Add run target for running Finit as a stand alone unprivileged process

It could be very useful, during development, to be able to run Finit on a host system without having to provision a full VM. We have all the building blocks for easily containerizing Finit - in the test framework - so adding a "run" target that does the orchestration makes sense. Signed-off-by: Jacques de Laval <jacques@de-laval.se>
test: Use STDOUT of parent process instead of a pipe as tty for finit
2026-10-18 10:59:34 +00:00 · 2021-03-05 01:39:42 +01:00 · 2021-03-05 01:24:31 +01:00 · 2021-03-03 07:06:17 +01:00 · 2021-03-03 07:05:55 +01:00 · 2021-03-02 22:33:41 +01:00
196 changed files with 6157 additions and 4763 deletions
@@ -1,4 +1,5 @@
-# Contributor Code of Conduct
+Contributor Code of Conduct
 ===========================
 As contributors and maintainers of this project, and in the interest of
 fostering an open and welcoming community, we pledge to respect all
@@ -66,9 +66,6 @@ how `git commit -s` is used to automatically add a `Signed-off-by`:
    Signed-off-by: Jane Doe <jane.doe@example.com>
 Another good *counter* example [is this][rambling] ...
 Code of Conduct
 ---------------
@@ -79,11 +76,4 @@ Bill & Ted; [be excellent to each other][conduct].
 [github]:   https://github.com/troglobit/finit/
 [KNF]:      https://en.wikipedia.org/wiki/Kernel_Normal_Form
 [gitbook]:  https://git-scm.com/book/ch5-2.html
-[rambling]: http://stopwritingramblingcommitmessages.com/
+[conduct]:  CODE-OF-CONDUCT.md
 [conduct]:  https://github.com/troglobit/finit/blob/master/CODE-OF-CONDUCT.md
 <!--
  -- Local Variables:
  -- mode: markdown
  -- End:
  -->
@@ -0,0 +1,3 @@
 # These are supported funding model platforms
 github: [troglobit]
@@ -0,0 +1,12 @@
 # Security Policy
 ## Supported Versions
 finit is a small project, as such we have no possibility to support older versions.
 The only supported version is the latest released on GitHub:
 <https://github.com/troglobit/finit/releases>
 ## Reporting a Vulnerability
 Contact the project's main author and owner to report and discuss vulnerabilities.
@@ -9,11 +9,13 @@ GSYMS
 GTAGS
 # GNU configure and build system
 /aux
 /.deps
 /autom4te.cache
 /aclocal.m4
 /ar-lib
 /compile
 /config.cache
 /config.h
 /config.mk
 /config.guess
@@ -31,6 +33,9 @@ GTAGS
 /Makefile.in
 /stamp-h1
 /test-driver
 /test-suite.log
 # TroglOS build system
 /.config
 /.stamp
@@ -9,14 +9,16 @@ sudo: false
 #sudo: true
 # Test build with both GCC and Clang (LLVM)
 #  - clang
 compiler:
  - gcc
  - clang
 # The secure: declaration is the encrypted COVERITY_SCAN_TOKEN, created
 #   via the "travis encrypt" command using the project repo's public key
 env:
  global:
-   # The next declaration is the encrypted COVERITY_SCAN_TOKEN, created
+   - PKG_CONFIG_PATH=/tmp/lib/pkgconfig
-   #   via the "travis encrypt" command using the project repo's public key
+   - CFLAGS="-W -Wall -Wextra"
   - secure: "eOiuHs02lG2Uv146K9dMqucGTWUJFEhpz1oAtwe+kPrRXsXWc20hYMO+DSpMgD05vSvNeQA6p7h7LdRFQ+/g/Obj27TsOE+RKkUvRAtdwzxnKVyii9C/nmML8cFw7rIA0VS8O9mAkVYeyDxNDupBp3e9DPCibhKPvqCvioTnyy4="
 addons:
@@ -28,25 +30,25 @@ addons:
      name: "troglobit/finit"
      description: "finit | Fast & Extensible init for Linux"
    notification_email: troglobit@gmail.com
-    build_command_prepend: "./autogen.sh && PKG_CONFIG_PATH=/tmp/lib/pkgconfig ./configure --prefix=/tmp"
+    build_command_prepend: "./autogen.sh && ./configure --prefix=/tmp"
    build_command: "make"
    branch_pattern: dev
 install:
-  - wget https://github.com/troglobit/libuev/releases/download/v2.2.0/libuev-2.2.0.tar.xz
+  - wget https://github.com/troglobit/libuev/releases/download/v2.3.2/libuev-2.3.2.tar.xz
-  - wget https://github.com/troglobit/libite/releases/download/v2.0.1/libite-2.0.1.tar.xz
+  - wget https://github.com/troglobit/libite/releases/download/v2.3.1/libite-2.3.1.tar.gz
-  - tar xf libuev-2.2.0.tar.xz
+  - tar xf libuev-2.3.2.tar.xz
-  - tar xf libite-2.0.1.tar.xz
+  - tar xf libite-2.3.1.tar.gz
-  - (cd libuev-2.2.0 && ./configure --prefix=/tmp && make && make install-strip)
+  - (cd libuev-2.3.2 && ./configure --prefix=/tmp && make && make install-strip)
-  - (cd libite-2.0.1 && ./configure --prefix=/tmp && make && make install-strip)
+  - (cd libite-2.3.1 && ./configure --prefix=/tmp && make && make install-strip)
 # Custom build script for the time being, no "make test" yet
 script:
  - ./autogen.sh
-  - PKG_CONFIG_PATH=/tmp/lib/pkgconfig ./configure --prefix=/tmp --disable-inetd --enable-static
+  - ./configure --prefix=/tmp --enable-static
  - make clean
  - make V=1 -j5
-  - PKG_CONFIG_PATH=/tmp/lib/pkgconfig ./configure --prefix=/tmp --enable-inetd-echo-plugin --enable-inetd-time-plugin --enable-x11-common-plugin --enable-inetd-chargen-plugin --enable-fallback-shell --enable-watchdog
+  - ./configure --prefix=/tmp --enable-x11-common-plugin --enable-fallback-shell --enable-watchdog --enable-logit
  - cat config.log
  - make clean
  - make V=1 -j5
@@ -57,3 +59,7 @@ script:
  - size /tmp/sbin/initctl
  - size /tmp/sbin/reboot
  - LD_LIBRARY_PATH=/tmp/lib /tmp/sbin/initctl -h
  - unshare -V
  - nsenter -V
  - chroot --version
  - 'LD_LIBRARY_PATH=/tmp/lib make distcheck || (cat finit-4.0-beta1/_build/sub/test/test-suite.log; exit 1)'
@@ -1,10 +1,12 @@
 Current Maintainer(s):
- * Joachim Nilsson <troglobit@gmail.com>
+ * Joachim Wiberg <troglobit@gmail.com>
 Major Contributors:
 * Tobias Waldekranz <tobias@waldekranz.com>
 * Mattias Walström <mattias.walstrom@westermo.se>
 * Jonas Johansson <jonas.johansson@westermo.se>
 * Jacques de Laval <jacques@de-laval.se>
 * Magnus Malm <magnusmalm@gmail.com>
 Original Author(s):
 * Claudio Matsuoka <cmatsuoka@gmail.com>
@@ -4,14 +4,45 @@ Change Log
 All relevant changes are documented in this file.
-[3.2][UNRELEASED] - 2018-10-xx
+[4.0][UNRELEASED] - 2021-02-21
 ------------------------------
-Bug fix release.
+This release became v4.0, and not v3.2, because of incompatible changes
 to service conditions.  There are other significant changes as well, so
 make sure to read the whole changelog when upgrading.
 ### Changes
-* Add support for `--disable-docs` and `--disable-contrib` to speed up
+* The stand-alone `reboot` tool has been replaced with a symlink to
  `initctl`, like its siblings: halt, shutdown, poweroff, and suspend.
  Calling `reboot` & C:o now defaults to the corresponding `initctl cmd`
  with a fallback to sending signals as per traditional SysV init.  The
  `-f` (force) flag remains, where `reboot(2)` is called directly
 * Introducing Finit progress 𝓜𝓸𝓭𝓮𝓻𝓷
 * Removed built-in inetd super server.  If you need this functionality,
  use an external inetd, like xinetd, instead.  A pull request for a
  stand-alone inetd, like watchdogd and getty, is most welcome!
 * Incompatible `configure` script changes, i.e., you must give proper
  path arguments to the script, no more guessing just GNU defaults.
  There are examples in the documentation and the `contrib/` section
 * Change service conditions from the non-obvious `<svc/path/to/foo>` to
  `<pid/foo:id>`.  This to hopefully make it clear that one service's
  'pid:!foo' pidfile is another service's `<pid/foo>` condition
 * Initial support for cgroups, every service now runs in its own cgroup
  https://twitter.com/b0rk/status/1214341831049252870?s=20
 * Major refactor of Finit's `main()` function to be able to start the
  event loop earlier.  This also facilitated factoring out functionality
  previously hard-coded in Finit, e.g., starting the bundled watchdogd,
  various distro packed udevd and other hotplugging tools
 * Support for `sysv` start/stop scripts as well as monitoring forking
  services, stared using `sysv` or `service` stanza
 * Support for custom `kill:DELAY`, default 3 sec.
 * Support for custom `halt:SIGNAL`, default SIGTERM
 * Support for tracking custom PID files, using `pid:!/path/to/foo.pid`,
  useful with new `sysv` or `service` which fork to background
 * Support starting run/task/services without absolute path, trust `$PATH`
 * Add support for `--disable-doc` and `--disable-contrib` to speed up
  builds and work around issue with massively parallel builds
 * Add support for `@console` also for external getty
 * Add `-b`, batch mode, for non-interactive use to `initctl`
 * Prefer udev to handle `/dev/` if mdev is also available
 * Redirect dbus daemon output to syslog
@@ -19,7 +50,7 @@ Bug fix release.
 * Finit no longer automatically reloads its `*.conf` files after running
  `/etc/rc.local` or run-parts.  Use `initctl reload` instead.
 * `initctl` without an argument or option now defaults to list services
-* Converted built-in watchdog daemon to standalone mini watchdogd
+* Convert built-in watchdog daemon to standalone mini watchdogd, issue #102
 * Improved watchdog hand-over, now based on `svc_t` and not PID
 * Extended bootstrap, runlevel S, timeout: 10 --> 120 sec. before services
  not allowed in the runtime runlevel are unconditionally stopped
@@ -32,36 +63,66 @@ Bug fix release.
    event, because services may depend on each other
 * Require new libuEv API: `uev_init1()` to reduce event cache so that
  the kernel can invalidate deleted events before enqueing to userspace
 * Rename `hwclock.so` plugin to `rtc.so` since it now is stand-alone
  from the `hwclock` tool.  Note: the kernel can also be set to load
  and store RTC to/from system clock at boot/halt as well, issue #110
 * New plugin to support cold plugging devices, auto-loading of modules
  at boot.  Detects required modules by reading `/sys/devices/*`
 * New plugin for `/etc/modules-load.d/` by Robert Andersson, Atlas Copco
 * New `name:foo` support for services, by Robert Andersson, Atlas Copco
 * New `manual:yes` support for services, by Robert Andersson, Atlas Copco
 * New `log:console` support for services, by Robert Andersson, Atlas Copco
 * Support for `:ID` as a string, by Jonas Johansson, Westermo
 * Support for auto-reload, instead of having to do `initctl reload`,
  when a service configuration has changed.  Disabled by default, but
  can be enabled with `./configure --enable-auto-reload`
 * Support for logging security related events, e.g., runlevel change,
  star/stop or failure to start services, by Jonas Holmberg, Westermo
 * Mount devtpts with recommended `ptxmode=0666`
 * Mount /run tmpfs with nosuid,nodev,noexec for added security
 * Support for `console` as alias for `@console` in tty stanzas
 * Drop `--enable-rw-roots` configure option, use `rw` for your `/`
  partition in `/etc/fstab` instead to trigger remount at boot
 * Drop default tty speed (38400) and use 0 (kernel default) instead
 * Make `:ID` optional, use NULL/zero internally this allows ...
 * Handle use-cases where multiple services share the same PID filem
  and thus the same condition path, e.g. different instances for
  different runlevels.  Allow custom condition path with `name:foo`
  syntax, creates conditions w/o a path, and ...
 * Always append `:ID` qualifier to conditions if set for a service
 * The IPC socket has moved from `/run/finit.sock` to `/run/finit/socket`
  officially only supported for use by the `initctl` tool
 * Improved support for modern `/etc/network/interfaces`, which has
  include statements.  No more native `ifup` of individual interfaces,
  Finit now calls `ifup -a`, or `ifdown -a`, delegating all details to
  the operating system.  Also, this is now done in the background, by
  popular request
 ### Fixes
 * Fix #96: Start udevd as a proper service
 * Ensure we track run commands as well as task/service, once per runlevel
 * Fix #98: FTBFS with `--disable-inetd`
 * Make sure to unblock UDP inetd services when connection terminates.
  Regression introduced in v3.1
 * Ensure run/tasks also go to stopping state on exit, like services,
  otherwise it is unnecessarily hard to restart them
 * Fix #99: Do not try to `SIGKILL` inetd services, they are not backed
  by a PID.  This caused a use after free issue crashing finit.  Found
  and fixed by Tobias Waldekranz, Westermo
 * Fix missing OS/Finit title bug, adds leading newline before banner
 * Remove "Failed connecting to watchdog ..." error message on systems
  that do not have a watchdog
 * Fix #100: Early condition handling may not work if `/var/run` does
  not yet exist (symlink to `/run`).  Added compat layer for access
-* Fix #103: Register multiple getty if `@console` resolves to >1 TTY
+* Fix #103: Register multiple getty if `@console` resolves to >1 TTY,
 * Fix #105: Only remove /etc/nologin when moving from runlevel 0, 1, 6
 * Fix #106: Don't mark inetd connections for deletion at .conf reload.
  Fixed by Jonas Johansson, Westermo
-* Fix #107: Stop spawned inetd conncections when stopping inetd service.
+* Fix #109: Support for PID files in sub-directories to `/var/run`
-  Fixed by Jonas Johansson, Westermo
+* Handle rename of PID files, by Robert Andersson, Atlas Copco
-* Fix #111: Only restart inetd services when necessary.  E.g., if the
+* Fix #120: Redirect `stdin` to `/dev/null` for services by default
-  listening interface is changed.  Only stop established connections
+* Fix #122: Switch to `nanosleep()` to achieve "signal safe" sleep,
-  which are no longer allowed, i.e. do not touch already allowed
+  fixed by Jacques de Laval, Westermo
-  established connections.  Fixed by Jonas Johansson, Westermo
+* Fix #124: Lingering processes in process group when session leader
-* Fix: update inetd service args on config change.  Found and fixed by
+  exits.  E.g., lingering `logit` processes when parent dies
-  Petrus Hellgren, Westermo
+* Fix service name matching, e.g. for condition handling, may match with
  wrong service, by Jonas Holmberg, Westermo
 * Run all run-parts scripts using `/bin/sh -c foo` just like the standard
  run-parts tool.  Found by Magnus Malm, Westermo
 * Fix `initctl [start | restart]`, should behave the same for services
  that have crashed.  Found by Mattias Walström, Westermo
 * Wait for bootstrap phase to complete before cleaning out any bootstrap
@@ -69,7 +130,13 @@ Bug fix release.
 * Reassert condition when an unmodified run/task/service goes from
  WAITING back to RUNNING again after a reconfiguration event.  
  Found and fixed by Jonas Johansson, Westermo
 * Restore Ctrl-D and Ctrl-U support in built-in getty
 * Remove service condition when service is deleted
 * Fix C++ compilation issues, by Robert Andersson, Atlas Copco
 * Build fixes for uClibc
 * Provide service description for built-in watchdog daemon
 * Fix #138: Handle `SIGPWR` like `SIGSUR2`, i.e., power off the system
 * Drop the '%m' GNUism, for compat with older musl libc
 [3.1][] - 2018-01-23
@@ -144,7 +211,7 @@ This version requires at least libuEv v2.1.0 and libite v2.0.1
  possibility of running a second stage mount command before files in
  `/run` and similar are created
 * Skip `gdbserver` when unleashing the grim reaper at shutdown
-* Distribute and install `docs/` and `contrib/` directories
+* Distribute and install `doc/` and `contrib/` directories
 ### Fixes
@@ -207,7 +274,7 @@ distributions.
 * Ensure plugins always have a default name, file name
 * Reorganization, move all source files to a `src/` sub-directory
 * Add support for `initctl <list|enable|disable> <SVC>`, much needed by
-  distributions.  See [docs/distro.md](docs/distro.md) for details
+  distributions.  See [doc/distro.md](doc/distro.md) for details
 * Remove `UNUSED()` macro, mentioned here because it may have been used
  by external plugin developers.  Set `-Wno-unused-parameter` instead
 * New table headings in `initctl`, using `top` style inverted text
@@ -778,7 +845,7 @@ Major bug fix release.
 * Initial release
 [UNRELEASED]: https://github.com/troglobit/finit/compare/3.1...HEAD
-[3.2]: https://github.com/troglobit/finit/compare/3.1...3.2
+[4.0]: https://github.com/troglobit/finit/compare/3.1...4.0
 [3.1]: https://github.com/troglobit/finit/compare/3.0...3.1
 [3.0]: https://github.com/troglobit/finit/compare/2.4...3.0
 [2.4]: https://github.com/troglobit/finit/compare/2.3...2.4
@@ -1,5 +1,5 @@
 Copyright (c) 2008-2010  Claudio Matsuoka <cmatsuoka@gmail.com>
-Copyright (c) 2008-2014  Joachim Nilsson <troglobit@gmail.com>
+Copyright (c) 2008-2021  Joachim Wiberg <troglobit@gmail.com>
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal
@@ -1,13 +1,13 @@
 ACLOCAL_AMFLAGS    = -I m4
-SUBDIRS            = plugins src
+SUBDIRS            = plugins src test
 doc_DATA           = README.md LICENSE contrib/finit.conf
 EXTRA_DIST         = README.md LICENSE ChangeLog.md contrib/finit.conf
 if CONTRIB
 SUBDIRS           += contrib
 endif
-if DOCS
+if DOC
-SUBDIRS           += docs
+SUBDIRS           += doc
 endif
 # Compat hook
@@ -16,8 +16,9 @@ install-dev:
 # Target to run when building a release
 release: distcheck
-	@for file in $(DIST_ARCHIVES); do	\
+	@for file in $(DIST_ARCHIVES); do		\
-		md5sum $$file > ../$$file.md5;	\
+		md5sum $$file > ../$$file.md5;		\
 		sha256sum $$file > ../$$file.sha256;	\
 	done
 	@mv $(DIST_ARCHIVES) ../
 	@echo
@@ -25,5 +26,22 @@ release: distcheck
 	@echo "================================================================="
 	@for file in $(DIST_ARCHIVES); do					\
 		printf "$$file    \tDistribution tarball\n";			\
-		printf "$$file.md5\t"; cat ../$$file.md5 | cut -f1 -d' ';	\
+		printf "$$file.md5\t";    cat ../$$file.md5    | cut -f1 -d' ';	\
 		printf "$$file.sha256\t"; cat ../$$file.sha256 | cut -f1 -d' ';	\
 	done
 run:
 	srcdir=@srcdir@/test \
 	top_builddir=@top_builddir@ \
 	TENV_ROOT=$(tenv_root) \
 		@srcdir@/test/setup-root.sh
 	mkdir -p $(dir $(tenv_root)/@FINIT_CONF@)
 	echo 'tty [12345] @console linux noclear nologin' > $(tenv_root)/@FINIT_CONF@
 	-TENV_ROOT=$(tenv_root) \
 	 TESTENV_PATH=@sbindir@:/bin \
 	 FINIT_RCSD=@FINIT_RCSD@ \
 		test/tenv/start.sh finit
 run : tenv_root ?= @abs_top_builddir@/run-rootfs
@@ -1,41 +1,40 @@
-<img align="right" src="images/finit3.png" alt="Finit: Fast Init">
+[![License Badge][]][License] [![Travis Status]][Travis] [![Coverity Status]][Coverity Scan]
 <img align="right" src="img/finit3.png" alt="Finit: Fast Init">
 * [Introduction](#introduction)
 * [Features](#features)
-* [Bootstrap](docs/bootstrap.md#bootstrap)
+* [Bootstrap](doc/bootstrap.md#bootstrap)
 * [Runlevels](#runlevels)
-* [Syntax](docs/config.md#syntax)
+* [Syntax](doc/config.md#syntax)
  * [Inetd](docs/inetd.md#inetd)
  * [Runparts & /etc/rc.local](#runparts--etcrclocal)
-  * [Hooks, Callbacks & Plugins](docs/plugins.md#hooks-callbacks--plugins)
+  * [Hooks, Callbacks & Plugins](doc/plugins.md#hooks-callbacks--plugins)
 * [Rebooting & Halting](#rebooting--halting)
 * [Commands & Status](#commands--status)
-* [Tips & Tricks with the kernel cmdline](docs/cmdline.md)
+* [Tips & Tricks with the kernel cmdline](doc/cmdline.md)
-* [Building](docs/build.md#building)
+* [Building](doc/build.md#building)
-  * [Running](docs/build.md#running)
+  * [Running](doc/build.md#running)
-  * [Recovery](docs/build.md#recovery)
+  * [Recovery](doc/build.md#recovery)
-  * [Debugging](docs/build.md#debugging)
+  * [Debugging](doc/build.md#debugging)
 * [Requirements](#requirements)
 * [Origin & References](#origin--references)
 Introduction
 ------------
 [![License Badge][]][License] [![Travis Status]][Travis] [![Coverity Status]][Coverity Scan]
 Finit is a simple alternative to [SysV init][4] and [systemd][6].  It
-was reverse engineered from the [EeePC fastinit][] ten years ago by
+was reverse engineered from the [EeePC fastinit][] over ten years ago
-[Claudio Matsuoka][] — "gaps filled with frog DNA …"
+by [Claudio Matsuoka][] — "gaps filled with frog DNA …"
 Focus is on small and embedded systems, although Finit is fully usable
 on server and desktop systems as well.  For working examples, see the
 [contrib/](contrib/) section with tutorials for:
-* [Alpine Linux](contrib/alpine/),
+  * [Void Linux](contrib/void/),
-* [Debian GNU/Linux](contrib/debian/), and
+  * [Alpine Linux](contrib/alpine/), and
-* [Void Linux](contrib/void/)
+  * [Debian GNU/Linux](contrib/debian/)
-![Alpine screenshot](images/alpine-screenshot.png)  
+![Alpine screenshot](img/alpine-screenshot.png)  
 The screenshot shows [Alpine Linux](https://www.alpinelinux.org/).
@@ -59,89 +58,79 @@ runlevel 2
 log size=100k count=4
 # Services to be monitored and respawned as needed
-service [S12345] /sbin/watchdogd -L -f                       -- System watchdog daemon
+service [S12345] watchdogd -L -f                 -- System watchdog daemon
-service [S12345] /sbin/syslogd -n -b 3 -D                    -- System log daemon
+service [S12345] syslogd -n -b 3 -D              -- System log daemon
-service [S12345] /sbin/klogd -n                              -- Kernel log daemon
+service [S12345] <pid/syslogd> klogd -n          -- Kernel log daemon
-service   [2345] /sbin/lldpd -d -c -M1 -H0 -i                -- LLDP daemon (IEEE 802.1ab)
+service   [2345] lldpd -d -c -M1 -H0 -i          -- LLDP daemon (IEEE 802.1ab)
 # The BusyBox ntpd does not use syslog when running in the foreground
 # So we use this trick to redirect stdout/stderr to a log file.  The
 # log file is rotated with the above settings.  The condition declares
 # a dependency on a system default route (gateway) to be set.  A single
 # <!> at the beginning means ntpd does not respect SIGHUP for restart.
-service [2345] log:/var/log/ntpd.log <!net/route/default> /sbin/ntpd -n -l -I eth0 -- NTP daemon
+service [2345] log:/var/log/ntpd.log <!net/route/default> ntpd -n -l -I eth0 -- NTP daemon
 # For multiple instances of the same service, add :ID somewhere between
 # the service/run/task keyword and the command.
-service :1 [2345] /sbin/merecat -n -p 80   /var/www          -- Web server
+service :80   [2345] merecat -n -p 80   /var/www -- Web server
-service :2 [2345] /sbin/merecat -n -p 8080 /var/www          -- Old web server
+service :8080 [2345] merecat -n -p 8080 /var/www -- Old web server
 # Alternative method instead of below runparts, can also use /etc/rc.local
-#task [S] /etc/init.d/keyboard-setup start                   -- Setting up preliminary keymap
+#task [S] /etc/init.d/keyboard-setup start       -- Setting up preliminary keymap
-#task [S] /etc/init.d/acpid start                            -- Starting ACPI Daemon
+#task [S] /etc/init.d/acpid start                -- Starting ACPI Daemon
-#task [S] /etc/init.d/kbd start                              -- Preparing console
+#task [S] /etc/init.d/kbd start                  -- Preparing console
 # Inetd services to start on demand, with alternate ports and filtering
 inetd ftp/tcp          nowait [2345] /sbin/in.ftpd           -- FTP daemon
 inetd tftp/udp           wait [2345] /sbin/in.tftpd          -- TFTP daemon
 inetd time/udp           wait [2345] internal                -- UNIX rdate service
 inetd time/tcp         nowait [2345] internal                -- UNIX rdate service
 inetd 3737/tcp         nowait [2345] internal.time           -- UNIX rdate service
 inetd telnet/tcp       nowait [2345] /sbin/telnetd -i -F     -- Telnet daemon
 inetd 2323/tcp         nowait [2345] /sbin/telnetd -i -F     -- Telnet daemon
 inetd 222/tcp@eth0     nowait [2345] /sbin/dropbear -i -R -F -- SSH service
 inetd ssh/tcp@*,!eth0  nowait [2345] /sbin/dropbear -i -R -F -- SSH service
 # Run start scripts from this directory
 # runparts /etc/start.d
-# Virtual consoles run BusyBox getty
+# Virtual consoles run BusyBox getty, keep kernel default speed
-tty [12345] /sbin/getty -L 115200 /dev/tty1 linux
+tty [12345] /sbin/getty -L 0 /dev/tty1 linux
-tty [12345] /sbin/getty -L 115200 /dev/tty2 linux
+tty [12345] /sbin/getty -L 0 /dev/tty2 linux
-tty [12345] /sbin/getty -L 115200 /dev/tty3 linux
+tty [12345] /sbin/getty -L 0 /dev/tty3 linux
 # Use built-in getty for serial port and USB serial
-tty [12345] /dev/ttyAMA0 115200 noclear nowait
+tty [12345] /dev/ttyAMA0 noclear nowait
-tty [12345] /dev/ttyUSB0 115200 noclear
+tty [12345] /dev/ttyUSB0 noclear
 # Just give me a shell, I need to debug this embedded system!
 tty [12345] @console noclear nologin
 ```
-The `service` stanza, as well as `task`, `run`, `inetd` and others are
+The `service` stanza, as well as `task`, `run` and others are described
-described in full in [docs/config.md](docs/config.md).  Here's a quick
+in full in [doc/config.md](doc/config.md).  Here's a quick overview of
-overview of some of the most common components needed to start a UNIX
+some of the most common components needed to start a UNIX daemon:
 daemon:
 ```
-service [LVLS] <COND> /path/to/daemon ARGS -- Some text
+service [LVLS] <COND> log env:[-]/etc/default/daemon daemon ARGS -- Daemon daemon
-^       ^      ^      ^               ^       ^
+^       ^      ^      ^   ^                          ^              ^       ^
-|       |      |      |               |        `-- Optional description
+|       |      |      |   |                          |              |        `-- Optional description
-|       |      |      |                `---------- Daemon arguments
+|       |      |      |   |                          |              `----------- Daemon arguments
-|       |      |       `-------------------------- Path to daemon
+|       |      |      |   |                          `-------------------------- Path to daemon
-|       |       `--------------------------------- Optional conditions
+|       |      |      |    `---------------------------------------------------- Optional env. file
-|        `---------------------------------------- Optional Runlevels
+|       |      |       `-------------------------------------------------------- Redirect output to log
- `------------------------------------------------ Monitored application
+|       |       `--------------------------------------------------------------- Optional conditions
 |        `---------------------------------------------------------------------- Optional Runlevels
 `------------------------------------------------------------------------------ Monitored application
 ```
 Some components are optional: runlevel(s), condition(s) and description,
 making it easy to create simple start scripts and still possible for more
 advanced uses as well:
-    service /usr/sbin/sshd -D
+    service sshd -D
-Dependencies are handled using [conditions](docs/conditions.md).  One of
+Dependencies are handled using [conditions](doc/conditions.md).  One of
 the most common conditions is to wait for basic networking to become
 available:
-    service <net/route/default> /usr/sbin/nginx -- High performace HTTP server
+    service <net/route/default> nginx -- High performace HTTP server
 Here is another example where we instruct Finit to not start BusyBox
 `ntpd` until `syslogd` has started properly.  Finit waits for `syslogd`
 to create its PID file, by default `/var/run/syslogd.pid`.
-    service [2345] log <svc/sbin/syslogd> /usr/sbin/ntpd -n -N -p pool.ntp.org
+    service [2345] log <!pid/syslogd> ntpd -n -N -p pool.ntp.org
-    service [S12345] /sbin/syslogd -n -- Syslog daemon
+    service [S12345] syslogd -n -- Syslog daemon
 Notice the `log` keyword, BusyBox `ntpd` uses `stderr` for logging when
 run in the foreground.  With `log` Finit redirects `stdout` + `stderr`
@@ -150,7 +139,7 @@ to the system log daemon using the command line `logger(1)` tool.
 A service, or task, can have multiple dependencies listed.  Here we wait
 for *both* `syslogd` to have started and basic networking to be up:
-    service [2345] log <svc/sbin/syslogd,net/route/default> /usr/sbin/ntpd -n -N -p pool.ntp.org
+    service [2345] log <pid/syslogd,net/route/default> ntpd -n -N -p pool.ntp.org
 If either condition fails, e.g. loss of networking, `ntpd` is stopped
 and as soon as it comes back up again `ntpd` is restarted automatically.
@@ -169,26 +158,6 @@ Features
 Start, monitor and restart services should they fail.
 **Inetd**
 Finit comes with a built-in [inetd server](docs/inetd.md).  No need to
 maintain a separate config file for services that you want to start on
 demand.
 All inetd services started can be filtered per port and inbound
 interface, reducing the need for a full blown firewall.
 Built-in optional inetd services:
 - echo [RFC862][]
 - chargen [RFC864][]
 - daytime [RFC867][]
 - discard [RFC863][]
 - time (rdate) [RFC868][]
 For more information, see [docs/inetd.md](docs/inetd.md).
 **Getty**
 Finit supports external getty but also comes with a limited built-in
@@ -197,9 +166,9 @@ waits for user input before handing over to `/bin/login`, which is
 responsible for handling the actual authentication.
 ```conf
-tty [12345] /dev/tty1    38400  nowait  linux
+tty [12345] /dev/tty1    nowait  linux
-tty [12345] /dev/ttyAMA0 115200 noclear vt100
+tty [12345] /dev/ttyAMA0 noclear vt100
-tty [12345] /sbin/getty  -L 115200 /dev/ttyAMA0 vt100
+tty [12345] /sbin/getty  -L /dev/ttyAMA0 vt100
 ```
 Users of embedded systems may want to enable automatic serial console
@@ -208,19 +177,19 @@ system uses `ttyS0`, `ttyAMA0`, `ttyMXC0`, or anything else.  Finit
 figures it out by querying sysfs: `/sys/class/tty/console/active`.
 ```conf
-tty [12345] @console 115200 linux noclear
+tty [12345] @console linux noclear
 ```
 Notice the optional `noclear`, `nowait`, and `nologin` flags.  The
 latter is for skipping the login process entirely. For more information,
-see [docs/config.md](docs/config.md#syntax).
+see [doc/config.md](doc/config.md#syntax).
 **Runlevels**
 Support for SysV init-style [runlevels][5] is available, in the same
 minimal style as everything else in Finit.  The `[2345]` syntax can be
-applied to service, task, run, inetd, and TTY stanzas.
+applied to service, task, run, and TTY stanzas.
 Reserved runlevels are 0 and 6, halt and reboot, respectively just like
 SysV init.  Runlevel 1 can be configured freely, but is recommended to
@@ -250,34 +219,26 @@ Capabilities:
  Hook into the boot at predefined points to extend Finit
 - **I/O**  
  Listen to external events and control Finit behavior/services
 - **Inetd**  
  Extend Finit with internal inetd services, for an example, see
  `plugins/time.c`
 Extensions and functionality not purely related to what an `/sbin/init`
 needs to start a system are available as a set of plugins that either
 hook into the boot process or respond to various I/O.
-For more information, see [docs/plugins.md](docs/plugins.md).
+For more information, see [doc/plugins.md](doc/plugins.md).
-**Progress**
+**Automatic Reload**
-Finit prior to v3.0 showed the progress at boot: plugins and modules
+By default, Finit monitors `/etc/finit.d/` and `/etc/finit.d/enabled/`
-being loaded, run/tasks/services being started, etc.  By default Finit
+registering any changes to `.conf` files.  To activate a change the user
-is now silent, but progress can still be enabled at build-time using:
+must call `initctl reload`, which reloads all modified files, stops any
 removed services, starts new ones, and restarts any modified ones, with
 SIGHUP if the process supports it.
-    configure --enable-progress
+For some use-cases the extra step of calling `initctl reload` creates an
 unnecessary overhead, which can be removed at build-time using:
-or at boot from the kernel cmdline using the boot parameter `splash`:
+    configure --enable-auto-reload
 ```shell
 append="init=/sbin/finit splash"
 ```
 For a really nice boot, add `quiet` as well.  This silences the output
 from the kernel, leaving only warnings and errors.  For other kernel
 command line parameters, see [docs/build.md](docs/build.md#recovery).
 Runparts & /etc/rc.local
@@ -299,8 +260,8 @@ Right after the runlevel change when all services have started properly,
 No configuration stanza in `/etc/finit.conf` is required for `rc.local`.
 If it exists and is an executable shell script Finit calls it at the very
 end of the boot, before calling the `HOOK_SYSTEM_UP`.  See more on hooks
-in [docs/plugins.md](docs/plugins.md#hooks), and about the system bootstrap
+in [doc/plugins.md](doc/plugins.md#hooks), and about the system bootstrap
-in [docs/bootstrap.md](docs/bootstrap.md).
+in [doc/bootstrap.md](doc/bootstrap.md).
 Runlevels
@@ -321,10 +282,10 @@ To specify an allowed set of runlevels for a `service`, `run` command,
 `task`, or `tty`, add `[NNN]` to your `/etc/finit.conf`, like this:
 ```
-service [S12345] /sbin/syslogd -n -x     -- System log daemon
+service [S12345] syslogd -n -x             -- System log daemon
-run     [S]      /etc/init.d/acpid start -- Starting ACPI Daemon
+run     [S]      /etc/init.d/acpid start   -- Starting ACPI Daemon
-task    [S]      /etc/init.d/kbd start   -- Preparing console
+task    [S]      /etc/init.d/kbd start     -- Preparing console
-service [S12345] /sbin/klogd -n -x       -- Kernel log daemon
+service [S12345] <pid/syslogd> klogd -n -x -- Kernel log daemon
 tty     [12345]  /dev/tty1
 tty     [2]      /dev/tty2
@@ -371,42 +332,19 @@ Rebooting & Halting
 Traditionally, rebooting and halting a UNIX system is done by changing
 its runlevel.  Finit comes with its own tooling providing: `shutdown`,
-`reboot`, `poweroff`, and `suspend`, but also the traditional `init` and
+`reboot`, `poweroff`, and `suspend`, but also the `initctl` tool,
-`telinit`, as well as a more modern `initctl` tool, detailed in the next
+detailed in the next section.
 section.
 For compatibility reasons Finit listens to the same set of signals as
 BusyBox init.  This is not 100% compatible with SysV init, but clearly
 the more common combination for Finit.  For more details, see
-[docs/signals.md](docs/signals.md).
+[doc/signals.md](doc/signals.md).
 Finit also listens to the classic SysV init FIFO, used by `telinit`.
 Support for this is implemented by the `initctl.so` plugin.  Hence,
 `telinit q` will work as the UNIX beards intended.
 ```shell
 ~ # telinit -h
 Usage: telinit [OPTIONS] [q | Q | 0-9]
 Options:
  -h, --help      This help text
  -V, --version   Show Finit version
 Commands:
  0               Power-off the system, same as initctl poweroff
  6               Reboot the system, same as initctl reboot
  2, 3, 4, 5      Change runlevel. Starts services in new runlevel, stops any
                  services in prev. runlevel that are not allowed in new.
  q, Q            Reload *.conf in /etc/finit.d/, same as initctl reload or
                  sending SIGHUP to PID 1
  1, s, S         Enter system rescue mode, runlevel 1
 ```
 Commands & Status
 -----------------
-Finit also implements a more modern API to query status, and start/stop
+Finit also implements a modern API to query status, and start/stop
 services, called `initctl`.  Unlike `telinit` the `initctl` tool does
 not return until the given command has fully completed.
@@ -429,8 +367,6 @@ Commands:
  touch    <CONF>           Mark     .conf in /etc/finit.d/ for reload
  reload                    Reload  *.conf in /etc/finit.d/ (activates changes)
  cond     set   <COND>     Set (assert) condition     => +COND
  cond     clear <COND>     Clear (deassert) condition => -COND
  cond     show             Show condition status
  cond     dump             Dump all conditions and their status
@@ -451,7 +387,7 @@ Commands:
 For services *not* supporting `SIGHUP` the `<!>` notation in the .conf
 file must be used to tell Finit to stop and start it on `reload` and
-`runlevel` changes.  If `<>` holds more [conditions](docs/conditions.md),
+`runlevel` changes.  If `<>` holds more [conditions](doc/conditions.md),
 these will also affect how a service is maintained.
 **Note:** even though it is possible to start services not belonging in
@@ -490,7 +426,7 @@ done slightly differently and on systems with udev you might want to add
 the following one-shot task early in your `/etc/finit.conf`:
 ```conf
-run [S] /sbin/udevadm settle --timeout=120 -- Waiting for udev
+run [S] udevadm settle --timeout=120 -- Waiting for udev
 ```
 Finit has a built-in Getty for TTYs, but requires a working `/bin/login`
@@ -499,9 +435,6 @@ or `/bin/sh`, if no TTYs are configured in `/etc/finit.conf`.
 For a fully operational system `/var`, `/run` and `/tmp` must be set up
 properly in `/etc/fstab` -- which is iterated over at boot.
 The built-in Inetd requires `/etc/services` and `/etc/protocols` to work
 with port names rather than numbers.
 Origin & References
 -------------------
@@ -510,7 +443,7 @@ This project is based on the [original finit][] by [Claudio Matsuoka][]
 which was reverse engineered from syscalls of the [EeePC fastinit][] —
 "gaps filled with frog DNA …"
-Finit is developed and maintained by [Joachim Nilsson][] at [GitHub][].
+Finit is developed and maintained by [Joachim Wiberg][] at [GitHub][].
 Please file bug reports, clone it, or send pull requests for bug fixes
 and proposed extensions.
@@ -533,12 +466,12 @@ and proposed extensions.
 [openrc]:           http://www.gentoo.org/proj/en/base/openrc/
 [run-parts(8)]:     http://manpages.debian.org/cgi-bin/man.cgi?query=run-parts
 [original finit]:   http://helllabs.org/finit/
-[EeePC fastinit]:   http://wiki.eeeuser.com/boot_process:the_boot_process
+[EeePC fastinit]:   https://web.archive.org/web/20071208212450/http://wiki.eeeuser.com/boot_process:the_boot_process
 [Claudio Matsuoka]: https://github.com/cmatsuoka
-[Joachim Nilsson]:  http://troglobit.com
+[Joachim Wiberg]:   http://troglobit.com
 [GitHub]:           https://github.com/troglobit/finit
 [License]:          https://en.wikipedia.org/wiki/MIT_License
-[License Badge]:    https://img.shields.io/badge/License-MIT-yellow.svg
+[License Badge]:    https://img.shields.io/badge/License-MIT-teal.svg
 [Travis]:           https://travis-ci.org/troglobit/finit
 [Travis Status]:    https://travis-ci.org/troglobit/finit.png?branch=master
 [Coverity Scan]:    https://scan.coverity.com/projects/3545
@@ -1,5 +1,6 @@
-AC_INIT(Finit, 3.2-rc1, https://github.com/troglobit/finit/issues, finit, http://troglobit.com/finit.html)
+AC_INIT(Finit, 4.0-rc1, https://github.com/troglobit/finit/issues, finit, https://troglobit.com/finit.html)
-AM_INIT_AUTOMAKE([1.11 foreign no-dist-gzip dist-xz subdir-objects])
+AC_CONFIG_AUX_DIR(aux)
 AM_INIT_AUTOMAKE([1.11 foreign dist-xz subdir-objects])
 AM_SILENT_RULES([yes])
 AC_CONFIG_SRCDIR([src/finit.c])
@@ -9,18 +10,17 @@ AC_CONFIG_FILES([Makefile
 	contrib/alpine/Makefile contrib/alpine/finit.d/Makefile contrib/alpine/finit.d/available/Makefile
 	contrib/debian/Makefile contrib/debian/finit.d/Makefile contrib/debian/finit.d/available/Makefile contrib/debian/grub.d/Makefile
 	contrib/void/Makefile   contrib/void/finit.d/Makefile   contrib/void/finit.d/available/Makefile
-	docs/Makefile
+	doc/Makefile
 	plugins/Makefile
-	src/Makefile])
+	src/Makefile
 	test/test.env
 	test/Makefile])
 # Older versions of autoconf (<2.58) do not have AC_CONFIG_MACRO_DIR()
 #m4_include([m4/plugin.m4])
 #m4_include([m4/expand.m4])
 AC_CONFIG_MACRO_DIR([m4])
 # Change default prefix, we're PID 1 after all ...
 AC_PREFIX_DEFAULT([])
 # Handle building plugins either as dynamically loadable, or built-in
 LT_INIT([shared disable-static dlopen aix-soname=both disable-fast-install])
@@ -40,9 +40,12 @@ AC_TYPE_UINT8_T
 AC_TYPE_UINT16_T
 AC_TYPE_UINT32_T
 # Check for pkg-config first, warn if it's not installed
 PKG_PROG_PKG_CONFIG
 # Check for required libraries
 PKG_CHECK_MODULES([uev],  [libuev >= 2.2.0])
-PKG_CHECK_MODULES([lite], [libite >= 2.0.1])
+PKG_CHECK_MODULES([lite], [libite >= 2.2.0])
 # Check for configured Finit features
 AC_ARG_ENABLE(emergency_shell,
@@ -54,13 +57,9 @@ AC_ARG_ENABLE(fallback_shell,
        AS_HELP_STRING([--enable-fallback-shell], [Start a shell if no TTYs can start]),,[
 	enable_fallback_shell=no])
-AC_ARG_ENABLE(rw-rootfs,
+AC_ARG_ENABLE(auto_reload,
-        AS_HELP_STRING([--enable-rw-rootfs], [Remount / R/W at boot, usually not for embedded]),,[
+        AS_HELP_STRING([--enable-auto-reload], [Automatic reload on any .conf change]),,[
-	enable_rw_rootfs=no])
+	enable_auto_reload=no])
 AC_ARG_ENABLE(progress,
        AS_HELP_STRING([--enable-progress], [Pre Finit v3 bootup progress and heading]),,[
 	enable_progress=no])
 AC_ARG_ENABLE(watchdog,
        AS_HELP_STRING([--enable-watchdog], [Enable built-in watchdog, uses /dev/watchdog]),,[
@@ -70,17 +69,17 @@ AC_ARG_ENABLE(redirect,
        AS_HELP_STRING([--enable-redirect], [Redirect service output to /dev/null, default: no]),,[
 	enable_redirect_output=no])
-AC_ARG_ENABLE(inetd,
+AC_ARG_ENABLE(logit,
-        AS_HELP_STRING([--disable-inetd], [Disable built-in inetd super server, default enabled]),,[
+     AS_HELP_STRING([--disable-logit], [Disable logit, used for log redirection, default: enable]),,[
-	enable_inetd=yes])
+     enable_logit=yes])
 AC_ARG_ENABLE(logrotate,
        AS_HELP_STRING([--disable-logrotate], [Disable built-in rotation of /var/log/wtmp, default enabled]),,[
 	enable_logrotate=yes])
-AC_ARG_ENABLE(docs,
+AC_ARG_ENABLE(doc,
-        AS_HELP_STRING([--disable-docs], [Disable build and install of docs section]),,[
+        AS_HELP_STRING([--disable-doc], [Disable build and install of doc/ section]),,[
-	enable_docs=yes])
+	enable_doc=yes])
 AC_ARG_ENABLE(contrib,
        AS_HELP_STRING([--disable-contrib], [Disable build and install of contrib section]),,[
@@ -90,52 +89,44 @@ AC_ARG_ENABLE(contrib,
 enable_all_plugins=auto
 AC_PLUGIN([alsa-utils],    [no],  [Save and restore ALSA sound settings using alsactl])
 AC_PLUGIN([dbus],          [no],  [Setup and start system message bus, D-Bus])
-AC_PLUGIN([inetd-echo],    [no],  [Inetd plugin: echo server, RFC862])
+AC_PLUGIN([modules-load],  [no],  [Scans /etc/modules-load.d for modules to load])
 AC_PLUGIN([inetd-chargen], [no],  [Inetd plugin: character generator, RFC864])
 AC_PLUGIN([inetd-daytime], [no],  [Inetd plugin: daytime server, RFC867])
 AC_PLUGIN([inetd-discard], [no],  [Inetd plugin: discard server, RFC863])
 AC_PLUGIN([inetd-time],    [no],  [Inetd plugin: time (rdate) server, RFC868])
 AC_PLUGIN([resolvconf],    [no],  [Setup necessary files for resolvconf])
 AC_PLUGIN([x11-common],    [no],  [Console setup (for X)])
 AC_PLUGIN([netlink],       [yes], [Basic netlink plugin for IFUP/IFDN and GW events. Can be replaced with externally built plugin that links with libnl or similar.])
 AC_PLUGIN([hotplug],       [yes], [Setup and start udev or mdev hotplug daemon])
 # Check for extra arguments or packages
 AC_ARG_WITH(heading,
        AS_HELP_STRING([--with-heading=GREET], [Display GREET instead of Finit version at boot]),
-	[heading=$withval], [heading="$PACKAGE_NAME v$PACKAGE_VERSION"])
+	[heading=$withval], [heading=yes])
 AC_ARG_WITH(fifo,
        AS_HELP_STRING([--with-fifo=FIFO], [FIFO for init/telinit clients, default /var/run/initctl]),
 	[fifo=$withval], [fifo=$localstatedir/run/initctl])
 AC_ARG_WITH(config,
        AS_HELP_STRING([--with-config=CONFIG], [Finit bootstrap config file, default /etc/finit.conf]),
-	[conf=$withval], [conf=$sysconfdir/finit.conf])
+	[conf=$withval], [conf=yes])
 AC_ARG_WITH(rcsd,
        AS_HELP_STRING([--with-rcsd=DIR], [Finit rcS.d/ directory, default /etc/finit.d]),
-	[rcsd=$withval], [rcsd=$sysconfdir/finit.d])
+	[rcsd=$withval], [rcsd=yes])
 AC_ARG_WITH(rc-local,
        AS_HELP_STRING([--with-rc-local=FILE], [SysV init /etc/rc.local file, default /etc/rc.local]),
-	[rclocal=$withval], [rclocal=$sysconfdir/rc.local])
+	[rclocal=$withval], [rclocal=yes])
-AC_ARG_WITH(console,
+AC_ARG_WITH(sysconfig,
-        AS_HELP_STRING([--with-console=DEV], [Console to use, default: /dev/console]),
+        AS_HELP_STRING([--with-sysconfig=DIR], [System environment directory, sourced by .conf files, default /etc/default & /etc/conf.d]),
-	[console=$withval], [console=/dev/console])
+	[sysconfig=$withval], [sysconfig=default])
 AC_ARG_WITH(hostname,
        AS_HELP_STRING([--with-hostname=NAME], [If /etc/hostname is missing, default: noname]),
-	[hostname=$withval], [hostname=noname])
+	[hostname=$withval], [hostname=yes])
 AC_ARG_WITH(runlevel,
        AS_HELP_STRING([--with-runlevel=N], [Runlevel to switch to after bootstrap, default: 2]),
-	[runlevel=$withval], [runlevel=2])
+	[runlevel=$withval], [runlevel=yes])
 AC_ARG_WITH(random-seed,
        AS_HELP_STRING([--with-random-seed=FILE], [Save a random seed for /dev/urandom across reboots, default /var/lib/misc/random-seed]),
-	[random_seed=$withval], [random_seed=/var/lib/misc/random-seed])
+	[random_seed=$withval], [random_seed=yes])
 ### Enable features ###########################################################################
@@ -146,13 +137,8 @@ AS_IF([test "x$enable_emergency_shell" = "xyes"], [
 AS_IF([test "x$enable_fallback_shell" = "xyes"], [
        AC_DEFINE(FALLBACK_SHELL,  1, [Start /bin/sh on console if no TTYs.])])
-AS_IF([test "x$enable_rw_rootfs" = "xyes"], [
+AS_IF([test "x$enable_auto_reload" = "xyes"], [
-        AC_DEFINE(REMOUNT_ROOTFS,  1, [Remount / as rw at boot])])
+        AC_DEFINE(AUTO_RELOAD, 1, [Finit automatically does `initctl reload` on any .conf change])])
 AS_IF([test "x$enable_progress" = "xyes"], [
        AC_DEFINE(SILENT_MODE,  0, [Pre Finit v3 bootup messages and heading])
 	], [
 	AC_DEFINE(SILENT_MODE,  1, [Completely silent until login prompt])])
 AS_IF([test "x$enable_watchdog" = "xyes"], [
        AC_DEFINE(BUILTIN_WATCHDOG,  1, [Enable built-in watchdog, kicks on /dev/watchdog])])
@@ -161,31 +147,26 @@ AS_IF([test "x$enable_redirect" = "xyes"], [
 	AC_DEFINE(REDIRECT_OUTPUT, 1, [Enable redirection of service output to /dev/null])])
 ### Disable features ###########################################################################
-AS_IF([test "x$enable_inetd" != "xno"], [
+AS_IF([test "x$enable_logit" != "xno"], [
-	enable_inetd="yes"
+	AC_DEFINE(LOGIT_ENABLED,  1, [Enable logit tool, used for log redirection by Finit])])
 	AC_DEFINE(INETD_ENABLED,  1, [Enable built-in inetd])])
 AS_IF([test "x$enable_logrotate" != "xno"], [
 	AC_DEFINE(LOGROTATE_ENABLED, 1, [Enable built-in rotation of /var/log/wtmp et al.])])
 ### With features ##############################################################################
 AS_IF([test "x$with_fifo" != "xno"], [
 	AS_IF([test "x$fifo" = "xyes"], [
 		    fifo='$localstatedir/run/initctl'])])
 AC_EXPAND_DIR(fifo_path, "$fifo")
 AC_DEFINE_UNQUOTED(FINIT_FIFO, "$fifo_path", [FIFO for old style init/telinit client programs])
 AS_IF([test "x$with_config" != "xno"], [
-	AS_IF([test "x$config" = "xyes"], [
+	AS_IF([test "x$conf" = "xyes"], [
 		conf=$sysconfdir/finit.conf])])
 AC_EXPAND_DIR(conf_path, "$conf")
 AC_DEFINE_UNQUOTED(FINIT_CONF, "$conf_path", [Main Finit configuration file, default /etc/finit.conf])
 AC_SUBST(FINIT_CONF, "$conf_path")
 AS_IF([test "x$with_rcsd" != "xno"], [
 	AS_IF([test "x$rcsd" = "xyes"], [
 		rcsd=$sysconfdir/finit.d])])
 AC_EXPAND_DIR(rcsd_path, "$rcsd")
 AC_DEFINE_UNQUOTED(FINIT_RCSD, "$rcsd_path", [Finit rcS.d/, default /etc/finit.d])
 AC_SUBST(FINIT_RCSD, "$rcsd_path")
 AS_IF([test "x$with_rc_local" != "xno"], [
 	AS_IF([test "x$rclocal" = "xyes"], [
@@ -193,16 +174,17 @@ AS_IF([test "x$with_rc_local" != "xno"], [
 AC_EXPAND_DIR(rclocal_path, "$rclocal")
 AC_DEFINE_UNQUOTED(FINIT_RC_LOCAL, "$rclocal_path", [Compat SysV /etc/rc.local file to run last at boot.])
 AS_IF([test "x$with_sysconfig" != "xno"], [
 	AS_IF([test "x$sysconfig" != "xdefault"], [
 		    AC_EXPAND_DIR(sysconfig_path, "$sysconfig")
 		    AC_DEFINE_UNQUOTED(FINIT_SYSCONFIG, "$sysconfig_path",
 			    [System environment, default /etc/default & /etc/conf.d])])])
 AS_IF([test "x$with_heading" != "xno"], [
 	AS_IF([test "x$heading" = "xyes"], [
 		heading="$PACKAGE_NAME v$PACKAGE_VERSION"])])
 AC_DEFINE_UNQUOTED(INIT_HEADING, "$heading", [Displayed by Finit at boot])
 AS_IF([test "x$with_console" != "xno"], [
 	AS_IF([test "x$console" = "xyes"], [
 		console=/dev/console])])
 AC_DEFINE_UNQUOTED(CONSOLE, "$console", [Default console to use])
 AS_IF([test "x$with_hostname" != "xno"], [
 	AS_IF([test "x$hostname" = "xyes"], [
 		hostname=noname])])
@@ -210,7 +192,8 @@ AC_DEFINE_UNQUOTED(DEFHOST, "$hostname", [For /etc/hostname])
 AS_IF([test "x$with_runlevel" != "xno"], [
 	AS_IF([test "x$runlevel" = "xyes"], [
-		AC_DEFINE_UNQUOTED(RUNLEVEL, 2, [Default runlevel to start after S])])
+		runlevel=2
 		AC_DEFINE_UNQUOTED(RUNLEVEL, $runlevel, [Default runlevel to start after S])])
 	AC_DEFINE_UNQUOTED(RUNLEVEL, $runlevel, [Runlevel to start after S])])
 AS_IF([test "x$with_random_seed" != "xno"], [
@@ -221,9 +204,9 @@ AS_IF([test "x$with_random_seed" != "xno"], [
 # Control build with automake flags
 AM_CONDITIONAL(STATIC,    [test "x$enable_static" = "xyes"])
 AM_CONDITIONAL(INETD,     [test "x$enable_inetd" = "xyes"])
 AM_CONDITIONAL(WATCHDOGD, [test "x$enable_watchdog" = "xyes"])
-AM_CONDITIONAL(DOCS,      [test "x$enable_docs" = "xyes"])
+AM_CONDITIONAL(LOGIT,     [test "x$enable_logit" = "xyes"])
 AM_CONDITIONAL(DOC,       [test "x$enable_doc" = "xyes"])
 AM_CONDITIONAL(CONTRIB,   [test "x$enable_contrib" = "xyes"])
 # Override default libdir, used for plugins and rescue.conf
@@ -238,6 +221,11 @@ AC_DEFINE_UNQUOTED(PLUGIN_PATH, "$plugin_path", [Finit plugin path])
 AC_EXPAND_DIR(rescue_conf, "$libdir/finit/rescue.conf")
 AC_DEFINE_UNQUOTED(RESCUE_CONF, "$rescue_conf", [Finit rescue mode .conf])
 AC_EXPAND_DIR(sample_conf, "$libdir/finit/sample.conf")
 AC_DEFINE_UNQUOTED(SAMPLE_CONF, "$sample_conf", [Finit sameple.conf for initctl create])
 AC_EXPAND_DIR(path_stdpath, "$sbindir:$bindir:/usr/sbin:/usr/bin:/sbin:/bin")
 AC_DEFINE_UNQUOTED(_PATH_STDPATH, "$path_stdpath", [Default PATH])
 # Generate all files
 AC_OUTPUT
@@ -247,13 +235,14 @@ cat <<EOF
 ------------------ Summary ------------------
 $PACKAGE_NAME version $PACKAGE_VERSION
  Prefix................: $prefix
  Exec prefix...........: `eval echo $exec_prefix`
  Sysconfdir............: `eval echo $sysconfdir`
  Localstatedir.........: `eval echo $localstatedir`
  FIFO path.............: $fifo_path
  Finit config file.....: $conf_path
  Finit config.d path...: $rcsd_path
  Finit plugin path.....: $plugin_path
  Compat rc.local path..: $rclocal_path
  System environment....: ${sysconfig_path:-${sysconfig}}
  Random seed path......: $random_path
  C Compiler............: $CC $CFLAGS $CPPFLAGS $LDFLAGS $LIBS
  Linker................: $LD $LLDP_LDFLAGS $LLDP_BIN_LDFLAGS $LDFLAGS $LIBS
@@ -263,16 +252,13 @@ Behavior:
  Plugins...............: $plugins
 Optional features:
-  Install docs/.........: $enable_docs
+  Install doc/..........: $enable_doc
  Install contrib/......: $enable_contrib
  Built-in inetd........: $enable_inetd
  Built-in watchdogd....: $enable_watchdog
  Built-in logrotate....: $enable_logrotate
  Scripting tool logit..: $enable_logit
  Emergency shell.......: $enable_emergency_shell
  Fallback shell........: $enable_fallback_shell
  Remount / RW at boot..: $enable_rw_rootfs
  Traditional progress..: $enable_progress
  Default console dev...: $console
  Default hostname......: $hostname
  Default runlevel......: $runlevel
@@ -14,12 +14,11 @@ fi
 # The plugins are optional, but you may need D-Bus and X11 if you want
 # to run X-Window, the other configure flags are however required.
 PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig:/usr/local/lib/pkgconfig ./configure	\
-		 --enable-rw-rootfs            --enable-progress		\
+		 --prefix=/usr			--exec-prefix=			\
-                 --enable-dbus-plugin          --enable-x11-common-plugin	\
+		 --sysconfdir=/etc		--localstatedir=/var		\
-		 --enable-alsa-utils-plugin    --enable-inetd-echo-plugin	\
+		 --enable-dbus-plugin		--enable-x11-common-plugin	\
-		 --enable-inetd-chargen-plugin --enable-inetd-daytime-plugin	\
+		 --enable-alsa-utils-plugin	--enable-watchdog		\
-		 --enable-inetd-discard-plugin --enable-inetd-time-plugin	\
+		 --with-heading="Alpine Linux 3.13"
 		 --with-heading="Alpine Linux 3.6" --with-hostname=alpine
 echo
 echo "*** Building ..."
@@ -1,27 +1,23 @@
 SUBDIRS    = available
 docsdir   := @docdir@/contrib/alpine/finit.d
-d_LINKS    = dropbear.conf getty.conf keymap.conf modules.conf klogd.conf \
+d_LINKS    = acpid.conf crond.conf dropbear.conf getty.conf	\
-	     syslogd.conf
+	     keymap.conf modules.conf ntpd.conf			\
 	     klogd.conf syslogd.conf
 install-exec-hook:
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/available
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/enabled
 	@for file in $(d_LINKS); do				\
-		lnk=$(DESTDIR)$(docsdir)/$$file;		\
+		lnk=$(DESTDIR)$(docsdir)/enabled/$$file;	\
 		src=available/$$file;				\
-		if [ -L $$lnk ]; then				\
+		rm -f $$lnk;					\
-			echo "Skipping $$lnk exists.";		\
+		$(LN_S) ../$$src $$lnk;				\
 		else						\
 			$(LN_S) $$src $$lnk;			\
 		fi;						\
 	done
 uninstall-hook:
 	@for file in $(d_LINKS); do				\
-		lnk=$(DESTDIR)$(docsdir)/$$file;		\
+		lnk=$(DESTDIR)$(docsdir)/enabled/$$file;	\
 		src=available/$$file;				\
-		if [ "`readlink $$lnk`" != "$$src" ]; then 	\
+		$(RM) -f $$lnk;					\
 			continue; 				\
 		fi;						\
 		$(RM) $$lnk;					\
 	done
@@ -1,4 +1,5 @@
 docsdir   := @docdir@/contrib/alpine/finit.d/available
-docs_DATA  = acpid.conf crond.conf dropbear.conf getty.conf keymap.conf \
+docs_DATA  = acpid.conf crond.conf dropbear.conf getty.conf keymap.conf	\
-             lxdm.conf modules.conf ntpd.conf klogd.conf syslogd.conf
+             lxdm.conf modules.conf ntpd.conf klogd.conf syslog.conf	\
 	     watchdog.conf
 EXTRA_DIST = $(docs_DATA)
@@ -1,3 +1,3 @@
 # Handle PWR button to shutdown/reboot -- useful in Qemu (virt-manager)
 # Depends on syslogd having started. Redirect any output to log.
-service [2345] log <svc/sbin/syslogd> /sbin/acpid -f -- ACPI daemon
+service [2345] <pid/syslogd> log acpid -f -- ACPI daemon
@@ -1 +1 @@
-service [2345] <svc/sbin/syslogd> /usr/sbin/crond -f -S -c /etc/crontabs -- Cron daemon
+service [2345] <pid/syslogd> env:-/etc/conf.d/crond crond -f -S $CRON_OPTS -- Cron daemon
@@ -1,2 +1,2 @@
 # Start SSH daemon as soon as basic networking comes up
-service [2345] <net/lo/up> /usr/sbin/dropbear -R -F -p 22 -- Dropbear SSH daemon
+service [2345] env:-/etc/conf.d/dropbear dropbear -R -F $DROPBEAR_OPTS -- Dropbear SSH daemon
@@ -1,4 +1,4 @@
 # Consoles to start getty on when system is up
-tty /dev/tty1 noclear nowait
+tty [12345] /dev/tty1 noclear nowait
-tty /dev/tty2 noclear nowait
+tty [2345]  /dev/tty2 noclear nowait
-tty /dev/tty3 noclear nowait
+tty [2345]  /dev/tty3 noclear nowait
@@ -1,2 +1,2 @@
 # Oneshot task to run once at bootstrap
-task [S] zcat /etc/keymap/se.bmap.gz | loadkmap -- Loading keymap
+task [S] env:/etc/conf.d/loadkmap zcat $KEYMAP | loadkmap -- Loading keymap
@@ -1,2 +1,2 @@
-# Start klogd as soon as possible, should always run
+# Start klogd as soon as possible, after syslogd, should always run
-service [S12345] /sbin/klogd -n -- Kernel log daemon
+service [S12345] <pid/syslogd> env:-/etc/conf.d/klogd klogd -n $KLOGD_OPTS -- Kernel log daemon
@@ -1 +1 @@
-service [2345] /usr/sbin/lxdm -- Lightweight Login Manager
+service [2345] lxdm -- Lightweight Login Manager
@@ -1,6 +1,6 @@
 ## Linux kernel modules to load
 #module fbcon
-module button
+#module button
-module evdev
+#module evdev
-module mousedev
+#module mousedev
-module 8139cp
+#module 8139cp
@@ -1,2 +1,2 @@
-# Silly Busybox ntpd has no option to use syslog when running in foreground
+# Busybox ntpd has no option to use syslog when running in foreground
-service [2345] log <svc/sbin/syslogd> /usr/sbin/ntpd -n -N -p pool.ntp.org -- NTP daemon
+service [2345] <pid/syslogd> env:-/etc/conf.d/ntpd log ntpd -n $NTPD_OPTS -- NTP daemon
@@ -0,0 +1,2 @@
 # Start syslogd as soon as possible, should always run
 service [S12345] env:-/etc/conf.d/syslog syslogd -n $SYSLOGD_OPTS -- Syslog daemon
@@ -1,2 +0,0 @@
 # Start syslogd as soon as possible, should always run
 service [S12345] /sbin/syslogd -n -- Syslog daemon
@@ -0,0 +1 @@
 service [S123456789] env:-/etc/conf.d/watchdog watchdog $WATCHDOG_OPTS $WATCHDOG_DEV -- System watchdog
@@ -1 +0,0 @@
 available/dropbear.conf
@@ -1 +0,0 @@
 available/getty.conf
@@ -1 +0,0 @@
 available/keymap.conf
@@ -1 +0,0 @@
 available/klogd.conf
@@ -1 +0,0 @@
 available/modules.conf
@@ -1 +0,0 @@
 available/syslogd.conf
@@ -29,7 +29,7 @@ if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
    echo
    echo "*** Installing Finit files ..."
    make install
-    cd `dirname $0`
+    cd /usr/share/doc/finit/contrib/alpine
    for file in finit.conf rc.local; do
 	install -vbD $file /etc/$file
    done
@@ -41,6 +41,11 @@ if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
 	cd /sbin
 	rm init
 	ln -s finit init
 	rm halt shutdown suspend
 	ln -s reboot halt
 	ln -s reboot shutdown
 	ln -s reboot suspend
    fi
    echo "*** Done"
    echo
@@ -0,0 +1,39 @@
 #!/bin/sh
 if [ "x`id -u`" != "x0" ]; then
    echo
    echo "*** This script must run as root"
    echo
    exit 1
 fi
 read -p "Do you really want to uninstall Finit (y/N)? " yorn
 if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
    echo
    echo "*** Removing all Finit files ..."
    rm -rf /usr/share/doc/finit
    rm -rf /etc/finit.conf
    rm -rf /etc/finit.d
    rm -rf /lib/finit
    if [ -e /etc/rc.local ]; then
 	echo "*** Skipping /etc/rc.local, not sure if we installed it ..."
    fi
    echo "*** Restoring BusyBox as /sbin/init ..."
    cd /sbin
    rm init
    ln -s /bin/busybox init
    rm halt shutdown reboot suspend
    ln -s /bin/busybox halt
    ln -s /bin/busybox shutdown
    ln -s /bin/busybox reboot
    ln -s /bin/busybox suspend
    echo "*** Done"
    echo
 else
    echo
    echo "*** Aborting uninstall."
    echo
 fi
@@ -21,14 +21,13 @@ echo
 # The plugins are optional, but you may need D-Bus and X11 if you want
 # to run X-Window, the other configure flags are however required.
-./configure									\
+./configure								\
-    --enable-rw-rootfs                --enable-progress				\
+    --prefix=/usr                     --exec-prefix=			\
-    --enable-dbus-plugin              --enable-x11-common-plugin		\
+    --sysconfdir=/etc                 --localstatedir=/var		\
-    --enable-alsa-utils-plugin        --enable-inetd-echo-plugin		\
+    --enable-dbus-plugin              --enable-x11-common-plugin	\
-    --enable-inetd-chargen-plugin     --enable-inetd-daytime-plugin		\
+    --enable-alsa-utils-plugin						\
-    --enable-inetd-discard-plugin     --enable-inetd-time-plugin		\
+    --with-random-seed=/var/lib/urandom/random-seed			\
-    --with-random-seed=/var/lib/urandom/random-seed				\
+    --with-heading="Debian GNU/Linux"
    --with-heading="Debian GNU/Linux" --with-hostname="stretch"
 if [ $? -ne 0 ]; then
    echo
@@ -5,23 +5,18 @@ d_LINKS    = console-setup.conf getty.conf keyboard-setup.conf	\
 install-exec-hook:
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/available
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/enabled
 	@for file in $(d_LINKS); do				\
-		lnk=$(DESTDIR)$(docsdir)/$$file;		\
+		lnk=$(DESTDIR)$(docsdir)/enabled/$$file;	\
 		src=available/$$file;				\
-		if [ -L $$lnk ]; then				\
+		rm -f $$lnk;					\
-			echo "Skipping $$lnk exists.";		\
+		$(LN_S) ../$$src $$lnk;				\
 		else						\
 			$(LN_S) $$src $$lnk;			\
 		fi;						\
 	done
 uninstall-hook:
 	@for file in $(d_LINKS); do				\
-		lnk=$(DESTDIR)$(docsdir)/$$file;		\
+		lnk=$(DESTDIR)$(docsdir)/enabled/$$file;	\
 		src=available/$$file;				\
-		if [ "`readlink $$lnk`" != "$$src" ]; then 	\
+		$(RM) -f $$lnk;					\
 			continue; 				\
 		fi;						\
 		$(RM) $$lnk;					\
 	done
@@ -1,5 +1,5 @@
 docsdir   := @docdir@/contrib/debian/finit.d/available
-docs_DATA  = acpid.conf console-setup.conf getty.conf		\
+docs_DATA  = acpid.conf console-setup.conf getty.conf keyboard-setup.conf \
-             keyboard-setup.conf lightdm.conf modules.conf	\
+	     lightdm.conf modules.conf rsyslogd.conf sntpd.conf		  \
-             ntpclient.conf rsyslogd.conf sshd.conf xdm.conf
+	     sshd.conf syslogd.conf xdm.conf
 EXTRA_DIST = $(docs_DATA)
@@ -1,3 +1,3 @@
 # Handle PWR button to shutdown/reboot -- useful in Qemu (virt-manager)
-# Depends on rsyslogd having started. Redirect any output to log.
+# Depends on a syslog daemon having started. Redirect any output to log.
-service [2345] <svc/usr/sbin/rsyslogd> log /usr/sbin/acpid -f	-- ACPI daemon
+service [2345] <pid/syslogd> env:-/etc/default/acpid log acpid -f $OPTIONS -- ACPI daemon
@@ -1,4 +1,4 @@
 # Consoles to start getty on when system is up
-tty [12345] /dev/tty1 115200 vt100 noclear nowait
+tty [12345] /dev/tty1 linux noclear nowait
-tty [2345]  /dev/tty2  38400 linux noclear nowait
+tty [2345]  /dev/tty2 linux noclear nowait
-tty [2345]  /dev/tty3  38400 linux noclear nowait
+tty [2345]  /dev/tty3 linux noclear nowait
@@ -1 +1 @@
-service [3] /usr/sbin/lightdm -- Light Display Manager
+service [3] lightdm -- Light Display Manager
@@ -1,8 +1,8 @@
 ## Linux kernel modules to load
 #module fbcon
-module button
+#module button
-module evdev
+#module evdev
-module loop
+#module loop
-module psmouse
+#module psmouse
-module mousedev
+#module mousedev
-module 8139cp
+#module 8139cp
@@ -1,2 +0,0 @@
 # Simple NTP client (SNTP)
 service [2345] <net/route/default> /usr/sbin/ntpclient -n -L pool.ntp.org -- SNTP client
@@ -1,2 +1,3 @@
 # Start rsyslogd as soon as possible, should always run
-service [S12345] /usr/sbin/rsyslogd -n -- Reliable and extended syslog daemon
+# Provides pid/syslogd condition
 service [S12345] name:syslogd env:-/etc/default/rsyslog rsyslogd -n $RSYSLOGD_OPTIONS -- Reliable syslog daemon
@@ -0,0 +1,2 @@
 # Simple NTP client (SNTP)
 service [2345] <net/route/default> env:-/etc/default/sntpd sntpd -n $SNTPD_OPTIONS -- SNTP client
@@ -1,2 +1,2 @@
 # Start SSH daemon as soon as basic networking comes up
-service [2345] <net/lo/up> /usr/sbin/sshd -D -- OpenSSH daemon
+service [2345] <net/lo/up> env:-/etc/default/ssh /usr/sbin/sshd -D $SSHD_OPTS -- OpenSSH daemon
@@ -0,0 +1,2 @@
 # Start sysklogd as soon as possible, should always run if enabled
 service [S123456789] env:-/etc/default/syslogd syslogd -F $SYSLOGD_OPTIONS -- System logging daemon
@@ -1,4 +1,4 @@
 # Here we use XDM since it has few dependencies (relatively speaking).
 # It is also an example of a service without a -- description.
-# service [3] /usr/sbin/lxdm -- Lightweight Login Manager
+# service [3] lxdm -- Lightweight Login Manager
-service [3] /usr/bin/xdm -nodaemon
+service [3] xdm -nodaemon -- X Display Manager
@@ -1 +0,0 @@
 available/console-setup.conf
@@ -1 +0,0 @@
 available/getty.conf
@@ -1 +0,0 @@
 available/keyboard-setup.conf
@@ -1 +0,0 @@
 available/modules.conf
@@ -1 +0,0 @@
 available/rsyslogd.conf
@@ -1 +0,0 @@
 available/sshd.conf
@@ -31,8 +31,10 @@ echo
 if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
    echo "Installing Finit files ..."
    make install
-    cd `dirname $0`
+    cd /usr/share/doc/finit/contrib/debian
-    install -vbD finit.conf /etc/finit.conf
+    for file in finit.conf; do
 	install -vbD $file /etc/$file
    done
    cp -va finit.d /etc/
    echo "*** Setting up a GRUB boot entry ..."
@@ -2,9 +2,6 @@
 #
 host testbed
 # Devices to fsck at boot
 check /dev/vda1
 # Linux kernel modules to load
 module button
 module evdev
@@ -33,28 +30,21 @@ tty /dev/tty3
 #run [2] /etc/init.d/networking start      -- Start networking
 # Services to be monitored and respawned as needed
-service [2345] /sbin/klogd -n             -- Kernel logging server
+service [2345] <pid/syslogd> klogd -n     -- Kernel logging server
-service [2345] /sbin/syslogd -n           -- Syslog server
+service [2345] syslogd -n                 -- Syslog server
-service [3] /usr/sbin/gdm                 -- GNOME Display Manager
+service [3]    gdm                        -- GNOME Display Manager
 # The BusyBox ntpd does not use syslog when running in the foreground
 # So we use this trick to redirect stdout/stderr to a log file.  The
 # log file is rotated with the above settings.  The condition declares
 # a dependency on a system default route (gateway) to be set.  A single
 # <!> at the beginning means ntpd does not respect SIGHUP for restart.
-service [2345] log:/var/log/ntpd.log <!net/route/default> /sbin/ntpd -n -l -I eth0 -- NTP daemon
+service [2345] <!net/route/default> log:/var/log/ntpd.log ntpd -n -l -I eth0 -- NTP daemon
 # Run start scripts from this directory
 # runparts /etc/start.d
 # Inetd services
 inetd time/udp                wait [2345] internal          -- UNIX rdate service
 inetd time/tcp              nowait [2345] internal          -- UNIX rdate service
 inetd ssh@eth0:222/tcp      nowait [2345] /usr/sbin/sshd -i -- SSH service
 inetd ssh/tcp               nowait [2345] /usr/sbin/sshd -i -- SSH service
 # For multiple instances of the same service, add :ID somewhere between
 # the service/run/task keyword and the command.
-service :1 [2345] /sbin/httpd -f -h /http -p 80   -- Web server
+service :80   [2345] /sbin/httpd -f -h /http -p 80   -- Web server
-service :2 [2345] /sbin/httpd -f -h /http -p 8080 -- Old web server
+service :8080 [2345] /sbin/httpd -f -h /http -p 8080 -- Old web server
@@ -0,0 +1,15 @@
 # This is a basic /etc/fstab that mounts up all of the virtual filesystems
 # that older versions of Finit used to mount internally. It can serve as a
 # starting point for systems running Busybox's mount implementation. Make
 # sure that CONFIG_FEATURE_MOUNT_HELPERS enabled; as this is required
 # create the /dev/{pts,shm} directories.
 devtmpfs	/dev		devtmpfs	defaults		0	0
 mkdir#-p	/dev/pts	helper		none			0	0
 devpts		/dev/pts	devpts		mode=620,ptmxmode=0666	0	0
 mkdir#-p	/dev/shm	helper		none			0	0
 tmpfs		/dev/shm	tmpfs		mode=0777		0	0
 proc		/proc		proc		defaults		0	0
 tmpfs		/tmp		tmpfs		mode=1777,nosuid,nodev	0	0
 tmpfs		/run		tmpfs		mode=0755,nosuid,nodev	0	0
 sysfs		/sys		sysfs		defaults		0	0
@@ -14,12 +14,11 @@ fi
 # The plugins are optional, but you may need D-Bus and X11 if you want
 # to run X-Window, the other configure flags are however required.
 PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig:/usr/local/lib/pkgconfig ./configure	\
-		 --enable-rw-rootfs            --enable-progress		\
+		 --prefix=/usr                  --exec-prefix=			\
-                 --enable-dbus-plugin          --enable-x11-common-plugin	\
+		 --sysconfdir=/etc              --localstatedir=/var		\
-		 --enable-alsa-utils-plugin    --enable-inetd-echo-plugin	\
+                 --enable-dbus-plugin           --enable-x11-common-plugin	\
-		 --enable-inetd-chargen-plugin --enable-inetd-daytime-plugin	\
+		 --enable-alsa-utils-plugin	--enable-watchdog		\
-		 --enable-inetd-discard-plugin --enable-inetd-time-plugin	\
+		 --with-heading="Void Linux"
 		 --with-heading="Void Linux"   --with-hostname=void
 echo
 echo "*** Building ..."
@@ -4,23 +4,18 @@ d_LINKS    = acpid.conf dhcpcd.conf getty.conf sshd.conf uuidd.conf
 install-exec-hook:
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/available
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/enabled
 	@for file in $(d_LINKS); do				\
-		lnk=$(DESTDIR)$(docsdir)/$$file;		\
+		lnk=$(DESTDIR)$(docsdir)/enabled/$$file;	\
 		src=available/$$file;				\
-		if [ -L $$lnk ]; then				\
+		rm -f $$lnk;					\
-			echo "Skipping $$lnk exists.";		\
+		$(LN_S) ../$$src $$lnk;				\
 		else						\
 			$(LN_S) $$src $$lnk;			\
 		fi;						\
 	done
 uninstall-hook:
 	@for file in $(d_LINKS); do				\
-		lnk=$(DESTDIR)$(docsdir)/$$file;		\
+		lnk=$(DESTDIR)$(docsdir)/enabled/$$file;	\
 		src=available/$$file;				\
-		if [ "`readlink $$lnk`" != "$$src" ]; then 	\
+		$(RM) -f $$lnk;					\
 			continue; 				\
 		fi;						\
 		$(RM) $$lnk;					\
 	done
@@ -1 +0,0 @@
 available/acpid.conf
@@ -1,3 +1,3 @@
 # Handle PWR button to shutdown/reboot -- useful in Qemu (virt-manager)
 # Depends on syslogd having started. Redirect any output to log.
-service [2345] /sbin/acpid -f -- ACPI daemon
+service [2345] acpid -f -- ACPI daemon
@@ -1 +1 @@
-service [2345] <svc/sbin/syslogd> /usr/sbin/crond -f -S -c /etc/crontabs -- Cron daemon
+service [2345] <pid/syslogd> crond -f -S -c /etc/crontabs -- Cron daemon
@@ -1 +1 @@
-service [2345] /usr/sbin/dhcpcd -B -M -- DHCP client
+service [2345] dhcpcd -B -M -- DHCP client
@@ -1 +1 @@
-service [S12345] /sbin/dmeventd -f -- Device mapper event daemon
+service [S12345] dmeventd -f -- Device mapper event daemon
@@ -1,4 +1,4 @@
 # Consoles to start Finit built-in getty on when system is up
-tty /dev/tty1 noclear nowait
+tty [12345] /dev/tty1 noclear nowait
-tty /dev/tty2 noclear nowait
+tty [2345]  /dev/tty2 noclear nowait
-tty /dev/tty3 noclear nowait
+tty [2345]  /dev/tty3 noclear nowait
@@ -1,2 +1,2 @@
 # Start klogd as soon as possible, should always run
-service [S12345] /sbin/klogd -n -- Kernel log daemon
+service [S12345] <pid/syslogd> klogd -n -- Kernel log daemon
@@ -1 +1 @@
-service [2345] /usr/sbin/lxdm -- Lightweight Login Manager
+service [2345] lxdm -- Lightweight Login Manager
@@ -1,6 +1,6 @@
 ## Linux kernel modules to load
 #module fbcon
-module button
+#module button
-module evdev
+#module evdev
-module mousedev
+#module mousedev
-module 8139cp
+#module 8139cp
@@ -1,2 +1,2 @@
 # Silly Busybox ntpd has no option to use syslog when running in foreground
-service [2345] log <svc/sbin/syslogd> /usr/sbin/ntpd -n -N -p pool.ntp.org -- NTP daemon
+service [2345] <pid/syslogd> log ntpd -n -N -p pool.ntp.org -- NTP daemon
@@ -1,2 +1,2 @@
 # Start SSH daemon as soon as basic networking comes up
-service [2345] <net/lo/up> /usr/sbin/sshd -D -- OpenSSH daemon
+service [2345] /usr/sbin/sshd -D -- OpenSSH daemon
@@ -1,2 +1,2 @@
 # Start syslogd as soon as possible, should always run
-service [S12345] /sbin/syslogd -n -- Syslog daemon
+service [S12345] syslogd -n -- Syslog daemon
@@ -1 +1 @@
-service @uuidd:uuidd [2345] /sbin/uuidd -F -- UUID generation daemon
+service @uuidd:uuidd [2345] uuidd -F -- UUID generation daemon
@@ -1 +0,0 @@
 available/dhcpcd.conf
@@ -1 +0,0 @@
 available/getty.conf
@@ -1 +0,0 @@
 available/sshd.conf
@@ -1 +0,0 @@
 available/uuidd.conf
@@ -30,7 +30,7 @@ if [ "x$yorn" = "xy" -o "x$yorn" = "xY" ]; then
    echo
    echo "*** Installing Finit files ..."
    make install
-    cd `dirname $0`
+    cd /usr/share/doc/finit/contrib/void
    for file in finit.conf rc.local; do
 	install -vbD $file /etc/$file
    done
@@ -0,0 +1,4 @@
 docsdir   := @docdir@/doc
 docs_DATA  = config.md conditions.md distro.md plugins.md	\
 	     service.md signals.md svc-machine.png cmdline.md
 EXTRA_DIST = $(docs_DATA)
@@ -0,0 +1 @@
 config.md
@@ -0,0 +1,44 @@
 Goals of Finit
 ==============
 Initially Finit aimed to be more than a processes monitor, acting as a
 replacement for cron/at and inetd as well.  Over time, however, the true
 value in the project turned out to be:
 > A simple SysV init and systemd replacement, primarily for embedded
 > systems, container, and dedicated server applications.
 Misc TODOs
 ----------
 Some of these are also registered in the issue tracker on GitHub.
 * Refactor the .conf parser, parse user input in a separate process
 * Move process monitor to separate process (same as parser?)
 * Add new (complimentary) .svc file format to slowly migrate away
  from the very terse one-liner format currently used
 * Allow running as non-pid1 => read .conf and RCSD form cmdline
 * When a process dies, and Finit does not restart it, we should collect
  a `siginfo_t` from the SIGCHLD signal and supply to the user in case
  `initctl status <process>` is called to debug the issue.
 * Add `finit.conf` support for UPS notification (SIGPWR) to start a task
  using, e.g. <sys/power/{ok,fail,low}> conditions.  More info in sig.c
 * Add `finit.conf` support for ctrl-alt-delete (SIGINT) and kbrequest,
  i.e. KeyboardSignal, (SIGWINCH) behavior.  Using conditions to a task,
  e.g, <sys/key/ctrlaltdel> and <sys/key/signal> like SIGPWR handling.
 * Write man pages for finit and `finit.conf`, steal from the excellent
  `pimd` man pages ...
 * Add support for timed shutdown in Finit, including cancelled shutdown
 * Add support for JSON output, or similar, from `initctl show`, e.g.
  `initctl show --json`
 Init
 ----
 Finit in itself is not SysV Init compatible, it doesn't use `/etc/rc.d`
 and `/etc/init.d` scripts to boot the system.  However, a plausible way
 to achieve compatibility would be to add a plugin to finit which reads
 `/etc/inittab` to be able to start standard Linux systems.
@@ -12,7 +12,7 @@ Bootstrap
 9. Parse `/etc/finit.conf` and all `/etc/finit.d/*.conf` files
 10. Start built-in watchdog, if enabled
 11. Set hostname
-12. Pivot root, or remount `/` read-write, depending on system type
+12. Remount `/` read-write if `/` is listed in `/etc/fstab` without `ro`
 13. Call 1st level hooks, `HOOK_ROOTFS_UP`
 14. Mount all file systems listed in `/etc/fstab` and swap, if available
 15. Enable SysV init signals
@@ -29,8 +29,8 @@ optional plugins to enable.  It depends on two external libraries:
 The configure script checks for all dependencies, including the correct
 version of the above mentioned libraries.  Currently requried versions:
- libite v2.0.1
+- libite v2.2.0
- libuEv v2.1.0
+- libuEv v2.2.0
 Configure
@@ -38,12 +38,16 @@ Configure
 Below are a few of the main switches to configure:
-* `--disable-inetd`: Disable the built-in inetd server.
+* `--prefix=..`: Usually you want to set this to `/usr`, default is the GNU
  default: `/usr/local`
-* `--enable-rw-rootfs`: Most desktop and server systems boot with the
+* `--exec-prefix=..`: This you want to set to the empty string, or `/`, to
-  root file stystem read-only.  With this setting Finit will remount it
+  ensure the programs `finit` and `initctl` are installed to the proper
-  as read-write early at boot so the `bootmisc.so` plugin can run.
+  locations.  Linux expects an "init" in `/sbin`, default: `--prefix`
-  Usually not needed on embedded systems.
+
 * `--sysconfdir=..`: follows `--prefix`, you likely want it to be `/etc`
 * `--localstatedir=..`: follows `--prefix`, you likely want `/var`
 * `--enable-static`: Build Finit statically.  The plugins will be
  built-ins (.o files) and all external libraries, except the C library
@@ -66,22 +70,21 @@ Example
 First, unpack the archive:
 ```shell
-    $ tar xf finit-3.0.tar.xz
+$ tar xf finit-3.0.tar.xz
-    $ cd finit-3.0/
+$ cd finit-3.0/
 ```
 Then configure, build and install:
 ```shell
-    $ ./configure --enable-rw-rootfs            --enable-inetd-echo-plugin        \
+$ ./configure --prefix=/usr                 --exec-prefix=                    \
-                  --enable-inetd-chargen-plugin --enable-inetd-daytime-plugin     \
+              --sysconfdir=/etc             --localstatedir=/var              \
-                  --enable-inetd-discard-plugin --enable-inetd-time-plugin        \
+              --with-heading="Alpine Linux 3.13" --with-hostname=alpine
-                  --with-heading="Alpine Linux 3.4" --with-hostname=alpine
+$ make
-    $ make
+.
-    .
+.
-    .
+.
-    .
+$ DESTDIR=/tmp/finit make install
    $ DESTDIR=/tmp/finit make install
 ```
 In this example the [finit-3.0.tar.xz][1] archive is unpacked to the
@@ -0,0 +1,46 @@
 Tips & Tricks with the kernel cmdline
 =====================================
 This document summarizes the different boot parameters that can be
 passed on the Linux kernel command line.  Not limited to Finit.
 The `bool` setting is one of `on, off, true false, 1, 0`.
 * `debug`: Enable kernel debug.  Debug messages are printed to the
    console until Finit starts up.
 * `finit.debug[=bool]`: Enable finit debug.  This is operated
 	independently of the kernel debug setting.  New as of Finit v4.
 * `finit.show_status[=bool]`: Control finit boot progress, including
  banner.
 * `finit.status_style=<classic,modern>`: Set Finit boot progress style,
  when enabled.
 * `init=/bin/sh`: Bypass system default init and tell kernel to start a
 	shell.  Note, this shell is very limited and does not support
 	signals and has no job control.  Recommend using, and modifying,
 	`rescue` mode instead.
 * `panic=SEC`: By default the kernel does not reboot after a kernel
    panic.  This setting will cause a kernel reboot after SEC seconds.
 * `quiet`: Suppress kernel logging to console, except for warnings and
  errors.
 * `rescue`: Start Finit rescue mode; no network, no `fsck` of file
    systems in `/etc/fstab`, no `/etc/rc.local`, no `runparts`.  The
    configuration is read from `/lib/finit/rescue.conf`, and can be
    modified by the operator.
 * `single`, or `S`: Single user mode, runlevel 1, in Finit.  Useful to
    debug problems with the regular runlevel.  All services and TTYs in
    `[1]` will be started, so a `tty [1] @console nologin` configuration
    presents you with a root console without login.
 For more on kernel boot paramaters, see the man page [bootparam(7)][].
 [bootparam(7)]: https://www.man7.org/linux/man-pages/man7/bootparam.7.html
@@ -17,8 +17,8 @@ Conditions are a new addition to Finit, introduced in v3, with the
 intention of providing a mechanism for common synchronization problems.
 For example:
- *"do not start this service until another process has started"*, or
+- *"wait for service A to start before starting service B"*, or
- *"do not starty until basic network access is available"*
+- *"wait for basic network access to be available"*
 Conditions are similar in syntax to declaring runlevels per service.
 They are specified within angle brackets `<>` and can be applied to any
@@ -30,14 +30,12 @@ service to run.
 ### Example
-```shell
+    service [2345] <pid/setupd,pid/zebra> /sbin/netd -- Network monitor
    service [2345] <svc/sbin/setupd,svc/sbin/zebra> /sbin/netd -- Network monitor
 ```
 In this example the Network monitor daemon `netd` is not started until
-both the `svc/sbin/setupd` *and* `svc/sbin/zebra` conditions are
+both the `pid/setupd` *and* `pid/zebra` conditions are satisfied.  A
-satisfied.  An `svc` condition is satisfied by the corresponding
+`pid/` condition is satisfied by the corresponding service's PID file
-service's PID file being created.
+being created.
 **NOTE:** Conditions also stop services when a condition is no longer
  asserted.  I.e., if the Zebra process above stops or restarts, netd
@@ -47,17 +45,7 @@ service's PID file being created.
 Triggering
 ----------
-Conditions are triggered by built-in plugins, but can for debugging
+Conditions can only be triggered by built-in plugins.
 purposes also be controlled using the `cond set` and `cond clear`
 sub-commands to the `initctl` control tool:
 * `initctl cond set your/cond/here`
  To set a condition
 * `initctl cond clear your/cond/here`
  To clear a condition
 Conditions retain their current state until the next reconfiguration or
 runlevel change.  At that point all set conditions transition into the
@@ -66,32 +54,33 @@ on this, see [Internals](#internals).)  Thus, after a reconfiguration it
 is up to the "owner" of the condition to convey the new (or possibly
 unchanged) state of it.
 > **Note:** For `pid/` conditions it is expected that services "touch"
 >           or recreate their PID file on `SIGHUP`.
 Built-in Conditions
 -------------------
-Finit is distributed with a `pidfile` and `netlink` plugin.  If enabled,
+Finit comes with a `pidfile` and `netlink` plugin.  When enabled, the
-the `pidfile` plugin watches `/var/run/` for PID files created by the
+`pidfile` plugin watches `/var/run/` (recursively) for PID files created
-monitored services, and sets a corresponding condition in the `svc/`
+by the monitored services, and sets a corresponding condition in the
-namespace.  Similarily, the `netlink` plugin provides basic conditions
+`pid/` namespace.  Similarily, the `netlink` plugin provides basic
-for when an interface is brought up/down and when a default route
+conditions for when an interface is brought up/down and when a default
-(gateway) is set, in the `net/` namespace.
+route (gateway) is set, in the `net/` namespace.
 With the example listed above, finit does not start the `/sbin/netd`
 daemon until `setupd` and `zebra` has started *and* created their PID
 files.  Which they do when they have completed their initial set up and
 are ready to receive signals.
-The full path to the dependency is needed by finit to match the PID file
+Finit expects monitored services to touch their PID files, i.e. update
-to a monitored process.  Finit expects monitored services to touch their
+the mtime, when they reload their configuration files after a `SIGHUP`.
-PID files, i.e. update the mtime, when they reload their configuration
+Some services do not support `SIGHUP` and are instead restarted, which
-files after a `SIGHUP`.  Some services do not support `SIGHUP` and are
+is a crude but effective way to have the PID file touched (re-created).
 instead restarted, which is a crude but effective way to have the PID
 file touched (re-created).
 Built-in conditions:
- `svc/<PATH>`
+- `pid/<SERVICE>`
 - `net/route/default`
 - `net/<IFNAME>/exist`
 - `net/<IFNAME>/up`
@@ -102,6 +91,39 @@ Built-in conditions:
  difference is that `running` tells if the NIC has link.
 Composition
 -----------
 The `pid/` conditions are generated by the Finit `pidfile.so` plugin and
 composed from a service's `name:` and `:id`.  By default the basename of
 the daemon and the empty string.
 | **service**                                        | **condition**    |
 |----------------------------------------------------|------------------|
 | /sbin/foo                                          | pid/foo          |
 | /sbin/bar -p /run/baz.pid                          | pid/bar          |
 | name:lxc :foo lxc-start -n foo -p /run/lxc/foo.pid | pid/lxc:foo      |
 | /usr/bin/dbus-daemon                               | pid/dbus-daemon  |
 | :222 dropbear -p 222                               | pid/dropbear:222 |
 The condition is asserted when `pidfile.so` receives an inotify event
 for a file matching `/run/*.pid`, `/run/**/*.pid`, or `/run/**/pid`,
 which contains the PID of the service Finit has started.
 When Finit configuration files are changed and the `initctl reload`
 command is called, it is expected of services to touch their PID files
 for Finit to reassert their conditions.
 Daemons that don't create PID files, or fail to touch them on reload,
 can be worked around by using the `pid:/path/to/file.pid` syntax in
 the service stanza for the daemon.  It is far from optimal since any
 synchronization of depending services may fail due to the daemon not
 having reinitialized/created their IPC sockets, or similar.
 > **Note:** in versions of Finit prior to v4, the PID conditions were
 >           called 'svc' conditions, and they were far more complex.
 Debugging
 ---------
@@ -116,11 +138,11 @@ conditions that are not satisfied.  Listed as `off` below.
 **Example:**
 ```shell
-    ~ # initctl cond show
+~ # initctl cond show
-    PID     Service               Status  Condition (+ on, ~ flux, - off)
+PID     IDENT         STATUS  CONDITION (+ ON, ~ FLUX, - OFF)
-    ===============================================================================
+=======================================================================
-    1419    /sbin/netd            on      <+svc/sbin/setupd,+svc/sbin/zebra>
+1419    /sbin/netd    on      <+pid/setupd,+pid/zebra>
-    0       /sbin/udhcpc          off     <-net/vlan1/exist>
+0       /sbin/udhcpc  off     <-net/vlan1/exist>
 ```
 Here we can see that `netd` is allowed to run since both its conditions
@@ -132,24 +154,26 @@ To fake interface `vlan1` suddenly appearing, and test what happens to
 `udhcpc` we can enable debug mode and assert the condition, like this:
 ```shell
-    ~ # initctl debug
+~ # initctl debug
-    ~ # initctl cond set net/vlan1/exist
+~ # mkdir -p /var/run/finit/cond/net/vlan1
 ~ # cp /var/run/finit/cond /var/run/finit/cond/net/vlan1/exist
 ```
 Then watch the console for the debug messages and then check the output
-from `initctl cond show` again.  (The client will likely have failed to
+from `initctl cond show` again.  The client will likely have failed to
-start, but at least the condition is now satisfied.)
+start, but at least the condition is now satisfied.
 There is also the `initctl cond dump` command, which dumps all known
-conditions and their current status.
+conditions, their current status, and their origin.
 Internals
 ---------
-Conditions are implemented as simple files in the file system, in the
+As shown previously, conditions are implemented as simple files in the
-`/var/run/finit/cond/` sub-directory.  Use the `initctl cond set/clear`
+file system, in the `/var/run/finit/cond/` sub-directory.  The files
-commands to add/remove files in this hierarchy.
+are created, updated, and removed by condition plugins.  To debug them,
 see the previous section.
 A condition is always in one of three states:
@@ -0,0 +1,510 @@
 Configuration
 =============
 * [Introduction](#introduction)
 * [Service Wrapper Scripts](#service-wrapper-scripts)
 * [Configuration File Syntax](#configuration-file-syntax)
  * [Hostname](#hostname)
  * [Kernel Modules](#kernel-modules)
  * [Networking](#networking)
  * [Resource Limits](#resource-limits)
  * [Runlevels](#runlevels)
  * [One-shot Commands (sequence)](#one-shot-commands--sequence-)
  * [One-shot Commands (parallel)](#one-shot-commands--parallel-)
  * [SysV Init Scripts](#sysv-init-scripts)
  * [Services](#services)
  * [Run-parts Scripts](#run-parts-scripts)
  * [Including Finit Configs](#including-finit-configs)
  * [General Logging](#general-logging)
  * [TTYs and Consoles](#ttys-and-consoles)
  * [Non-privileged Services](#non-privileged-services)
  * [Redirecting Output](#redirecting-output)
 * [Limitations](#limitations)
  * [/etc/finit.conf](#etcfinitconf)
  * [/etc/finit.d](#etcfinitd)
 Introduction
 ------------
 Finit can be configured using only the original `/etc/finit.conf` file
 or in combination with `/etc/finit.d/*.conf`.  Useful for package-based
 Linux distributions -- each package can provide its own "script" file.
 - `/etc/finit.conf`: main configuration file
 - `/etc/finit.d/*.conf`: snippets, usually one service per file
 Not all configuration directives are available in `/etc/finit.d/*.conf`
 and some directives are only available at bootstrap, runlevel `S`, see
 the section [Limitations](#limitations) below for details.
 To add a new service, simply drop a `.conf` file in `/etc/finit.d` and
 run `initctl reload`.  (It is also possible to `SIGHUP` to PID 1, or
 call `finit q`, but that has been deprecated with the `initctl` tool).
 Finit monitors all known active `.conf` files, so if you want to force
 a restart of any service you can simply touch its corresponding `.conf`
 file in `/etc/finit.d` and call `initctl reload`.  Finit handle any
 and all conditions and dependencies between services automatically.
 It is also possible to drop `.conf` files in `/etc/finit.d/available/`
 and use `initctl enable` to enable a service `.conf` file.  This may be
 useful in particular to Linux distributions that may want to install all
 files for a package and let the user decide when to enable a service.
 On `initctl reload` the following is checked for all services:
 - If a service's `.conf` file has been removed, or its conditions are no
  longer satisifed, the service is stopped.
 - If the file is modified, or a service it depends on has been reloaded,
  the service is reloaded (stopped and started).
 - If a new service is added it is automatically started — respecting
  runlevels and return values from any callbacks.
 For more info on the different states of a service, see the separate
 document [Finit Services](service.md).
 > When running <kbd>make install</kbd> no default `/etc/finit.conf` is
 > installed since system requirements differ too much.  There are some
 > examples in the `contrib/` directory, which can be used as a base.
 Service Environment
 -------------------
 Finit supports sourcing environment variables from `/etc/default/*`, or
 similar `--with-sysconfig=DIR`.  This is a common pattern from SysV init
 scripts, where the start-stop script is a generic script for the given
 service, `foo`, and the options for the service are sourced from the
 file `/etc/default/foo`.  Like this:
 * `/etc/default/foo`:
        FOO_OPTIONS=--extra-arg="bar" -s -x
 * `/etc/finit.conf`:
        service [2345] env:-/etc/default/foo foo -n $FOO_OPTIONS -- Example foo daemon
 Here the service `foo` is started with `-n`, to make sure it runs in the
 foreground, and the with the options found in the environment file.  With
 the `ps` command we can see that the process is started with:
    foo -n --extra-arg=bar -s -x
 > **Note:** the leading `-` determines if Finit should treat a missing
 > environment file as blocking the start of the service or not.  When
 > `-` is used, a missing environment file does *not* block the start.
 Service Wrapper Scripts
 -----------------------
 If your service requires to run additional commands, executed before the
 service is actually started, like the systemd `ExecStartPre`, you can
 use a wrapper shell script to start your service.
 The Finit service `.conf` file can be put into `/etc/finit.d/available`,
 so you can control the service using `initctl`.  Then use the path to
 the wrapper script in the Finit `.conf` service stanza.  The following
 example employs a wrapper script in `/etc/start.d`.
 **Example:**
 * `/etc/finit.d/available/program.conf`:
        service [235] <!> /etc/start.d/program -- Example Program
 * `/etc/start.d/program:`
        #!/bin/sh
        # Prepare the command line options
        OPTIONS="-u $(cat /etc/username)"
        # Execute the program
        exec /usr/bin/program $OPTIONS
 > **Note:** the example sets `<!>` to denote that it doesn't support
 >           `SIGHUP`.  That way Finit will stop/start the service
 >           instead of sending SIGHUP at restart/reload events.
 Configuration File Syntax
 -------------------------
 ### Hostname
 **Syntax:** `host <NAME>`, or `hostname <NAME>`
 Set system hostname to NAME, unless `/etc/hostname` exists in which case
 the contents of that file is used.
 Deprecated.  We recommend using `/etc/hostname` instead.
 > **Note:** only read and executed in runlevel S (bootstrap).
 ### Kernel Modules
 **Syntax:** `module <MODULE> [ARGS]`
 Load a kernel module, with optional arguments.  Similar to `insmod`
 command line tool.
 Deprecated, there is both a `modules-load.so` and a `modprobe.so` plugin
 that can handle module loading better.  The former supports loading from
 `/etc/modules-load.d/`, the latter uses kernel modinfo to automatically
 load (or coldplug) every required module.  For hotplug we recommend the
 BusyBox mdev tool, add to `/etc/mdev.conf`:
    $MODALIAS=.*  root:root       0660    @modprobe -b "$MODALIAS"
 > **Note:** only read and executed in runlevel S (bootstrap).
 ### Networking
 **Syntax:** `network <PATH>`
 Script or program to bring up networking, with optional arguments.
 Deprecated.  We recommend using dedicated task/run stanzas per runlevel,
 or `/etc/network/interfaces` if you have a system with `ifupdown`, like
 Debian, Ubuntu, Linux Mint, or an embedded BusyBox system.
 > **Note:** only read and executed in runlevel S (bootstrap).
 ### Resource Limits
 **Syntax:** `rlimit [hard|soft] RESOURCE <LIMIT|unlimited>`
 Set the hard or soft limit for a resource, or both if that argument is
 omitted.  `RESOURCE` is the lower-case `RLIMIT_` string constants from
 `setrlimit(2)`, without prefix.  E.g. to set `RLIMIT_CPU`, use `cpu`.
 LIMIT is an integer that depends on the resource being modified, see
 the man page, or the kernel `/proc/PID/limits` file, for details.
 Finit versions before v3.1 used `infinity` for `unlimited`, which is
 still supported, albeit deprecated.
    # No process is allowed more than 8MB of address space
    rlimit hard as 8388608
    # Core dumps may be arbitrarily large
    rlimit soft core infinity
    # CPU limit for all services, soft & hard = 10 sec
    rlimit cpu 10
 `rlimit` can be set globally, in `/etc/finit.conf`, or locally per
 each `/etc/finit.d/*.conf` read.  I.e., a set of task/run/service
 stanzas can share the same rlimits if they are in the same .conf.
 ### Runlevels
 **Syntax:** `runlevel <N>`
 Defines the system runlevel to go to after bootstrap (S) has completed.
 N is the runlevel number 0-9, where 6 is reserved for reboot and 0 for
 halt.
 Default: 2
 > **Note:** only read and executed in runlevel S (bootstrap).
 ### One-shot Commands (sequence)
 **Syntax:** `run [LVLS] <COND> /path/to/cmd ARGS -- Optional description`
 One-shot command to run in sequence when entering a runlevel, with
 optional arguments and description.
 `run` commands are guaranteed to be completed before running the next
 command.  Highly useful if true serialization is needed.
 > `<COND>` is described in the [Services](#services) section.
 ### One-shot Commands (parallel)
 **Syntax:** `task [LVLS] <COND> /path/to/cmd ARGS -- Optional description`
 One-shot like 'run', but starts in parallel with the next command.
 Both `run` and `task` commands are run in a shell, so pipes and
 redirects can be freely used:
    task [s] echo "foo" | cat >/tmp/bar
 > `<COND>` is described in the [Services](#services) section.
 ### SysV Init Scripts
 **Syntax:** `sysv [LVLS] <COND> /path/to/init-script -- Optional description`
 Similar to `task` is the `sysv` stanza, which can be used to call SysV
 style scripts.  The primary intention for this command is to be able to
 re-use much of existing setup and init scripts in Linux distributions.
 When entering an allowed runlevel, Finit calls `init-script start`, when
 entering a disallowed runlevel, Finit calls `init-script stop`, and if
 the Finit .conf, where `sysv` stanza is declared, is modified, Finit
 calls `init-script restart` on `initctl reload`.  Similar to how
 `service` stanzas work.
 Forking services started with `sysv` scripts can be monitored by Finit
 by declaring the PID file to look for: `pid:!/path/to/pidfile.pid`.
 > `<COND>` is described in the [Services](#services) section.
 ### Services
 **Syntax:** `service [LVLS] <COND> /path/to/daemon ARGS -- Optional description`
 Service, or daemon, to be monitored and automatically restarted if it
 exits prematurely.  Finit tries to restart services that die 10 times
 before giving up, then you have to `initctl restart NAME` it manually.
 For daemons that support it, we recommend appending `--foreground`,
 `--no-background`, `-n`, `-F`, or similar command line argument to
 prevent them from forking off a sub-process in the background.  This is
 the most reliable way to monitor a service.
 However, not all daemons support running in the foreground, or they may
 start logging to the foreground as well, these are called forking
 services and are supported using the same syntax as forking `sysv`
 services, using the `pid:!/path/to/pidfile.pid` syntax.
 **Example:**
 In the case of `ospfd` (below), we omit the `-d` flag (daemonize) to
 prevent it from forking to the background:
    service [2345] <pid/zebra> /sbin/ospfd -- OSPF daemon
 `[2345]` denote the runlevels `ospfd` is allowed to run in, they are
 optional and default to level 2-5 if omitted.
 `<...>` is the condition for starting `ospfd`.  In this example Finit
 waits for another service, `zebra`, to have created its PID file in
 `/var/run/quagga/zebra.pid` before starting `ospfd`.  Finit watches
 *all* files in `/var/run`, for each file named `*.pid`, or `*/pid`,
 Finit opens it and find the matching `NAME:ID` using the PID.
 Some services do not maintain a PID file and rather than patching each
 application Finit provides a workaround.  A `pid` keyword can be set
 to have Finit automatically create (when starting) and later remove
 (when stopping) the PID file.  The file is created in the `/var/run`
 directory using the `basename(1)` of the service.  The default can be
 modified with an optional `pid:`-argument:
    pid[:[/path/to/]filename[.pid]]
 For example, by adding `pid:/run/foo.pid` to the service `/sbin/bar`,
 that PID file will, not only be created and removed automatically, but
 also be used by the Finit condition subsystem.  So a service/run/task
 can depend on `<pid/bar>`.
 >  For a detailed description of conditions, and how to debug them,
 >  see the [Finit Conditions](conditions.md) document.
 If a service should not be automatically started, it can be configured
 as manual with the optional `manual` argument. The service can then be
 started at any time by running `initctl start <service>`.
    manual:yes
 The name of a service, shown by the `initctl` tool, defaults to the
 basename of the service executable. It can be changed with the
 optional `name` argument:
    name:<service-name>
 When stopping a service (run/task/sysv/service), either manually or
 when moving to another runlevel, Finit starts by sending `SIGTERM`, to
 allow the process to shut down gracefully.  If the process has not
 been collected within 3 seconds, Finit sends `SIGKILL`.  To halt the
 process using a different signal, use the option `halt:SIGNAL`, e.g.,
 `halt:SIGPWR`.  To change the delay between your halt signal and KILL,
 use the option `kill:SEC`, e.g., `kill:10` to wait 10 seconds before
 sending `SIGKILL`.
 ### Run-parts Scripts
 **Syntax:** `runparts <DIR>`
 Call [run-parts(8)][] on `DIR` to run start scripts.  All executable
 files, or scripts, in the directory are called, in alphabetic order.
 The scripts in this directory are executed at the very end of runlevel
 `S`, bootstrap.
 It can be beneficial to use `S01name`, `S02othername`, etc. if there
 is a dependency order between the scripts.  Symlinks to existing
 daemons can talso be used, but make sure they daemonize by default.
 Similar to the `/etc/rc.local` shell script, make sure that all your
 services and programs either terminate or start in the background or
 you will block Finit.
 > **Note:** only read and executed in runlevel S (bootstrap).
 ### Including Finit Configs
 **Syntax:** `include <CONF>`
 Include another configuration file.  Absolute path required.
 ### General Logging
 **Syntax:** `log size:200k count:5`
 Log rotation for run/task/services using the `log` sub-option with
 redirection to a log file.  Global setting, applies to all services.
 The size can be given as bytes, without a specifier, or in `k`, `M`,
 or `G`, e.g. `size:10M`, or `size:3G`.  A value of `size:0` disables
 log rotation.  The default is `200k`.
 The count value is recommended to be between 1-5, with a default 5.
 Setting count to 0 means the logfile will be truncated when the MAX
 size limit is reached.
 ### TTYs and Consoles
 **Syntax:** `tty [LVLS] <DEV> [BAUD] [noclear] [nowait] [nologin] [TERM]`  
  `tty [LVLS] <CMD> <ARGS> [noclear] [nowait]`
 The first variant of this option uses the built-in getty on the given
 TTY device DEV, in the given runlevels.  The DEV may be the special
 keyword `@console`, or `console`, useful on embedded systems.
 The default baud rate is 0, i.e., keep kernel default.
 **Example:**
    tty [12345] /dev/ttyAMA0 115200 noclear vt220
 The second `tty` syntax variant is for using an external getty, like
 agetty or the BusyBox getty.
 By default both variants *clear* the TTY and *wait* for the user to
 press enter before starting getty.
 **Example:**
    tty [12345] /sbin/getty  -L 115200 /dev/ttyAMA0 vt100
    tty [12345] /sbin/agetty -L ttyAMA0 115200 vt100 nowait
 The `noclear` option disables clearing the TTY after each session.
 Clearing the TTY when a user logs out is usually preferable.
 The `nowait` option disables the `press Enter to activate console`
 message before actually starting the getty program.  On small and
 embedded systems running multiple unused getty wastes both memory
 and CPU cycles, so `wait` is the preferred default.
 The `nologin` option disables getty and `/bin/login`, and gives the
 user a root (login) shell on the given TTY `<DEV>` immediately.
 Needless to say, this is a rather insecure option, but can be very
 useful for developer builds, during board bringup, or similar.
 Notice the ordering, the `TERM` option to the built-in getty must be
 the last argument.
 Embedded systems may want to enable automatic `DEV` by supplying the
 special `@console` device.  This works regardless weather the system
 uses `ttyS0`, `ttyAMA0`, `ttyMXC0`, or anything else.  Finit figures
 it out by querying sysfs: `/sys/class/tty/console/active`.  The speed
 can be omitted to keep the kernel default.
 **Example:**
    tty [12345] @console noclear vt220
 On really bare bones systems Finit offers a fallback shell, which
 should not be enabled on production systems since.  This because it
 may give a user root access without having to log in.  However, for
 bringup and system debugging it can come in handy:
    configure --enable-fallback-shell
 One can also use the `service` stanza to start a stand-alone shell:
    service [12345] /bin/sh -l
 ### Non-privileged Services
 Every `run`, `task`, or `service` can also list the privileges the
 `/path/to/cmd` should be executed with.  Simply prefix the path with
 `[@USR[:GRP]]` like this:
    run [2345] @joe:users logger "Hello world"
 For multiple instances of the same command, e.g. a DHCP client or
 multiple web servers, add `:ID` somewhere between the `run`, `task`,
 `service` keyword and the command, like this:
    service :80  [2345] httpd -f -h /http -p 80   -- Web server
    service :8080[2345] httpd -f -h /http -p 8080 -- Old web server
 Without the `:ID` to the service the latter will overwrite the former
 and only the old web server would be started and supervised.
 ### Redirecting Output
 The `run`, `task`, and `service` stanzas also allow the keyword `log` to
 redirect `stderr` and `stdout` of the application to a file or syslog
 using the native `logit` tool.  This is useful for programs that do not
 support syslog on their own, which is sometimes the case when running
 in the foreground.
 The full syntax is:
    log:/path/to/file
    log:prio:facility.level,tag:ident
    log:console
    log:null
    log
 Default `prio` is `daemon.info` and default `tag` is the basename of the
 service or run/task command.
 Log rotation is controlled using the global `log` setting.
 **Example:**
    service log:prio:user.warn,tag:ntpd /sbin/ntpd pool.ntp.org -- NTP daemon
 Worth noting is that conditions is allowed for all these stanzas.  For a
 detailed description, see the [Conditions](conditions.md) document.
 Limitations
 -----------
 As of Finit v4 there are no limitations to where `.conf` settings can be
 placed.  Except for the system/global `rlimit`, which can only be set
 from `/etc/finit.conf`, since it is the first `.conf` file Finit reads.
 Originally, `/etc/finit.conf` was the only way to set up a Finit system.
 Today it is mainly used for bootstrap settings like system hostname,
 network bringup and system shutdown.  These can now also be set in any
 `.conf` file in `/etc/finit.d`.
 There is, however, nothing preventing you from having all configuration
 settings in `/etc/finit.conf`.
 > **Note:** The `/etc/finit.d` directory was previously the default
 >          Finit `runparts` directory.  Finit no longer has a default
 >          `runparts`, make sure to update your setup, or the finit
 >          configuration, accordingly.
 [run-parts(8)]: http://manpages.debian.org/cgi-bin/man.cgi?query=run-parts
@@ -13,13 +13,13 @@ By default Finit uses the following directories for configuration files:
 ```
 To enable a service one simply drops a small configuration file in the
-`/etc/finit.d/` directory.  This practice works will with systems that
+`/etc/finit.d/` directory.  This practice works with systems that
 keep disabled services elsewhere, or generates them as needed from some
 other tool.
-Disitributions, however, may want a clearer separation of enabled and
+Distributions, however, may want a clearer separation of enabled and
 available (installed but not enabled) services.  They may even want to
-customize the directories used, for brand labling or uniformity.
+customize the directories used, for brand labeling or uniformity.
 To that end Finit allows for a sub-directory `/etc/finit.d/available/`
 where installed but disabled services can reside.  Adding a symlink to a
@@ -34,6 +34,9 @@ build time:
 ./configure --with-rcsd=/etc/init.d --with-config=/etc/init.d/init.conf
 ```
 > **Note:** remember `--prefix` et al as well, the default is likely
 >           *not* what you want.  See the [build docs][1] for details.
 The resulting directory structure is depicted below.  Please notice how
 `/etc/finit.conf` now resides in the same sub-directory as a non-symlink
 `/etc/init.d/init.conf`:
@@ -42,10 +45,10 @@ The resulting directory structure is depicted below.  Please notice how
    /etc/
      |-- init.d/
      |    |-- available/      -- Regular (disabled) services
-	  |    |    |-- httpd.conf
+      |    |    |-- httpd.conf
-	  |    |    |-- ntpd.conf
+      |    |    |-- ntpd.conf
-	  |    |    `-- sshd.conf
+      |    |    `-- sshd.conf
-	  |    |-- sshd.conf       -- Symlink to available/sshd.conf
+      |    |-- sshd.conf       -- Symlink to available/sshd.conf
      |     `- init.conf       -- Bootstrap tasks and services
      :
 ```
@@ -73,3 +76,4 @@ requires the `available/` sub-directory.  Any non-symlink in the parent
 directory, here `/etc/init.d/`, will be considered a system override by
 `initctl`.
 [1]: build.md#configure
@@ -8,7 +8,7 @@ Hooks & Plugins
  * [Shutdown Hooks](#shutdown-hooks)
 Finit can be extended to add general functionality in the form of I/O
-monitors, built-in inetd services, or hook plugins.
+monitors, or hook plugins.
 The following sections detail existing plugins and hook points.  For
 more information, see the plugins listed below.
@@ -34,18 +34,12 @@ For your convenience a set of *optional* plugins are available:
 * *dbus.so*: Setup and start system message bus, D-Bus, at boot.
  _Optional plugin._
-* *echo.so*: RFC 862 plugin.  Start as inetd service, like time below.
+* *hotplug.so*: Setup and start either udev or mdev hotplug daemon, if
  available.
-* *chargen.so*: RFC 864 plugin.  Start as inetd service, like time below.
+* *rtc.so*: Restore and save system clock from/to RTC on boot/halt.
-* *daytime.so*: RFC 867 plugin.  Start as inetd service, like time below.
+* *modules-load.so*: Scans /etc/modules-load.d for modules to modprobe.
 * *discard.so*: RFC 863 plugin.  Start as inetd service, like time below.
 * *hwclock.so*: Restore and save system clock from/to RTC on
  startup/shutdown.
 * *initctl.so*: Extends finit with a traditional `initctl` functionality.
 * *netlink.so*: Listens to Linux kernel Netlink events for gateway and
  interfaces.  These events are then sent to the Finit service monitor
@@ -55,9 +49,6 @@ For your convenience a set of *optional* plugins are available:
 * *resolvconf.so*: Setup necessary files for `resolvconf` at startup.
  _Optional plugin._
 * *time.so*: RFC 868 (rdate) plugin.  Start as inetd service.  Useful
  for testing inetd filtering — BusyBox has an rdate (TCP) client.
 * *tty.so*: Watches `/dev`, using inotify, for new device nodes (TTY's)
  to start/stop getty consoles on them on demand.  Useful when plugging
  in a usb2serial converter to login to your embedded device.
@@ -109,7 +100,7 @@ Hooks
 * `HOOK_SHUTDOWN`: Called at shutdown/reboot, right before all
  services are sent `SIGTERM`
-Plugins like `initctl.so` and `tty.so` extend finit by acting on events,
+Plugins like `tty.so` extend finit by acting on events, they are called
-they are called I/O plugins and are called from the finit main loop when
+I/O plugins and are called from the finit main loop when `poll()`
-`poll()` detects an event.  See the source code for `plugins/*.c` for
+detects an event.  See the source code for `plugins/*.c` for more help
-more help and ideas.
+and ideas.
@@ -0,0 +1,55 @@
 Finit Signals
 =============
 Finit is often used on embedded and small Linux systems with BusyBox.
 Though Finit comes with its own tools for (poweroff, halt, reboot), for
 compatibility with the existing BusyBox toolset the following signals
 have been adopted:
 `SIGHUP`
 --------
 Same effect as `finit q`, `init q`, or `initctl reload`, reloads all
 *.conf files in `/etc/finit.d/`
 `SIGUSR1`
 ---------
 Calls shutdown hooks, including `HOOK_SHUTDOWN`, stopping all running
 processes, and unmounts all file systems.  Then tells kernel to halt.
 Most people these days want `SIGUSR2` though.
 SysV init and systemd use this to re-open their FIFO/D-Bus.
 `SIGUSR2`
 ---------
 Like SIGUSR1, but tell kernel to power-off the system, if ACPI or
 similar exists to actually do this.  If the kernel fails power-off,
 Finit falls back to halt.
 SysV init N/A, systemd dumps its internal state to log.
 `SIGTERM`
 ---------
 Like `SIGUSR1`, but tell kernel to reboot the system when done.
 SysV init N/A, systemd rexecutes itself.
 `SIGINT`
 --------
 Sent from kernel when the CTRL-ALT-DEL key combo is pressed.  SysV init
 and systemd default to reboot with `shutdown -r`.
 Finit currently forwards this to `SIGTERM`.
 `SIGPWR`
 --------
 Sent from a power daemon, like `powstatd(8)`, on changes to the
 UPS status.  Traditionally SysV init read /etc/powerstatus and
 acted on "OK", "FAIL", or "LOW" and then removed the file.  
 Finit currently forwards this to `SIGUSR2`.
@@ -1,4 +0,0 @@
 docsdir   := @docdir@/docs
 docs_DATA  = config.md conditions.md distro.md inetd.md plugins.md	\
 	     service.md signals.md svc-machine.png cmdline.md
 EXTRA_DIST = $(docs_DATA)
@@ -1,118 +0,0 @@
 Goals of Finit
 ==============
 The intent of finit is to monitor not just processes, but to supervise
 an entire system and the behavior of certain processes that declare
 themselves to be finit compliant.  Similar to launchd, the goal of
 finit is to be a replacement for:
 * init
 * inetd
 * crond
 * watchdogd
 A small and simple replacement, primarily for embedded systems, with a
 low dependency on external packages.  A compliant software is one that
 can run as a damon in the foreground.  If it can also touch its PID file
 after a reconfiguration (`initctl reload`), the Finit dependency system
 can also be used.
 Near Future
 -----------
 * Merge UDP redirect service uredir as an UDP inetd variant
 * Add `finit.conf` support for UPS notification (SIGPWR) to start a task
  using, e.g. <sys/power/{ok,fail,low}> conditions.  More info in sig.c
 * Add `finit.conf` support for ctrl-alt-delete (SIGINT) and kbrequest,
  i.e. KeyboardSignal, (SIGWINCH) behavior.  Using conditions to a task,
  e.g, <sys/key/ctrlaltdel> and <sys/key/signal> like SIGPWR handling.
 * Cron/At support, see below
 * Write man pages for finit and `finit.conf`, steal from the excellent
  `pimd` man pages ...
 * Add simple, *very* simple, `finit-simple.conf` example. To illustrate
  how close Finit3 still is to the original easy-to-use Finit0 :)
 General
 -------
 * Add support for timed shutdown in Finit, including cancelled shutdown,
  possibly using an at-job, see [crond section](#Crond) below
 * Add support for JSON output, or similar, from `initctl show`, e.g.
  `initctl show --json`
 * [Solaris SMF][] (Service Management Facility) has some interesting
  features that may be well worth looking into adopting:
         svcs enable -rt svc:/network/ssh:default
  That is: (r)esolve dependencies and only enable ssh (t)emporary
  in the default runlevel when networking is available.
 * `initctl add /sbin/service -n -- Service description`, for details
  see above [Solaris SMF][] featuer, issue #55 and issue #69,
  https://github.com/troglobit/finit/issues/69#issuecomment-287907610
 * Changing the name of a pidfile, `pid:[/path/]file.pid`, after a
  service has been started is not supported atm.  The previous name will
  not be (never) removed and the new name will not be created until the
  process has been stopped and started again.
 * PID files created in subdirectories to `/run` is not supported right
  now inotify listeners should be automatically created (and removed)
  when a subdirectory is added (or removed).
 Init
 ----
 Finit in itself is not SysV Init compatible, it doesn't use `/etc/rc.d`
 and `/etc/inet.d` scripts to boot the system.  However, a plausible way
 to achieve compatibility would be to add a plugin to finit which reads
 `/etc/inittab` to be able to start standard Linux systems.
 Inetd
 -----
 * Add support for throttling connections.
 * Optimize interface filtering by using socket filter.  The functions
  `inet_*_peek()` and `inetd_is_allowed()` used for interace filtering
  should be possible to rewrite as socket filters.
 * Optimize HTTP/HTTPS inetd connections by adding basic support for the
  `inetd` variant `redir http/tcp@eth0 nowait [2345] 127.0.0.1:8080`,
  which would reduce the overhead of spawn the web server on each HTTP
  connection, yet still provide a means of filtering access per iface.
 Crond
 -----
 Requirements are quite rudimentary, basic cron functionality, mainly
 system-level timed periodic tasks:
 * Periodically run a task, in a matching runlevel
 * Optionally run as non-root (`crontab -e` as operator)
 Proposed syntax:
    # Crontab
    cron @SPEC [LVLS] /path/to/cmd [ARGS] -- Optional descr
    # One-shot 'at' command
    at @YY-mm-ddTHH:MM [LVLS] /path/to/cmd [ARGS] -- Optional descr
 Notice the ISO date in the `at` notation.  The `cron @SPEC` could use
 are mo loose notation, e.g. `@hourly`, `@midnight`, `@daily`, `@weekly`,
 `@reboot`, etc.  The runlevels is extra filtering sugar.  E.g., if cron
 service is only allowed in runlevels two or three it will not start if
 system currently is in runlevel four.
 To run a command as another user the `.conf` file must have a that
 owner.  E.g., `/etc/finit.d/extra.conf` may be owned by operator and
 only hold `cron ...` lines.
 What would be extremely useful is if `initctl`, or a homegrown `at`,
 could support the basic functionality of the `at` command directly from
 the shell -- that way setting up one-time jobs would not entail
 re-reading `/etc/finit.conf`
 [Solaris SMF]: http://www.oracle.com/technetwork/articles/servers-storage-admin/intro-smf-basics-s11-1729181.html
@@ -1,38 +0,0 @@
 Tips & Tricks with the kernel cmdline
 =====================================
 This document summarizes the different boot parameters that can be
 passed on the Linux kernel command line.  Not just limited to Finit.
 * `debug`, or `--debug`  
    Enable debug mode.  The former syntax also enable kernel debug, and
    the latter only in Finit.  Debug messages are printed to the console
    until a syslog daemon has been started.
 * `init=/bin/sh`  
    Bypass system default init and tell kernel to start a shell.  Note,
 	this shell is very limited and does not support signals and has no
 	job control.  Recommend using, and modifying, `rescue` mode instead.
 * `panic=SEC`  
    By default the kernel does not reboot after a kernel panic.  This
    setting will cause a kernel reboot after SEC seconds.
 * `quiet`  
    Suppress kernel logging to console, except for warnings and errors.
 * `rescue`  
    Start Finit rescue mode; no network, no `fsck` of file systems in
    `/etc/fstab`, no `/etc/rc.local`, no `runparts`.  The configuration
    is read from `/etc/rescue.conf`, can be modified by the operator.
 * `single`, or `S`  
    Single user mode, runlevel 1, in Finit.  Useful to debug problems with
    the regular runlevel.  All services and TTYs in `[1]` will be started,
    so a `tty [1] @console nologin` configuration presents you with a
    root console without login.
 * `splash`  
    Display Finit splash screen with progress at bootstrap and shutdown.
 For more on kernel boot paramaters, see the man page `bootparam(7)`.
@@ -1,401 +0,0 @@
 Configuration
 =============
 * [Introduction](#introduction)
 * [Service Wrapper Scripts](#service-wrapper-scripts)
 * [Syntax](#syntax)
 * [Limitations](#limitations)
  * [/etc/finit.conf](#etcfinitconf)
  * [/etc/finit.d](#etcfinitd)
 Introduction
 ------------
 Finit can be configured using only the original `/etc/finit.conf` file
 or in combination with `/etc/finit.d/*.conf`.  Finit 3 can even start a
 system using only `/etc/finit.d/*.conf`, highly useful for package-based
 Linux distributions -- each package can provide its own "script" file.
 - `/etc/finit.conf`: main configuration file
 - `/etc/finit.d/*.conf`: snippets, usually one service per file
 Not all configuration directives are available in `/etc/finit.d/*.conf`
 and some directives are only available at bootstrap, runlevel `S`, see
 the section [Limitations](#limitations) below for details.
 To add a new service, simply drop a `.conf` file in `/etc/finit.d` and
 run `initctl reload`.  (It is also possible to `SIGHUP` to PID 1, or
 call `finit q`, but that has been deprecated with the `initctl` tool).
 Finit monitors all known active `.conf` files, so if you want to force
 a restart of any service you can simply touch its corresponding `.conf`
 file in `/etc/finit.d` and call `initctl reload`.  Finit handle any
 and all conditions and dependencies between services automatically.
 It is also possible to drop `.conf` files in `/etc/finit.d/available/`
 and use `initctl enable` to enable a service `.conf` file.  This may be
 useful in particular to Linux distributions that may want to install all
 files for a package and let the user decide when to enable a service.
 On `initctl reload` the following is checked for all services:
 - If a service's `.conf` file has been removed, or its conditions are no
  longer satisifed, the service is stopped.
 - If the file is modified, or a service it depends on has been reloaded,
  the service is reloaded (stopped and started).
 - If a new service is added it is automatically started — respecting
  runlevels and return values from any callbacks.
 For more info on the different states of a service, see the separate
 document [Finit Services](service.md).
 Service Wrapper Scripts
 -----------------------
 If your service requires to run additional commands, executed before the
 service is actually started, like the systemd `ExecStartPre`, you can
 use a wrapper shell script to start your service.
 The Finit service `.conf` file can be put into `/etc/finit.d/available`,
 so you can control the service using `initctl`.  Then use the path to
 the wrapper script in the Finit `.conf` service stanza.  The following
 example employs a wrapper script in `/etc/start.d`.
 **Example:**
 * `/etc/finit.d/available/program.conf`:
 ```conf
 service [235] <!> /etc/start.d/program -- Example Program
 ```
 * `/etc/start.d/program:`
 ```shell
 #!/bin/sh
 # Prepare the command line options
 OPTIONS="-u $(cat /etc/username)"
 # Execute the program
 exec /usr/bin/program $OPTIONS
 ```
 **Note:**, that the example sets `<!>` to denote that it doesn't support
  `SIGHUP`. That way Finit will stop/start such the service instead of
  sending SIGHUP at restart/reload.
 Syntax
 ------
 * `host <NAME>`, or `hostname <NAME>`  
  Set system hostname to NAME, unless `/etc/hostname` exists in which
  case the contents of that file is used.
 * `module <MODULE> [ARGS]`  
  Load a kernel module, with optional arguments
 * `network <PATH>`  
  Script or program to bring up networking, with optional arguments
 * `rlimit [hard|soft] RESOURCE <LIMIT|unlimited>` Set the hard or soft
  limit for a resource, or both if that argument is omitted.  `RESOURCE`
  is the lower-case `RLIMIT_` string constants from `setrlimit(2)`,
  without the prefix.  E.g. to set `RLIMIT_CPU`, use `cpu`.
  LIMIT is an integer that depends on the resource being modified, see
  the man page, or the kernel `/proc/PID/limits` file, for details.
  Finit versions before v3.1 used `infinity` for `unlimited`, which is
  still supported, albeit deprecated.
 ```shell
        # No process is allowed more than 8MB of address space
        rlimit hard as 8388608
        # Core dumps may be arbitrarily large
        rlimit soft core infinity
        # CPU limit for all services, soft & hard = 10 sec
        rlimit cpu 10
 ```
  `rlimit` can be set globally, in `/etc/finit.conf`, or locally for
  a set of task/run/services, in `/etc/finit.d/*.conf`.
 * `runlevel <N>`  
  N is the runlevel number 1-9, where 6 is reserved for reboot.  
  Default is 2.
 * `run [LVLS] <COND> /path/to/cmd ARGS -- Optional description`  
  One-shot command to run in sequence when entering a runlevel, with
  optional arguments and description.
  `run` commands are guaranteed to be completed before running the next
  command.  Highly useful if true serialization is needed.
 * `task [LVLS] <COND> /path/to/cmd ARGS -- Optional description`  
  One-shot like 'run', but starts in parallel with the next command.
  Both `run` and `task` commands are run in a shell, so pipes and
  redirects can be freely used:
 ```shell
        task [s] echo "foo" | cat >/tmp/bar
 ```
 * `service [LVLS] <COND> /path/to/daemon ARGS -- Optional description`  
  Service, or daemon, to be monitored and automatically restarted if it
  exits prematurely.  Please note that you often need to provide a
  `--foreground` or `--no-background` argument to most daemons to
  prevent them from forking off a sub-process in the background.
 ```shell
        service [2345] <svc/sbin/zebra> /sbin/ospfd -- OSPF daemon
 ```
  The `[2345]` is the runlevels `ospfd` is allowed to run in, they are
  optional and default to level 2-5 if left out.
  The `<...>` is the condition for starting `ospfd`.  In this example
  Finit waits for another service, `/sbin/zebra`, to have created its
  PID file in `/var/run/zebra.pid` before starting `ospfd`.
  Some services do not maintain a PID file and rather than patching each
  application Finit provides a workaround.  A `pid` keyword can be set
  to have Finit automatically create (when starting) and later remove
  (when stopping) the PID file.  The file is created in the `/var/run`
  directory using the `basename(1)` of the service.  The default can be
  modified with an optional argument:
        pid[:[/path/to/]filename[.pid]]
  For example, by adding `pid:/run/foo.pid` to the service `bar` that
  PID file will, not only be created and removed automatically, but also
  be used by the Finit condition subsystem.  So another service/run/task
  can depend on `<svc/foo>`.
  If a service `bar` *does* maintain a PID file, but using `foo.pid`, we
  can inform Finit of this by simplly prepending an `!` to the argument.
        pid:!/run/foo.pid
  Here Finit will *not* create/remove/touch the PID file, only use it
  for the condition handling instead of the default PID file name.
  For a detailed description of conditions, and how to debug them, see
  the [Finit Conditions](conditions.md) document.
 * `inetd service/proto[@iflist] <wait|nowait> [LVLS] /path/to/daemon args`  
  Launch a daemon when a client initiates a connection on an Internet
  port.  Available services are listed in the UNIX `/etc/services` file.
  Finit can filter access to from a list of interfaces, `@iflist`, per
  inetd service as well as listen to custom ports.
 ```shell
        inetd ftp/tcp	nowait	@root	/usr/sbin/uftpd -i -f
        inetd tftp/udp	wait	@root	/usr/sbin/uftpd -i -t
 ```
  The following example listens to port 2323 for telnet connections and
  only allows clients connecting from `eth0`:
 ```shell
        inetd 2323/tcp@eth0 nowait [2345] /sbin/telnetd -i -F
 ```
  The interface list, `@iflist`, is of the format `@iface,!iface,iface`,
  where a single `!` means to deny access.  Notice how interfaces are
  comma separated with no spaces.
  The `inetd` directive can also have ` -- Optional Description`, only
  Finit does not output this text on the console when launching inetd
  services.  Instead this text is sent to syslog and also shown by the
  `initctl` tool.  More on inetd below.
 * `runparts <DIR>`  
  Call [run-parts(8)][] on `DIR` to run start scripts.  All executable
  files, or scripts, in the directory are called, in alphabetic order.
  The scripts in this directory are executed at the very end of runlevel
  `S`, bootstrap.
  It can be beneficial to use `S01name`, `S02othername`, etc. if there
  is a dependency order between the scripts.  Symlinks to existing
  daemons can talso be used, but make sure they daemonize by default.
  Similar to the `/etc/rc.local` shell script, make sure that all your
  services and programs either terminate or start in the background or
  you will block Finit.
 * `include <CONF>`  
  Include another configuration file.  Absolute path required.
 * `log size:200k count:5`
  Log rotation for run/task/services using the `log` sub-option with
  redirection to a log file.  Global setting, applies to all services.
  The size can be given as bytes, without a specifier, or in `k`, `M`,
  or `G`, e.g. `size:10M`, or `size:3G`.  A value of `size:0` disables
  log rotation.  The default is `200k`.
  The count value is recommended to be between 1-5, with a default 5.
  Setting count to 0 means the logfile will be truncated when the MAX
  size limit is reached.
 * `tty [LVLS] <DEV> [BAUD] [noclear] [nowait] [nologin] [TERM]`  
  `tty [LVLS] <CMD> <ARGS> [noclear] [nowait]`  
  The first variant of this option uses the built-in getty on the given
  TTY device DEV, in the given runlevels.  The DEV may be the special
  keyword `@console`, which is very useful on embedded systems.  Default
  baud rate is `38400`.
  **Example:**
 ```conf
        tty [12345] /dev/ttyAMA0 115200 noclear vt220
 ```
  The second `tty` syntax variant is for using an external getty, like
  agetty or the BusyBox getty.
  By default both variants *clear* the TTY and *wait* for the user to
  press enter before starting getty.
  **Example:**
 ```conf
        tty [12345] /sbin/getty  -L 115200 /dev/ttyAMA0 vt100
        tty [12345] /sbin/agetty -L ttyAMA0 115200 vt100 nowait
 ```
  The `noclear` option disables clearing the TTY after each session.
  Clearing the TTY when a user logs out is usually preferable.
  The `nowait` option disables the `press Enter to activate console`
  message before actually starting the getty program.  On small and
  embedded systems running multiple unused getty wastes both memory
  and CPU cycles, so `wait` is the preferred default.
  The `nologin` option disables getty and `/bin/login`, and gives the
  user a root (login) shell on the given TTY `<DEV>` immediately.
  Needless to say, this is a rather insecure option, but can be very
  useful for developer builds, during board bringup, or similar.
  Notice the ordering, the `TERM` option to the built-in getty must be
  the last argument.
  Embedded systems may want to enable automatic `DEV` by supplying the
  special `@console` device.  This works regardless weather the system
  uses `ttyS0`, `ttyAMA0`, `ttyMXC0`, or anything else.  Finit figures
  it out by querying sysfs: `/sys/class/tty/console/active`.
  **Example:**
 ```conf
        tty [12345] @console 115200 noclear vt220
 ```
  On really bare bones systems Finit offers a fallback shell, which
  should not be enabled on production systems since.  This because it
  may give a user root access without having to log in.  However, for
  bringup and system debugging it can come in handy:
 ```shell
        configure --enable-fallback-shell
 ```
  One can also use the `service` stanza to start a stand-alone shell:
 ```conf
        service [12345] /bin/sh -l
 ```
 When running <kbd>make install</kbd> no default `/etc/finit.conf` will
 be installed since system requirements differ too much.  Try out the
 Debian 6.0 example `/usr/share/doc/finit/finit.conf` configuration that
 is capable of service monitoring SSH, sysklogd, gdm and getty!
 Every `run`, `task`, `service`, or `inetd` can also list the privileges
 the `/path/to/cmd` should be executed with.  Simply prefix the path with
 `[@USR[:GRP]]` like this:
 ```shell
    run [2345] @joe:users /usr/bin/logger "Hello world"
 ```
 For multiple instances of the same command, e.g. a DHCP client or
 multiple web servers, add `:ID` somewhere between the `run`, `task`,
 `service` keyword and the command, like this:
 ```shell
    service :1 [2345] /sbin/httpd -f -h /http -p 80   -- Web server
    service :2 [2345] /sbin/httpd -f -h /http -p 8080 -- Old web server
 ```
 Without the `:ID` to the service the latter will overwrite the former
 and only the old web server would be started and supervised.
 The `run`, `task`, `service`, or `inetd` stanzas also allow the keyword
 `log` to redirect `stderr` and `stdout` of the application to a file or
 syslog using the native `logit` tool.  The full syntax is:
    log:/path/to/file
    log:prio:facility.level,tag:ident
    log:null
    log
 Default `prio` is `daemon.info` and default `tag` is the basename of the
 service or run/task command.
 Log rotation is controlled using the global `log` setting.
 **Example:**
    service log:prio:user.warn,tag:ntpd /sbin/ntpd pool.ntp.org -- NTP daemon
 Worth noting is that conditions is allowed for all these stanzas.  For a
 detailed description, see the [Conditions](conditions.md) document.
 Limitations
 -----------
 To understand the limitations of `finit.conf` vs `finit.d` it is useful
 to picture the different phases of the system: bootstrap, runtime, and
 shutdown.
 ### /etc/finit.conf
 This file used to be the only way to set up and boot a Finit system.
 Today it is mainly used for pre-runtime settings like system hostname,
 network bringup and shutdown:
 - `host`, only at bootstrap, (runlevel `S`)
 - `mknod`, only at bootstrap
 - `network`, only at bootstrap
 - `runparts`, only at bootstrap
 - `include`
 - `log`, global setting
 - `shutdown`
 - `runlevel`, only at bootstrap
 - ... and all configuration stanzas from `/etc/finit.d` below
 ### /etc/finit.d
 Support for per-service `.conf` files in `/etc/finit.d` was added in
 v3.0 to handle changes of the system configuration at runtime.  As of
 v3.1 `finit.conf` is also handled at runtime, except of course for any
 stanza that only runs at bootstrap.  However, a `/etc/finit.d/*.conf`
 does *not support* the above `finit.conf` settings described above, only
 the following:
 - `module`, but only at bootstrap
 - `service`
 - `task`
 - `run`
 - `inetd`
 - `rlimit`
 - `tty`
 **NOTE:** The `/etc/finit.d` directory was previously the default Finit
  `runparts` directory.  Finit no longer has a default `runparts`, make
  sure to update your setup, or the finit configuration, accordingly.
 [run-parts(8)]: http://manpages.debian.org/cgi-bin/man.cgi?query=run-parts
@@ -1,125 +0,0 @@
 Internet Super Server
 =====================
 Inetd
 -----
 A built-in *Internet Super Server* support was added in Finit v1.12 and
 v1.13, along with an internal `time` inetd service, RFC 868 (rdate).
 The latter is supplied as a plugin to illustrate how simple it is to
 extend finit with more internal inetd services.  Today more built-in
 services are available.
 > Please note, not all UNIX daemons are prepared to run as inetd services.
 > In the example below `sshd` also need the command line argument `-i`.
 The inetd support in finit is quite advanced.  Not only does it launch
 services on demand, it can do so on custom ports and also filter inbound
 traffic using a poor man's [TCP wrappers][].  The syntax is very similar
 to the traditional `/etc/inetd.conf`, yet keeping with the style of
 Finit:
 ```shell
    # Launch SSH on demand, in runlevels 2-5 as root
    inetd ssh/tcp            nowait [2345] @root:root /usr/sbin/sshd -i
 ```
 A more advanced example is listed below, please note the *incompatible
 syntax change* that was made between Finit v1.12 and v1.13 to support
 deny filters:
 ```shell
    # Start sshd if inbound connection on eth0, port 222, or
    # inbound on eth1, port 22.  Ignore on other interfaces.
    inetd 222/tcp@eth0       nowait [2345] /usr/sbin/sshd -i
    inetd ssh/tcp@eth1,eth1  nowait [2345] /usr/sbin/sshd -i
 ```
 If `eth0` is your Internet interface you may want to avoid using the
 default port.  To run ssh on port 222, and all others on port 22:
 ```shell
    inetd 222/tcp@eth0       nowait [2345] /usr/sbin/sshd -i
    inetd ssh/tcp@*,!eth0    nowait [2345] /usr/sbin/sshd -i
 ```
 Compared to Finit v1.12 you must *explicitly deny* access from `eth0`!
 To protect against looping attacks, the inetd server will refuse UDP
 service if the reply port corresponds to any internal service.  Similar
 to how the FreeBSD inetd operates.
 **Internal Services**
 Like the original `inetd`, Finit has a few standard services built-in.
 They are realized as plugins to provide a simple means of testing the
 inetd functionality stand-alone.  But this also provides both a useful
 network testing/availability, as well as a rudimentary time server for
 `rdate` clients.
 - echo
 - chargen
 - daytime
 - discard
 - time
 For security reasons they are all disabled by default and have to be
 enabled with both the `configure` script and a special `inetd` stanza in
 the `finit.conf` or `finit.d/*.conf` like this:
 ```shell
    inetd echo/udp           wait [2345] internal
    inetd echo/tcp         nowait [2345] internal
    inetd chargen/udp        wait [2345] internal
    inetd chargen/tcp      nowait [2345] internal
    inetd daytime/udp        wait [2345] internal
    inetd daytime/tcp      nowait [2345] internal
    inetd discard/udp        wait [2345] internal
    inetd discard/tcp      nowait [2345] internal
    inetd time/udp           wait [2345] internal
    inetd time/tcp         nowait [2345] internal
 ```
 Then call `rdate` from a remote machine (or use localhost):
 ```shell
    rdate -p  <IP>
    rdate -up <IP>
 ```
 Or `echoping` to reach the echo service:
 ```shell
    echoping -v  <IP>
    echoping -uv <IP>
 ```
 Or `echoping -d` to reach the discard service:
 ```shell
    echoping -dv  <IP>
    echoping -duv <IP>
 ```
 Or `echoping -c` to reach the chargen service:
 ```shell
    echoping -cv  <IP>
    echoping -cuv <IP>
 ```
 If you use `time/udp` you must use the standard rdate implementation and
 then call it with `rdate -up` to connect using UDP.  Without the `-p`
 argument rdate will try to set the system clock.  Please note that rdate
 has been deprecated by the NTP protocol and this plugin should only be
 used for testing or environments where NTP for some reason is blocked.
 Also, remember the UNIX year 2038 bug, or in the case of RFC 868 (and
 some NTP implementations), year 2036!
 **Note:** There is currently no verification that the same port is used
  more than once.  So a standard `inetd http/tcp` service will clash
  with an ssh entry for the same port `inetd 80/tcp` …
 [TCP Wrappers]:     https://en.wikipedia.org/wiki/TCP_Wrapper
@@ -1,36 +0,0 @@
 Finit Signals
 =============
 Finit is often used on embedded and small Linux systems with BusyBox.
 Though Finit comes with its own tools for (poweroff, halt, reboot), for
 compatibility with the existing BusyBox toolset the following signals
 have been adopted:
 * `SIGHUP`  
  Same effect as `finit q`, `init q`, or `initctl reload`, reloads all
  *.conf files in `/etc/finit.d/`
 * `SIGUSR1`  
  Calls shutdown hooks, including `HOOK_SHUTDOWN`, stopping all running
  processes, and unmounts all file systems.  Then tells kernel to halt.
  Most people these days want `SIGUSR2` though.
  SysV init and systemd use this to re-open their FIFO/D-Bus.
 * `SIGUSR2`  
  Like SIGUSR1, but tell kernel to power-off the system, if ACPI
  or similar exists to actually do this.  If the kernel fails
  power-off, Finit falls back to halt.
  SysV init N/A, systemd dumps its internal state to log.
 * `SIGTERM`  
  Like `SIGUSR1`, but tell kernel to reboot the system when done.
  SysV init N/A, systemd rexecutes itself.
 * `SIGINT`  
  Sent from kernel when the CTRL-ALT-DEL key combo is pressed.
  SysV init and systemd default to reboot with `shutdown -r`.  
  Finit currently forwards this to `SIGTERM`.
 * `SIGPWR`  
  Sent from a power daemon, like `powstatd(8)`, on changes to the
  UPS status.  Traditionally SysV init read /etc/powerstatus and
  acted on "OK", "FAIL", or "LOW" and then removed the file.  
  Finit currently forwards this to `SIGUSR2`.
		`@@ -0,0 +1,3 @@`
							`# These are supported funding model platforms`

							`github: [troglobit]`
		`@@ -1 +1 @@`
			`service [2345] <svc/sbin/syslogd> /usr/sbin/crond -f -S -c /etc/crontabs -- Cron daemon`				`service [2345] <pid/syslogd> env:-/etc/conf.d/crond crond -f -S $CRON_OPTS -- Cron daemon`
`@@ -1,2 +1,2 @@`
	`# Start SSH daemon as soon as basic networking comes up`	`# Start SSH daemon as soon as basic networking comes up`
	`service [2345] <net/lo/up> /usr/sbin/dropbear -R -F -p 22 -- Dropbear SSH daemon`	`service [2345] env:-/etc/conf.d/dropbear dropbear -R -F $DROPBEAR_OPTS -- Dropbear SSH daemon`
`@@ -1,2 +1,2 @@`
	`# Oneshot task to run once at bootstrap`	`# Oneshot task to run once at bootstrap`
	`task [S] zcat /etc/keymap/se.bmap.gz \| loadkmap -- Loading keymap`	`task [S] env:/etc/conf.d/loadkmap zcat $KEYMAP \| loadkmap -- Loading keymap`
`@@ -1,2 +1,2 @@`
	`# Start klogd as soon as possible, should always run`	`# Start klogd as soon as possible, after syslogd, should always run`
	`service [S12345] /sbin/klogd -n -- Kernel log daemon`	`service [S12345] <pid/syslogd> env:-/etc/conf.d/klogd klogd -n $KLOGD_OPTS -- Kernel log daemon`
		`@@ -1 +1 @@`
			`service [2345] /usr/sbin/lxdm -- Lightweight Login Manager`				`service [2345] lxdm -- Lightweight Login Manager`
`@@ -1,2 +1,2 @@`
	`# Silly Busybox ntpd has no option to use syslog when running in foreground`	`# Busybox ntpd has no option to use syslog when running in foreground`
	`service [2345] log <svc/sbin/syslogd> /usr/sbin/ntpd -n -N -p pool.ntp.org -- NTP daemon`	`service [2345] <pid/syslogd> env:-/etc/conf.d/ntpd log ntpd -n $NTPD_OPTS -- NTP daemon`
		`@@ -0,0 +1,2 @@`
							`# Start syslogd as soon as possible, should always run`
							`service [S12345] env:-/etc/conf.d/syslog syslogd -n $SYSLOGD_OPTS -- Syslog daemon`
		`@@ -1,2 +0,0 @@`
			`# Start syslogd as soon as possible, should always run`
			`service [S12345] /sbin/syslogd -n -- Syslog daemon`
		`@@ -0,0 +1 @@`
							`service [S123456789] env:-/etc/conf.d/watchdog watchdog $WATCHDOG_OPTS $WATCHDOG_DEV -- System watchdog`