Standard init implementations save current and previous runlevels
in utmp, now finit does too. Also, the initial runlevel at boot
has changed from 10 to the more obvious 0.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Add support for runlevels to tty command and support for reading baud
rate and TERM variable from finit.conf.
The tty-watcher thread has been converted to a standard I/O plugin.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Most systems need an early bootstrap phase for one-shot tasks and
necessary one-time probing. This phase usually runs well before any
networking is setup. This commit adds support for that 'S' runlevel,
and also extends the number of possible total runlevels to nine.
For the one-shot tasks that run in bootstrap two new finit.conf cmds
have been added:
- task: For one-shot tasks that can be started in parallell
- run: For one-shot tasks that must run in sequence
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Like most other init implementations do, when entering runlevel 1, finit
creates the file /etc/nologin to prevent users from logging in during
single-user mode, this file is then removed upon leaving runlevel 1.
Also, bugfix how FIFO I/O plugins are handled in finit. A FIFO will
need to be reopened by the server side when the client closes the pipe.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This commit adds a statistics counter to the finit svc_t process struct
which is incremented every time a process is restarted by the service
monitor.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Many callbacks check their svc->pid to determine SVC_RELOAD or SVC_START,
they rely on it to be updated. When a service is lost we must therefore
clear its recorded PID before asking the callback what to do.
Also, swap comparison in debug code for dumping service arguments ...
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
The run_parts() implementation used variable arguments in a bad way,
resulting in it not working properly. Replaced va_*() code with a
simple cmd argument that's passed to each script called.
Also, the opendir()/readdir() code has been replaced with scandir()
using regular alphasort(). This simplifies the code somewhat as well.
Otherwise, minor cleanups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Sometimes people type in the wrong path to a service directive in
finit.conf, or the executable isn't installed. This commit makes
sure to check if the command exists before attempting to start it.
This also means that we now require service commands to start with
/ to indicate an absolute path. We used to search the PATH for a
suitable executable, using execvp(), but that's rather insecure as
well, so we now use only execv().
Also, added support for adding "start" or "stop" to entries found
in /etc/finit.d starting with SNNname, or KNNname, where NN is a
number. This makes it possible to simply import sysvinit style
start scripts from /etc/rcS.d and /etc/rcN.d/.
The alsa-utils plugin also had some minor fixes, added -g option
to ignore non-existing soundcards and fixed cut-paste bug on the
_d() debug messages.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Restructure start by calling the plugin loader earlier. This makes it
possible to run hooks even earlier. This also adds a new hook:
HOOK_ROOTFS_UP which runs as soon as the system root (/) is available.
Another very notable change is the slow refactor of helpers.c into a finit
helper library called libite.so (-lite). This is a light-weight
Also, lots of misc. fixes all over the place. Signal handling still really
needs to be looked into once more!
Makefile:
Add dependency handling for parallell build
Add libite library
ChangeLog:
Update with new 1.4 release. There is a lot of fixes!
libite/:
Collection of utility functions and C library extensions for
finit & its plugins
reboot.c:
New reboot tool. Simply sends SIGINT to PID 1
finit.h:
Cleanup old LISTEN_INITCTL define, code is in an optional plugin now
finit.c:
Let mdev/udev run *after* cls()
Add useful debug statement for /proc/cmdline
Earlier plugin load => new early hook point
Show OK/FAIL for total plugin load, not for each plugin => speedup
helpers.h:
Rename syslog macros to prevent common name clashes (DEBUG/ERROR)
Add __FILE__ to _e(), _d() and _pe() macros
helpers.c:
In ifconfig() the addr and mask arguments are now optional
The copyfile() has been moved to libite.so
Temporarily remove const directive from some functions to build
Use DFLSIG() macro in run_getty() to simplify code
plugin.h:
Add new HOOK_ROOTFS_UP hook
plugin.c:
Fix init_plugins() to actually register the plugin's I/O fd
Skip verbose listing of all plugins in plugin_load_all()
svc.c:
svc_start(): Dito
plugins/Makefile:
Inherit CFLAGS and LDFLAGS, but make sure to filter out -rdynamic
from LDFLAGS, it's used by the daemon, only
plugins/initctl.c:
New includes after helpers.h refactor
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This commit removes a lot of unnecessary overhead for handling external
service plugins. Instead of traversing the plugin array every time a
service callback should run we set the plugin callback in the svc_t when
the plugin is registered.
Also, make sure to check for norespawn/SIGSTOP in svc_reload() as well.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Improve upon API names, both internal and external, to make it clearer
where methods are located and clarify responsibility.
Add new Makefile target "dev" to create untagged development snapshots.
Bump version for upcoming release.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Move utility macros from finit.h to helpers.h and continue refactoring
and streamlining of public plugin API.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This commit adds support for calling plugin hooks when all services
have been started properly. Useful for, e.g., a 3rd party service
monitor to trigger further events on.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Tried to solve the signal.h name clash by using #include_next, but
seeing as this is not recommended[1] and breaks builds on some cross
compilers, the files were simply renamed: signal.[ch] --> sig.[ch]
[1] - http://gcc.gnu.org/onlinedocs/cpp/Wrapper-Headers.html
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Due to time constraints I had to revert the new libev backend to the
service, I/O and signals monitor. Employed instead is the tried and
tested signals based service monitor, with a small extension for an
additional I/O monitor using poll() for the I/O plugins to use.
Tried restoring the startx finit.conf directive on top of the service
implementation. However, it's currently not usable to run /usr/bin/startx
for any other user than root. I recommend using the examples/finit.conf
and run /usr/sbin/gdm instead.
finit.c:
New run_loop() function, replaces libev ev_run().
helpers.c:
Refactor start_process() into svc_start().
plugin.c:
Add fds[] array for use in the io_monitor() called by the
new run_loop().
signal.c:
Ignore SIGCHLD. Handled by waitpid() in svc_monitor() now,
which is called by the new run_loop().
svc.c:
svc_register(): Optional @username parsing for the command line.
svc_monitor(): Replaced libev callback with waitpid()
svc_start(): Refactored to use most of helpers.c:start_process()
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Lots of cleanup and simplification of the main code in this commit.
Most notably libev has been added to take care of the main loop and
monitor services. Still TODO is migrating to use the libev signal
handling.
Convert initctl.c:listen_initctl() to a plugin instead. This also
meant introducing a new form of I/O plugin to finit, also handled
by libev.
Load plugins *after* we've setup the base filesystem (BASEFS) in case
plugins reside on a filesystem not reachable before "mount -a" has run.
This also has the side effect of lining up nicely with the first level
plugin hooks.
If a plugin wants to hook up with a loded service we connect them by
their respective numeric IDs in plugin_register(). I.e., the service
monitor checks if a service has a registered callback, which in turn
decides if a service should be started, stopped or reloaded.
Rip out old EeePC distribution defines from finit.h, none of it really
applies anymore. If you need distribution specific settings this is
the place to put them.
Make hookpoint names (#defines) clearer: after BASEFS, after networking,
after all setup, etc.
Use #inlude_next <signal.h> in signal.h to include system header file!
Simplify service monitor: move essential code to svc.c and rip out
the TIPC dependency. Write your own service.so plugin, or wait for
a more complete example of how to extend service monitoring using
the primitives in svc.c
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
finit.c:
o New service and shell_service stanzas for finit.conf
o Run service_startup() before /etc/finit.d/ hooks
o Run service_monitor() at end of startup
helpers.c:
o Several new functions:
- print_desc() displays a service starting up
- print_result() shows if service started OK or not
- start_process() is used by the services framework
svc.c:
Generic API for managing svc_t structures
ipc.o:
TIPC based framework for communicating with the service monitor.
E.g., to relay (re)configuration signals from a Web/CLI
front-end via finit to one or many setup daemons, and back.
services.c:
Service monitor framework
strlcpy.c:
Secure strncpy() replacement from OpenBSD under the free ISC License.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Joachim Nilsson