This also adds support for monitor /dev for TTYs appering after boot,
USB-to-serial converters for example.
Some limitations: Baudrate (and other settings) is hardcoded for now,
should be read from config file.
This commit adds support for the "runparts <DIR>" directive to
finit.conf. Enabling the user to override the built-in default,
which by default is /etc/finit.d.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Restructure start by calling the plugin loader earlier. This makes it
possible to run hooks even earlier. This also adds a new hook:
HOOK_ROOTFS_UP which runs as soon as the system root (/) is available.
Another very notable change is the slow refactor of helpers.c into a finit
helper library called libite.so (-lite). This is a light-weight
Also, lots of misc. fixes all over the place. Signal handling still really
needs to be looked into once more!
Makefile:
Add dependency handling for parallell build
Add libite library
ChangeLog:
Update with new 1.4 release. There is a lot of fixes!
libite/:
Collection of utility functions and C library extensions for
finit & its plugins
reboot.c:
New reboot tool. Simply sends SIGINT to PID 1
finit.h:
Cleanup old LISTEN_INITCTL define, code is in an optional plugin now
finit.c:
Let mdev/udev run *after* cls()
Add useful debug statement for /proc/cmdline
Earlier plugin load => new early hook point
Show OK/FAIL for total plugin load, not for each plugin => speedup
helpers.h:
Rename syslog macros to prevent common name clashes (DEBUG/ERROR)
Add __FILE__ to _e(), _d() and _pe() macros
helpers.c:
In ifconfig() the addr and mask arguments are now optional
The copyfile() has been moved to libite.so
Temporarily remove const directive from some functions to build
Use DFLSIG() macro in run_getty() to simplify code
plugin.h:
Add new HOOK_ROOTFS_UP hook
plugin.c:
Fix init_plugins() to actually register the plugin's I/O fd
Skip verbose listing of all plugins in plugin_load_all()
svc.c:
svc_start(): Dito
plugins/Makefile:
Inherit CFLAGS and LDFLAGS, but make sure to filter out -rdynamic
from LDFLAGS, it's used by the daemon, only
plugins/initctl.c:
New includes after helpers.h refactor
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Move utility macros from finit.h to helpers.h and continue refactoring
and streamlining of public plugin API.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Due to time constraints I had to revert the new libev backend to the
service, I/O and signals monitor. Employed instead is the tried and
tested signals based service monitor, with a small extension for an
additional I/O monitor using poll() for the I/O plugins to use.
Tried restoring the startx finit.conf directive on top of the service
implementation. However, it's currently not usable to run /usr/bin/startx
for any other user than root. I recommend using the examples/finit.conf
and run /usr/sbin/gdm instead.
finit.c:
New run_loop() function, replaces libev ev_run().
helpers.c:
Refactor start_process() into svc_start().
plugin.c:
Add fds[] array for use in the io_monitor() called by the
new run_loop().
signal.c:
Ignore SIGCHLD. Handled by waitpid() in svc_monitor() now,
which is called by the new run_loop().
svc.c:
svc_register(): Optional @username parsing for the command line.
svc_monitor(): Replaced libev callback with waitpid()
svc_start(): Refactored to use most of helpers.c:start_process()
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
New function helpers.c:run_getty() refactored from main(). Used to
start a default console getty.
Removed startx finit.conf option, superseded by service statement,
see examples/finit.conf for a working use case.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Lots of cleanup and simplification of the main code in this commit.
Most notably libev has been added to take care of the main loop and
monitor services. Still TODO is migrating to use the libev signal
handling.
Convert initctl.c:listen_initctl() to a plugin instead. This also
meant introducing a new form of I/O plugin to finit, also handled
by libev.
Load plugins *after* we've setup the base filesystem (BASEFS) in case
plugins reside on a filesystem not reachable before "mount -a" has run.
This also has the side effect of lining up nicely with the first level
plugin hooks.
If a plugin wants to hook up with a loded service we connect them by
their respective numeric IDs in plugin_register(). I.e., the service
monitor checks if a service has a registered callback, which in turn
decides if a service should be started, stopped or reloaded.
Rip out old EeePC distribution defines from finit.h, none of it really
applies anymore. If you need distribution specific settings this is
the place to put them.
Make hookpoint names (#defines) clearer: after BASEFS, after networking,
after all setup, etc.
Use #inlude_next <signal.h> in signal.h to include system header file!
Simplify service monitor: move essential code to svc.c and rip out
the TIPC dependency. Write your own service.so plugin, or wait for
a more complete example of how to extend service monitoring using
the primitives in svc.c
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
finit.conf:
Use this as /etc/finit.conf on a Debian 6.0 based system with X
installed and sysklogd instead of rsyslogd. Works.
services:
Alternative method for extending the finit boot procedure. Simply
place this script file in an /etc/finit.d/ directory. The script
uses the standard run-parts tool to chain load other start scripts.
helpers.c:
o New functions:
- run(): home grown system() replacement
- run_interactive(): display progress and status when called
o Bugfix start_process(), make sure to use same signal setup for
children as in run() and run_interactive(). Also, use execvp()
instead of execv() to allow searching $PATH for executables.
finit.h:
o Move signal specific code to new signal.h.
o Bypass verbosity setting to let echo() always print to screen.
finit.c:
o Make run_parts() the default, remove external deps, it works.
o Use run() and run_interactive() to speed up execution further
on embedded systems where forking is expensive.
o Kernel cmdline "quiet" should not close STDIO since this makes
it impossible to run some daemons and start scripts. Instead,
we let "quiet" toggle the finit verbosity setting.
o Remove kernel cmdline "--verbose" (Upstart compat), to be used
to enable verbose finit when kernel should be quiet.
o Setup kernel specific settings in /etc/sysctl.conf
o Fix D-Bus startup problems. Probably what caused X from not
working initially. Silly rabbit.
o Use system() workaround to start X, cannot get it to start
at all using run() or run_interactive() at the moment.
signal.h:
New file, header file for signal.c. Was about time.
signal.c:
Remove blocking of SIGCHLD from sig_setup(), instead we setup
SIGCHLD early in sig_init() to handle fork() in run() & C:o.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
finit.c:
o New service and shell_service stanzas for finit.conf
o Run service_startup() before /etc/finit.d/ hooks
o Run service_monitor() at end of startup
helpers.c:
o Several new functions:
- print_desc() displays a service starting up
- print_result() shows if service started OK or not
- start_process() is used by the services framework
svc.c:
Generic API for managing svc_t structures
ipc.o:
TIPC based framework for communicating with the service monitor.
E.g., to relay (re)configuration signals from a Web/CLI
front-end via finit to one or many setup daemons, and back.
services.c:
Service monitor framework
strlcpy.c:
Secure strncpy() replacement from OpenBSD under the free ISC License.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Update license and copyright information details in all files.
Much cleanup by moving hard coded strings/data to #defines and using more
common default values for each such #define.
finit.c:
o Make sdown[], startx[] allocated strings by default NULL
o This fixes the issues where the shutdown handler segfaulted
o Add ability to handle NULL input to build_cmd() by allocating space
o Ignore kernel cmdline "quiet" if in debug mode
o Add support for "network" stanza in finit.conf
o Mount -n to skip removing /etc/mtab
o Call swapon to enable swap if enabled in /etc/fstab
o Cleanup /tmp, /var/run and /var/lock
o Move sig_setup() *after* mount, sig_init() otoh runs early
o Start initctl monitor before forking off startx/getty process
o The startx process is now the console process. Only a getty is
started when in debug mode. Otherwise only X is started if it
is properly setup in /etc/finit.conf
o NOTE: Currently X evdev does not work!
o Support for /usr/sbin/services.sh has been replaced with finit
now instead supporting builtin run-parts for /etc/finit.d/
helpers.c:
o Bug fixes in run_parts() and also added chdir(oldpwd) at bottom.
o New functions:
- getuser() similar to getgroup()
- cls() clear screen, only runs when not in debug mode
- set_procname() used to set name "console" on console process
- set_hostname() encapsulates /etc/hostname and sethostname()
signal.c:
o Split sig_setup() in two: sig_init() and sig_setup()
The former to be called as soon as possible, while latter is
supposed to run when the base filesystem is properly up.
o Remove hard coded distribution specific progress bar write()
o Add debug messages to do_shutdown()
o Remove any lingering sync files in sig_setup()
initctl.c:
o Add debug messages and a new default: case to catch stray runlevels
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Cleanup device creation and initial mount by assuming that the kernel
has devtmpfs enabled. This is the default for most modern GNU/Linux
distributions. See http://lwn.net/Articles/331818/ for more info.
Also, since finit is targeted at deeply embedded systems hooks for the
BusyBox udev replacement, mdev has been added. If MDEV is defined in
the build it will take care of both hotplugging of devices and initial
setup of /dev
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
finit.c:
o Perform signal setup as soon as possible, no need to do any
mounting of /proc or /sys beforehand
o Move signal setup and callbacks to a file of its own
o Use more #defines for hard coded strings
o Use a more neutral default hostname
signal.c:
o New file, for setup and signal handlers
o Add support for SIGSTOP/SIGSTP and SIGCONT. This pauses finit
respawning of xinit/shell. Useful for, e.g., debugging
o Document each ignored and handled signal better
o Disable SIGUSR1 and SIGUSR2 for now, will be reenabled later
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
This commit is in preparation for importing the Westermo code changes.
Slowly refactoring the finit core into a more modularized unit to be a
bit more maintainable.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Mattias Walström