
binaries. distcheck asks for the library so it stays covered.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
dbus-broker fails, the bus never comes up:
Service dbus[19] died (exit status: 127), restarting
The sysroot stages dbus-daemon from the host, which links the real
libsystemd, and since v5.0 builds ours by default the install puts a
second libsystemd.so.0 in the sysroot. It wins the ld.so cache, and
dbus-daemon finds neither sd_journal_stream_fd nor the LIBSYSTEMD_209
symbol versions in it.
Uninstall the library from the sysroot after the install. The test serv
compiles sd-daemon.c in, so nothing there needs it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
v5.0 ships keventd and the D-Bus support enabled out of the box, but the
remaining bundled pieces stayed opt-in, and the help text for two of them
already claimed otherwise.
Default all three to yes; --without-sulogin, --without-watchdog, and
--without-libsystemd opt out. The distcheck and CI configure lines drop
the flags they no longer need, so CI exercises the defaults.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
make distcheck fails in install:
/usr/bin/install: cannot create regular file '/etc/dbus-1/system.d/org.finit.conf': Permission denied
The policy was installed to $sysconfdir/dbus-1/system.d. distcheck only
overrides the prefix, so the file escaped its sandbox and aimed for the
real /etc.
Install it where dbus looks for package owned policy, leaving
/etc/dbus-1/system.d to the admin. The test bus config reads it
relative to itself.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
fuzz-msg-parse.sh looked for its driver next to the script, which only
holds when srcdir and builddir are the same. Every VPATH build skipped
the sweep, claiming D-Bus was off:
SKIP: fuzz-msg-parse.sh
distcheck, and with it the release job, is a VPATH build. Use
top_builddir, which the test environment already exports.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
make distcheck fails in dbus-device:
sh: /libexec/finit/keventd: not found
distcheck configures with --prefix=$(distdir)/_inst, so the bundled
helpers install below that prefix, not in /libexec/finit, which the test
had hard coded.
Export the configured pkglibexecdir as FINIT_EXECPATH in test.env and
run keventd from there, the same path finit itself is built with.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The engine covers most of the udev grammar but not all of it, and the
gaps are invisible until a rule silently does nothing. Write down what
is implemented and where it parts ways with udev(7), rather than
leaving people to infer it from a ruleset that happens to work. The
man page gets the directory precedence and a pointer to udev(7) and
the User's Guide, which hold the details.
Rename the menu entry to Device Manager while here, matching how the
watchdog daemon is listed.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>