Bump version for v4.1 release

Signed-off-by: Joachim Wiberg <troglobit@gmail.com>

ChangeLog.md

@@ -4,8 +4,8 @@ Change Log
 All relevant changes are documented in this file.
 
 
-[4.1][UNRELEASED]
+[4.1][] - 2021-06-06
------------------
+--------------------
 
 Bug fix release.  Also disables handlers for `SIGINT` and `SIGPWR`, a
 new set of `sys` conditions are instead generated which can be used to
@@ -36,6 +36,9 @@ trigger external programs.
   falls back to an unauthenticated `/bin/sh`
 * Dropped (broken) support for multiple consoles.  Finit now follows
   the default console selected by the kernel, `/dev/console`
+* Dropped signal handlers for SIGSTOP/TSTP and SIGCONT
+* Added support for `\n`, in addition to `\r`, in "Please press Enter"
+  prompt before starting getty
 * Finit no longer parses `/proc/cmdline` for its options.  Instead all
   options are by default now read from `argv[]`, like a normal program,
   this is also what the kernel does by default.  Please note, this may
@@ -45,6 +48,9 @@ trigger external programs.
   `rtc.so`, `urandom.so`, you may also want to disable `hotplug.so`.
   They are all enabled by default, as in Finit 4.0, but may be moved
   to external tools or entries in `finit.conf` in Finit 5.0
+* Added support for reading `PRETTY_NAME` from `/etc/os-release` to use
+  as heading in progress output, unless `--with-heading=GREET` is used.
+* Added manual pages for finit(8), initctl(8), and finit.conf(5)
 
 ### Fixes
 * Stricter interface name validation in netlink plugin, modeled after
@@ -66,6 +72,11 @@ trigger external programs.
 * Fix `/etc/fstab` parser to properly check for 'ro' to not remount the
   root filesystem at boot.  The wrong field was read, so a root mounted
   by an initramfs, or by lxc for a container, had their root remounted
+* Fix SIGCHLD handler, `waitpd()` may be interrupted by a signal
+* Reset `starting` flag of services being stopped.  When a service
+  is started and then stopped before it has created its pid file,
+  it could be left forever in the stopping state, unless we reset
+  the starting flag.
 * Fix #170: detect loss of default route when interfaces go down.  This
   emulates the missing kernel netlink message to remove the condition
   net/default/route to allow stopping dependent services

Makefile.am

@@ -1,5 +1,5 @@
 ACLOCAL_AMFLAGS    = -I m4
-SUBDIRS            = plugins src test
+SUBDIRS            = man plugins src test
 doc_DATA           = README.md LICENSE contrib/finit.conf
 EXTRA_DIST         = README.md LICENSE ChangeLog.md contrib/finit.conf
 

README.md

@@ -22,19 +22,19 @@
 Introduction
 ------------
 
-Finit is a simple alternative to [SysV init][4] and [systemd][6].  It
+Fast init for Linux systems.  Reverse engineered from the [EeePC
-was reverse engineered from the [EeePC fastinit][] over ten years ago
+fastinit][] over ten years ago by [Claudio Matsuoka][] — "gaps filled
-by [Claudio Matsuoka][] — "gaps filled with frog DNA …"
+with frog DNA …"
 
 ![Alpine screenshot](img/finit4-screenshot.png)  
 *Figure 1: Screenshot showing Finit booting [Alpine Linux](https://www.alpinelinux.org/).*
 
 Features include:
 
-  * Runlevels
+  * Runlevels, defined per service
-  * One-shot tasks, daemons, or SysV init scripts
+  * One-shot tasks, services (daemons), or [SysV init][4] start/stop scripts
-  * Runparts and rc.local
+  * Runparts and `/etc/rc.local` support
-  * Process supervision
+  * Process supervision similar to [systemd][]
   * Sourcing environment files
   * Conditions for network/process/custom dependencies
   * Pre/Post script actions
@@ -581,8 +581,6 @@ and proposed extensions.
 [3]:  http://smarden.org/runit/
 [4]:  http://en.wikipedia.org/wiki/Init
 [5]:  http://en.wikipedia.org/wiki/Runlevel
-[6]:  https://www.freedesktop.org/wiki/Software/systemd/
-[9]:  https://github.com/troglobit/troglos
 [RFC862]:           https://tools.ietf.org/html/rfc862
 [RFC863]:           https://tools.ietf.org/html/rfc863
 [RFC864]:           https://tools.ietf.org/html/rfc864

configure.ac

@@ -1,4 +1,4 @@
-AC_INIT(Finit, 4.1-rc2, https://github.com/troglobit/finit/issues, finit, https://troglobit.com/finit.html)
+AC_INIT(Finit, 4.1, https://github.com/troglobit/finit/issues, finit, https://troglobit.com/finit.html)
 AC_CONFIG_AUX_DIR(aux)
 AM_INIT_AUTOMAKE([1.11 foreign dist-xz subdir-objects])
 AM_SILENT_RULES([yes])
@@ -11,6 +11,7 @@ AC_CONFIG_FILES([Makefile
 	contrib/debian/Makefile contrib/debian/finit.d/Makefile contrib/debian/finit.d/available/Makefile
 	contrib/void/Makefile   contrib/void/finit.d/Makefile   contrib/void/finit.d/available/Makefile
 	doc/Makefile
+	man/Makefile
 	plugins/Makefile
 	src/Makefile
 	test/test.env
@@ -86,7 +87,7 @@ AC_PLUGIN([urandom],       [yes], [Setup and save random seed at boot/shutdown])
 
 # Check for extra arguments or packages
 AC_ARG_WITH(heading,
-        AS_HELP_STRING([--with-heading=GREET], [Display GREET instead of Finit version at boot]),
+        AS_HELP_STRING([--with-heading=GREET], [Heading for boot progress. Default: PRETTY_NAME from /etc/os-release, fallback to "Finit vX.YY"]),
 	[heading=$withval], [heading=yes])
 
 AC_ARG_WITH(config,
@@ -170,9 +171,8 @@ AS_IF([test "x$with_sysconfig" != "xno"], [
 			    [System environment, default /etc/default & /etc/conf.d])])])
 
 AS_IF([test "x$with_heading" != "xno"], [
-	AS_IF([test "x$heading" = "xyes"], [
+	AS_IF([test "x$heading" = "xyes"], [heading=""])
-		heading="$PACKAGE_NAME v$PACKAGE_VERSION"])])
+	AC_DEFINE_UNQUOTED(INIT_OSHEADING, "$heading", [Displayed by Finit at boot, defaults to /etc/os-release PRETTY_NAME])])
-AC_DEFINE_UNQUOTED(INIT_HEADING, "$heading", [Displayed by Finit at boot])
 
 AS_IF([test "x$with_hostname" != "xno"], [
 	AS_IF([test "x$hostname" = "xyes"], [
@@ -222,6 +222,9 @@ AC_DEFINE_UNQUOTED(RESCUE_CONF, "$rescue_conf", [Finit rescue mode .conf])
 AC_EXPAND_DIR(sample_conf, "$libdir/finit/sample.conf")
 AC_DEFINE_UNQUOTED(SAMPLE_CONF, "$sample_conf", [Finit sameple.conf for initctl create])
 
+AS_IF([test "$heading" = ""],   [heading="<DEFAULT>"])
+AS_IF([test "$heading" = "no"], [heading="<NONE>"])
+
 # Generate all files
 AC_OUTPUT
 

contrib/alpine/Makefile.am

@@ -1,5 +1,5 @@
 SUBDIRS    = finit.d
 docsdir   := @docdir@/contrib/alpine
-docs_DATA  = README.md finit.conf alpine-release build.sh install.sh rc.local
+docs_DATA  = README.md finit.conf build.sh install.sh rc.local
 EXTRA_DIST = $(docs_DATA)
 

contrib/alpine/alpine-release

@@ -1 +0,0 @@
-3.6.2

contrib/alpine/build.sh

@@ -18,7 +18,7 @@ PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig:/usr/local/lib/pkgconfig ./configure	\
 		 --sysconfdir=/etc		--localstatedir=/var		\
 		 --enable-dbus-plugin		--enable-x11-common-plugin	\
 		 --enable-alsa-utils-plugin	--with-watchdog			\
-		 --with-heading="Alpine Linux"  --with-keventd
+		 --with-keventd
 
 echo
 echo "*** Building ..."

contrib/alpine/install.sh

@@ -8,7 +8,8 @@ if [ "x`id -u`" != "x0" ]; then
 fi
 
 # Adjust base directory
-if [ -e alpine-release ]; then
+grep -q alpine Makefile 2>/dev/null
+if [ $? -eq 0 ]; then
     cd ../..
 elif [ ! -e configure.ac ]; then
     echo "*** Please run this script from the Finit base directory."

contrib/debian/Makefile.am

@@ -1,4 +1,4 @@
 SUBDIRS    = finit.d
 docsdir   := @docdir@/contrib/debian
-docs_DATA  = README.md finit.conf os-release build.sh install.sh
+docs_DATA  = README.md finit.conf build.sh install.sh
 EXTRA_DIST = $(docs_DATA)

contrib/debian/README.md

@@ -47,12 +47,13 @@ comands to `initctl`, followed by `reload` to activate your changes.
 You can also use a standard [/etc/rc.local](rc.local) for one-shot tasks
 and initialization like keyboard language etc.
 
-If you want to use the X Window system, `sudo apt install elogind`
+> **NOTE:** X Window system, you may need to `sudo apt install elogind`
-(Bullseye and later).  Followed by `initctl reload` (enabled by default)
+> (Bullseye and later), followed by `initctl reload` to activate it (it
-and logout/login again.  The elogind daemon ensures a regular non-root
+> is enabled by default), and logout/login again.  The elogind daemon
-user can start and interact with an X session, otherwise keyboard and
+> ensures a regular non-root user can start and interact with an X
-mouse won't work.  When you're happy, you can enable the lightdm.conf,
+> session, otherwise keyboard and mouse won't work.  When you're happy,
-change the default runlevel to 3, and presto! you have a desktop again.
+> you can enable the lightdm.conf, change the default runlevel to 3, and
+> presto!  you have a desktop again.
 
 
 Have fun!  

contrib/debian/build.sh

@@ -26,8 +26,7 @@ echo
     --sysconfdir=/etc                 --localstatedir=/var		\
     --enable-dbus-plugin              --enable-x11-common-plugin	\
     --enable-alsa-utils-plugin	      --with-keventd			\
-    --with-random-seed=/var/lib/urandom/random-seed			\
+    --with-random-seed=/var/lib/urandom/random-seed
-    --with-heading="Debian GNU/Linux"
 
 if [ $? -ne 0 ]; then
     echo

contrib/debian/finit.d/Makefile.am

@@ -1,9 +1,9 @@
 SUBDIRS    = available
 docsdir   := @docdir@/contrib/debian/finit.d
-d_LINKS    = acpid.conf apparmor.conf avahi-demon.conf		\
+d_LINKS    = acpid.conf apparmor.conf avahi-daemon.conf		\
 	     bluetooth.conf console-setup.conf elogind.conf 	\
 	     getty.conf keyboard-setup.conf modules.conf	\
-	     rsyslogd.conf sshd.conf
+	     plymouth-quit.conf rsyslogd.conf sshd.conf
 
 install-exec-hook:
 	@$(MKDIR_P) $(DESTDIR)$(docsdir)/available

contrib/debian/finit.d/available/Makefile.am

@@ -2,6 +2,7 @@ docsdir   := @docdir@/contrib/debian/finit.d/available
 docs_DATA  = acpid.conf apparmor.conf avahi-daemon.conf bluetooth.conf	\
 	     console-setup.conf elogind.conf getty.conf			\
 	     keyboard-setup.conf lightdm.conf modules.conf sntpd.conf	\
-	     rsyslogd.conf sshd.conf syslogd.conf xdm.conf
+	     plymouth-quit.conf rsyslogd.conf sshd.conf syslogd.conf	\
+	     xdm.conf
 EXTRA_DIST = $(docs_DATA)
 

contrib/debian/finit.d/available/plymouth-quit.conf

@@ -0,0 +1,2 @@
+# Need to stop plymouth, or it'll block stdin on tty1
+task [S] /usr/bin/plymouth quit -- Stopping Plymouth Boot Screen

contrib/debian/install.sh

@@ -8,7 +8,7 @@ if [ "x`id -u`" != "x0" ]; then
 fi
 
 # Adjust base directory
-grep -q Debian os-release 2>/dev/null
+grep -q debian Makefile 2>/dev/null
 if [ $? -eq 0 ]; then
     cd ../..
 elif [ ! -e configure.ac ]; then

contrib/debian/os-release

@@ -1,8 +0,0 @@
-PRETTY_NAME="Debian GNU/Linux 8 (jessie)"
-NAME="Debian GNU/Linux"
-VERSION_ID="8"
-VERSION="8 (jessie)"
-ID=debian
-HOME_URL="http://www.debian.org/"
-SUPPORT_URL="http://www.debian.org/support"
-BUG_REPORT_URL="https://bugs.debian.org/"

contrib/void/Makefile.am

@@ -1,4 +1,4 @@
 SUBDIRS    = finit.d
 docsdir   := @docdir@/contrib/void
-docs_DATA  = README.md finit.conf build.sh install.sh rc.local xbps
+docs_DATA  = README.md finit.conf build.sh install.sh rc.local
 EXTRA_DIST = $(docs_DATA)

contrib/void/build.sh

@@ -18,7 +18,7 @@ PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig:/usr/local/lib/pkgconfig ./configure	\
 		 --sysconfdir=/etc              --localstatedir=/var		\
                  --enable-dbus-plugin           --enable-x11-common-plugin	\
 		 --enable-alsa-utils-plugin	--with-watchdog			\
-		 --with-heading="Void Linux"    --with-keventd
+		 --with-keventd
 
 echo
 echo "*** Building ..."

contrib/void/install.sh

@@ -8,7 +8,8 @@ if [ "x`id -u`" != "x0" ]; then
 fi
 
 # Adjust base directory
-if [ -e xbps ]; then
+grep -q void Makefile 2>/dev/null
+if [ $? -eq 0 ]; then
     cd ../..
 elif [ ! -e configure.ac ]; then
     echo "*** Please run this script from the Finit base directory."

doc/TODO.md

@@ -21,11 +21,17 @@ Some of these are also registered in the issue tracker on GitHub.
 * Allow running as non-pid1 => read .conf and RCSD form cmdline
 * Add `finit.conf` support for UPS notification (SIGPWR) to start a task
   using, e.g. <sys/power/{ok,fail,low}> conditions.  More info in sig.c
+
+  As of Finit v4.1 SIGPWR generates <sys/power/fail> condition and it
+  is up to a task to check why and take appropriate action.
 * Add `finit.conf` support for ctrl-alt-delete (SIGINT) and kbrequest,
   i.e. KeyboardSignal, (SIGWINCH) behavior.  Using conditions to a task,
   e.g, <sys/key/ctrlaltdel> and <sys/key/signal> like SIGPWR handling.
-* Write man pages for finit and `finit.conf`, steal from the excellent
+
-  `pimd` man pages ...
+  As of Finit v4.1 SIGINT generates <sys/key/ctrlaltdel>, but there is
+  no check if the signal actually originates from the kernel.  To get
+  this verification, a new libuEv release is needed.  As of June 6 -21
+  that functionality is not yet released.
 
 
 Initctl

doc/build.md

@@ -83,8 +83,7 @@ Then configure, build and install:
 ```shell
 $ ./configure --prefix=/usr                 --exec-prefix=         \
               --sysconfdir=/etc             --localstatedir=/var   \
-			  --with-keventd                --with-watchdog        \
+			  --with-keventd                --with-watchdog
-              --with-heading="Alpine Linux" --with-hostname=alpine
 $ make
 .
 .

doc/config.md

@@ -43,13 +43,13 @@ Not all configuration directives are available in `/etc/finit.d/*.conf`
 and some directives are only available at [bootstrap][], runlevel `S`,
 see the section [Limitations](#limitations) below for details.
 
-To add a new service, simply drop a `.conf` file in `/etc/finit.d` and
+To add a new service, drop a `.conf` file in `/etc/finit.d` and run
-run `initctl reload`.  (It is also possible to `SIGHUP` to PID 1, or
+`initctl reload`.  (It is also possible to `SIGHUP` to PID 1, or call
-call `finit q`, but that has been deprecated with the `initctl` tool).
+`finit q`, but that has been deprecated with the `initctl` tool).  Finit
-Finit monitors all known active `.conf` files, so if you want to force
+monitors all known active `.conf` files, so if you want to force a
-a restart of any service you can simply touch its corresponding `.conf`
+restart of any service you can touch its corresponding `.conf` file in
-file in `/etc/finit.d` and call `initctl reload`.  Finit handle any
+`/etc/finit.d` and call `initctl reload`.  Finit handle any and all
-and all conditions and dependencies between services automatically.
+conditions and dependencies between services automatically.
 
 It is also possible to drop `.conf` files in `/etc/finit.d/available/`
 and use `initctl enable` to enable a service `.conf` file.  This may be
@@ -154,7 +154,7 @@ Top-level group configuration.
     cgroup system cpu.weight:9800
 
 Adding an extra cgroup `maint/` will require you to adjust the weight of
-the above three.  We leave `init/` and `user /` as-is reducing weight of
+the above three.  We leave `init/` and `user/` as-is reducing weight of
 `system/` to 9700.
 
     cgroup system cpu.weight:9700
@@ -184,7 +184,7 @@ The latter form also allows per-stanza limits on the form:
 
 Notice the comma separation and the `mem.` exception to the rule: every
 cgroup setting maps directly to cgroup v2 syntax.  I.e., `cpu.max` maps
-to the file `/sys/fs/cgroup/maint/foo/cpu.max`.  There is not filtering,
+to the file `/sys/fs/cgroup/maint/foo/cpu.max`.  There is no filtering,
 except for expanding the shorthand `mem.` to `memory.`, if the file is
 not available, either the cgroup controller is not available in your
 Linux kernel, or the name is misspelled.
@@ -473,8 +473,9 @@ size limit is reached.
   `tty [LVLS] <COND> [notty] [rescue]`
 
 The first variant of this option uses the built-in getty on the given
-TTY device DEV, in the given runlevels.  The DEV may be the special
+TTY device DEV, in the given runlevels.  DEV may be the special keyword
-keyword `@console`, or `console`, useful on embedded systems.
+`@console`, which is expanded from `/sys/class/tty/console/active`,
+useful on embedded systems.
 
 The default baud rate is 0, i.e., keep kernel default.
 
@@ -555,8 +556,8 @@ One can also use the `service` stanza to start a stand-alone shell:
 ### Non-privileged Services
 
 Every `run`, `task`, or `service` can also list the privileges the
-`/path/to/cmd` should be executed with.  Simply prefix the path with
+`/path/to/cmd` should be executed with.  Prefix the command with
-`[@USR[:GRP]]` like this:
+`@USR[:GRP]`, group is optional, like this:
 
     run [2345] @joe:users logger "Hello world"
 
@@ -654,8 +655,9 @@ Limitations
 -----------
 
 As of Finit v4 there are no limitations to where `.conf` settings can be
-placed.  Except for the system/global `rlimit`, which can only be set
+placed.  Except for the system/global `rlimit` and `cgroup` top-level
-from `/etc/finit.conf`, since it is the first `.conf` file Finit reads.
+group declarations, which can only be set from `/etc/finit.conf`, since
+it is the first `.conf` file Finit reads.
 
 Originally, `/etc/finit.conf` was the only way to set up a Finit system.
 Today it is mainly used for bootstrap settings like system hostname,

man/.gitignore

@@ -0,0 +1,2 @@
+Makefile
+Makefile.in

man/Makefile.am

@@ -0,0 +1,2 @@
+dist_man8_MANS = finit.8 initctl.8
+dist_man5_MANS = finit.conf.5

man/finit.8

@@ -0,0 +1,178 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.Dd June 6, 2021
+.\" Please adjust this date whenever revising the manpage.
+.Dt FINIT 8 SMM
+.Os Linux
+.Sh NAME
+.Nm finit
+.Nd Fast init for Linux systems
+.Sh SYNOPSIS
+.Nm /sbin/finit
+.Op finit.status_style=classic
+.Op finit.show_status=[on,off]
+.Op finit.debug
+.Op rescue | recover
+.Op single | S
+.Nm /sbin/telinit
+.Op Fl hv
+.Op q | Q | 0-9
+.Sh DESCRIPTION
+Fast init for Linux systems.  Reverse engineered from the EeePC
+fastinit, 10+ years ago by Claudio Matsuoka, "gaps filled with frog
+DNA ...".  Focus is on small and embedded systems, although Finit is
+fully usable on server and desktop systems as well.
+.Pp
+Features include:
+.Bl -bullet -width 1n -compact
+.It
+Runlevels, defined per service
+.It
+One-shot tasks, services (daemons), or SysV init start/stop scripts
+.It
+Runparts and
+.Pa /etc/rc.local
+support
+.It
+Process supervision similar to
+.Xr systemd 8
+.It
+Sourcing environment files
+.It
+Conditions for network/process/custom dependencies
+.It
+Pre/Post script actions
+.It
+Tooling to enable/disable services
+.It
+Built-in getty
+.It
+Built-in watchdog, with support for hand-over to
+.Lk https://troglobit.com/watchdogd.html watchdogd
+.It
+Built-in support for Debian/BusyBox
+.Pa /etc/network/interfaces
+.It
+Cgroups v2, both configuration and monitoring in `initctl top`
+.It
+Plugin support for customization
+.It
+Proper rescue mode with bundled `sulogin` for protected maintenance shell
+.El
+.Sh BOOTING
+.Pp
+Before laucnhing services, the system needs to be bootstrapped.  This
+involves mounting all filesystems (not already mounted by an initramfs)
+in
+.Pa /etc/fstab ,
+ensuring that necessary filesystems like:
+.Pa /dev ,
+.Pa /proc ,
+.Pa /sys ,
+and
+.Pa /run
+are available and can provide the system with the services required.
+.Pp
+With that out of the way, a set of plugins take over:
+.Pp
+.Bl -tag -width bootmisc.so -offset indent
+.It Cm bootmisc.so
+Cleans up stale files from previous boots and default directories are
+created in tmpfs filesystems
+.It Cm modprobe.so
+Probes kernel modules required by the system
+.It Cm procps.so
+Set kernel variables from
+.Pa /etc/sysctl.conf
+et al
+.El
+.Pp
+When the plugins are done, finit reads
+.Pa /etc/finit.conf
+and all other enabled services in
+.Pa /etc/finit.d/* .
+First all services, run/tasks in runlevel S (bootStrap) are started,
+When all run/tasks have completed, Finit changes to the configured
+runlevel (default 2), Processes are started in parallel, in dependency
+order according to their conditions.
+.Pp
+When all services and run/tasks have been started, the console progress
+is disabled and all configured getty services are started.
+.Sh CONDITIONS
+The condition subysystem in Finit was initially created to track PID
+files of daemons.  If service/task B requires service A to have started,
+Finit waits for the PID file of service A to be created/updated before
+it starts service B.  Conversely, if service A is stopped and its PID
+file removed, service B is also stopped.
+.Pp
+The following condition families are availble today:
+.Pp
+.Bl -tag -width pid -offset indent
+.It Cm net
+Linux netlink events, e.g. net/route/default, net/eth0/up, and
+net/et0/running
+.It Cm pid
+PID files basd on the service declaration
+.Cm name:id ,
+gives the condition pid/name:id
+.It Cm sys
+System conditions, e.g. sys/key/ctrlaltdel and sys/pwr/fail
+.It Cm usr
+User conditions, assert and deassert using
+.Cm initctl cond [set|clr] foo
+.El
+.Sh SIGNALS
+PID 1 is the only process that by default blocks all signals.  Finit
+allows for the following signals to control operation, but recommends
+instead using the
+.Xr initctl 8
+tool.
+.Pp
+.Bl -tag -width TERM
+.It HUP
+Tell
+.Nm
+to reload its configuration file(s), same as
+.Cm initctl reload
+.It USR1
+Restart API
+.Cm ( initctl )
+socket.
+.It USR2
+Tell
+.Nm
+to perform a system shutdown, same as
+.Cm initctl poweroff
+.It TERM
+Like SIGUSR2 but performs a reboot, same as
+.Cm initctl reboot
+.It INT
+Sent from kernel when Ctrl-Alt-Del is pressed (on the console), this
+asserts the sys/key/ctrlaltdel condition, which can be used to start
+tasks or services
+.It PWR
+Sent from a a power daemon on changes to UPS status, Finit asserts
+the sys/pwr/fail condition
+.El
+.Sh FILES
+.Bl -tag -width /etc/finit.d/available/*.conf -compact
+.It Pa /etc/finit.conf
+Main configuration file
+.It Pa /etc/finit.d/*.conf
+Static service definitions
+.It Pa /etc/finit.d/available/*.conf
+Available services
+.It Pa /etc/finit.d/enabled/*.conf
+Symlinks from available
+.It Pa /run/finit/
+Runtime files, including the condition subsystem
+.El
+.Sh SEE ALSO
+.Xr finit.conf 5
+.Xr initctl 8
+.Sh AUTHORS
+.Nm
+was conceived and reverse engineered by Claudio Matsuoka.  Since v1.0,
+maintained by Joachim Wiberg, with contributions by many others.

man/finit.conf.5

@@ -0,0 +1,814 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.Dd Oct 17, 2020
+.Dt FINIT.CONF 5 SMM
+.Os Linux
+.Sh NAME
+.Nm finit.conf
+.Nd Finit configuration file format
+.Sh SYNOPSIS
+.Nm /etc/finit.conf
+.Nm /etc/finit.d/*.conf
+.Nm /etc/finit.d/available/*.conf
+.Sh DESCRIPTION
+.Nm finit
+can be configured using only the original
+.Pa /etc/finit.conf
+file or in combination with
+.Pa /etc/finit.d/*.conf .
+Useful for package-based Linux distributions \(em each package can
+provide its own "script" file.
+.Pp
+.Bl -tag -width /etc/finit.d/*.conf -offset indent -compact
+.It Pa /etc/finit.conf
+Main configuration file
+.It Pa /etc/finit.d/*.conf
+Snippets, usually one service per file
+.El
+.Pp
+Not all configuration directives are available in
+.Pa /etc/finit.d/*.conf
+and some directives are only available at bootstrap, runlevel
+.Cm S ,
+see the section
+.Sx Limitations
+below for details.
+.Sh FILES
+.Bl -tag -width /etc/finit.d/available/*.conf -compact
+.It Pa /etc/finit.conf
+Main configuration file
+.It Pa /etc/finit.d/*.conf
+Static service definitions
+.It Pa /etc/finit.d/available/*.conf
+Available services
+.It Pa /etc/finit.d/enabled/*.conf
+Enabled services, symlinks from available
+.El
+.Sh FILE FORMAT
+Lines starting with `#' are ignored. Note that end-of-line comments are
+NOT supported, comments must be on a line of their own.
+.Pp
+A configuration stanza must be on a single (long) line and
+.Em cannot
+be broken up in multiple lines by use of a backslash as the last
+character.
+.Sh DIRECTIVES
+This section lists all supported configuration directives.  There also exist
+deprecated directives, see the Markdown documentation for details on these.
+.Pp
+.Bl -tag -width 1n
+.It Cm rlimit Oo hard|soft Oc Ar RESOURCE Aq LIMIT | unlimited
+.Pp
+Set the hard or soft limit for a resource, or both if that argument is
+omitted.
+.Ar RESOURCE
+is the lower-case
+.Cm RLIMIT_
+string constants from
+.Xr setrlimit 2 ,
+without prefix.  E.g. to set
+.Cm RLIMIT_CPU ,
+use
+.Cm cpu .
+.Pp
+.Ar LIMIT
+is an integer that depends on the resource being modified, see
+the man page, or the kernel
+.Pa /proc/PID/limits
+file, for details.
+Finit versions before v3.1 used
+.Cm infinity
+for
+.Cm unlimited ,
+which is still supported, albeit deprecated.
+.Bd -unfilled -offset indent
+# No process is allowed more than 8MB of address space
+rlimit hard as 8388608
+
+# Core dumps may be arbitrarily large
+rlimit soft core infinity
+
+# CPU limit for all services, soft & hard = 10 sec
+rlimit cpu 10
+.Ed
+.Pp
+.Cm rlimit
+can be set globally, in
+.Pa /etc/finit.conf ,
+or locally per each
+.Pa /etc/finit.d/*.conf
+read.  I.e., a set of task/run/service stanzas can share the same
+rlimits if they are in the same .conf.
+.It Cm runlevel Aq N
+The system runlevel to go to after bootstrap (S) has completed.
+.Cm N
+is the runlevel number 0-9, where 6 is reserved for reboot and 0 for
+halt.  All other can be used by operating system administrators.
+Default: 2
+.Pp
+.Sy Note:
+only read and executed in runlevel S (bootstrap).
+.It Cm run Oo LVLS Oc Ao COND Ac Ar /path/to/cmd ARGS Op -- Optional description
+One-shot command to run in sequence when entering a runlevel, with
+optional arguments and description.
+.Pp  
+.Cm run
+commands are guaranteed to be completed before running the next
+command.  Highly useful if true serialization is needed.  Usually
+only used in the bootstrap (S) runlevel.
+.Pp
+.Cm Aq COND
+conditions are described in
+.Xr finit 8 ,
+see also the
+.Sx Examples
+section below.
+.It Cm task Oo LVLS Oc Ao COND Ac Ar /path/to/cmd ARGS Op -- Optional description
+One-shot like
+.Cm run ,
+but starts in parallel with the next command.
+.Pp  
+Both
+.Cm run
+and
+.Cm task
+commands are run in a shell, so pipes and redirects can be freely used:
+.Bd -unfilled -offset indent
+task [s] echo "foo" | cat >/tmp/bar
+.Ed
+.It Cm sysv Oo LVLS Oc Ao COND Ac Ar /path/to/script ARGS Op -- Optional description
+Similar to
+.Cm task
+is the
+.Cm sysv
+stanza, which can be used to call SysV style start/stop scripts.  The
+primary intention for this command is to be able to re-use much of
+existing setup and init scripts in Linux distributions.
+.Pp  
+When entering an allowed runlevel, Finit calls
+.Cm init-script start ,
+when entering a disallowed runlevel, Finit calls
+.Cm init-script stop ,
+and if the Finit .conf, where the
+.Cm sysv
+stanza is declared, is modified, Finit calls
+.Cm init-script restart
+on
+.Cm initctl reload .
+Similar to how
+.Cm service
+stanzas work.
+.Pp
+Forking services started with
+.Cm sysv
+scripts can be monitored by Finit by declaring the PID file to look for:
+.Bd -unfilled -offset indent
+sysv pid:!/path/to/pidfile.pid /path/to/script ...
+.Ed
+.Pp
+The leading '!' is to prevent Finit from managing the PID file, which is
+the default behavior for the
+.Cm pid:
+command modifier.
+.It Cm service Oo LVLS Oc Ao COND Ac Ar /path/to/daemon ARGS Op -- Optional description
+Service, or daemon, to be monitored and automatically restarted if it
+exits prematurely.  Finit tries to restart services that die 10 times
+before giving up, then you have to restart it manually:
+.Cm initctl restart NAME
+.Pp  
+For daemons that support it, we recommend appending
+.Cm --foreground , --no-background , -n , -F ,
+or similar command line argument to prevent them from forking off a
+sub-process in the background.  This is the most reliable way to monitor
+a service.
+.Pp
+However, not all daemons support running in the foreground, or they may
+start logging to the foreground as well, these are called forking
+services and are supported using the same syntax as forking
+.Cm sysv
+services, using the
+.Cm pid:!/path/to/pidfile.pid
+command modifier syntax.
+.Pp
+.Sy Example: in the case of
+.Cm ospfd
+(below), we omit the
+.Cm -d
+flag (daemonize) to prevent it from forking to the background:
+.Bd -unfilled -offset indent
+service [2345] <pid/zebra> /sbin/ospfd -- OSPF daemon
+.Ed
+.Cm [2345]
+denote the runlevels
+.Cm ospfd
+is allowed to run in, they are optional and default to runlevel 2-5 if
+omitted.
+.Pp
+.Cm <pid/zebra>
+is the condition for starting
+.Cm ospfd .
+In this example Finit waits for another service,
+.Cm zebra ,
+to have created its PID file in
+.Pa /var/run/quagga/zebra.pid
+before starting
+.Cm ospfd .
+Finit watches *all* files in
+.Pa /var/run ,
+for each file named
+.Cm *.pid ,
+.Cm */pid ,
+Finit opens it and find the matching
+.Cm NAME:ID
+using the PID.
+.Pp
+Some services do not maintain a PID file and rather than patching each
+application Finit provides a workaround.  A
+.Cm pid
+modifier keyword can be set to have Finit automatically create (when
+starting) and later remove (when stopping) the PID file.  The file is
+created in the
+.Pa /var/run
+directory using the
+.Xr basename 3
+of the service.  The full syntax of the
+.Cm pid
+modifier is:
+.Bd -unfilled -offset indent
+pid[:[!][/path/to/]filename[.pid]]
+.Ed
+.Pp
+For example, by adding
+.Cm pid:/run/foo.pid
+to the service
+.Cm /sbin/bar ,
+that PID file will, not only be created and removed automatically, but
+also be used by the Finit condition subsystem.  So a service/run/task
+can depend on the
+.Cm <pid/bar>
+condition.
+.Pp
+If a service should not be automatically started, it can be configured
+as manual with the
+.Cm manual:yes
+command modifier.  The service can then be started at any time by
+running
+.Cm initctl start NAME
+.Pp
+The name of a service, shown by the
+.Cm initctl
+tool, defaults to the basename of the service executable. It can be
+changed with the
+.Cm name:foo
+command modifier.
+.Pp
+When stopping a service (run/task/sysv/service), either manually or when
+moving to another runlevel, Finit starts by sending SIGTERM, to allow
+the process to shut down gracefully.  If the process has not been
+collected within 3 seconds, Finit sends SIGKILL.  To halt the process
+using a different signal, use the command modifier
+.Cm halt:SIGNAL ,
+e.g.,
+.Cm halt:SIGPWR .
+To change the delay between your halt signal and KILL, use the command
+modifier
+.Cm kill:SEC ,
+e.g.,
+.Cm kill:10
+to wait 10 seconds before sending SIGKILL.
+.Pp
+Services support the
+.Cm pre:script
+and
+.Cm post:script
+command actions as well.  These run as the same
+.Cm @USER:GROUP
+as the service itself, with any
+.Cm env:file
+sourced.  The scripts must use an absolute path, but are executed from
+the
+.Cm $HOME
+of the given user.  The scripts are not called with any argument
+(currently), but both get the
+.Cm SERVICE_IDENT=foo
+environment variable set.  Here
+.Cm foo
+denotes the identity of the service, which if there are multiple
+services named
+.Cm foo ,
+may be
+.Cm foo:1 ,
+or any unique identifier specified in the .conf file.  The
+.cm post:script
+is called with an additional set of environment variables:
+.Bl -tag -offset indent -width 1n
+.It Cm EXIT_CODE=[exited,signal]
+set to one of
+.Cm exited
+or
+.Cm signal
+.It Cm EXIT_STATUS=[num,SIGNAME]
+set to one of exit status code from the program, if it exited normally,
+or the signal name (HUP, TERM, etc.) if it exited due to signal
+.El
+.Pp
+The scripts have a default execution time of 3 seconds before they are
+SIGKILLed, this can be adjusted using the
+.Cm kill:SEC
+modifier syntax.
+.Pp
+.Sy Note:
+the
+.Cm pre:script
+.Em must
+be idempotent, because a service can transition between READY and HALTED
+states any number of times before going to RUNNING.
+.It Cm runparts Aq DIR
+Call
+.Xr run-parts 8
+on
+.Cm DIR
+to run start scripts.  All executable files, or scripts, in the
+directory are called, in alphabetic order.  The scripts in this
+directory are executed at the very end of bootstrap, runlevel S.
+.Pp
+It can be beneficial to use
+.Cm S01name ,
+.Cm S02othername ,
+etc. if there is a dependency order between the scripts.  Symlinks to
+existing daemons can talso be used, but make sure they daemonize by
+default.
+.Pp
+Similar to the
+.Pa /etc/rc.local
+shell script, make sure that all your services and programs either
+terminate or start in the background or you will block Finit.
+.Sy Note:
+only read and executed in runlevel S (bootstrap).
+.It Cm include Aq CONF
+Include another configuration file.  Absolute path required.
+.It Cm log size:BYTES count:NUM
+Log rotation for run/task/services using the
+.Cm log
+command modifier with redirection to a log file.  Global setting,
+applies to all services.
+.Pp
+The size can be given as bytes, without a specifier, or in `k`, `M`,
+or `G`, e.g.
+.Cm size:10M ,
+or
+.Cm size:3G .
+A value of
+.Cm size:0
+disables log rotation.  The default is
+.Cm size:200k .
+.Pp
+The count value is recommended to be between 1-5, with a default 5.
+Setting count to 0 means the logfile will be truncated when the MAX
+size limit is reached.
+.It Cm tty Oo LVLS Oc Ao COND Ac Ar DEV Oo BAUD Oc Oo noclear Oc Oo nowait Oc Oo nologin Oc Oo TERM Oc
+This form of the
+.Cm tty
+stanza uses the built-in getty on the given TTY device
+.Ar DEV ,
+in the given runlevels.
+.Ar DEV may be the special keyword
+.Cm @console ,
+or `console`, which is expanded from `/sys/class/tty/console/active`,
+useful on embedded systems.
+.Pp
+The default baud rate is 0, i.e., keep kernel default.
+.Pp
+The `tty` stanza inherits runlevel, condition (and other feature)
+parsing from the `service` stanza.  So TTYs can run in one or many
+runlevels and depend on any condition supported by Finit.  This is
+useful e.g. to depend on `<pid/elogind>` before starting a TTY.
+.Bd -unfilled -offset indent
+tty [12345] /dev/ttyAMA0 115200 noclear vt220
+.Ed
+.It Cm tty Oo LVLS Oc Ao COND Ac Ar CMD DEV Oo noclear Oc Oo nowait Oc
+This form of the
+.Cm tty
+stanza is for using an external getty, like agetty or the BusyBox getty.
+.Pp
+By default, these first two syntax variants
+.Em clear
+the TTY and
+.Em wait
+for the user to press enter before starting getty.
+.Bd -unfilled -offset indent
+tty [12345] /sbin/getty  -L 115200 /dev/ttyAMA0 vt100
+tty [12345] /sbin/agetty -L ttyAMA0 115200 vt100 nowait
+.Ed
+.Pp
+The
+.Cm noclear
+option disables clearing the TTY after each session.  Clearing the TTY
+when a user logs out is usually preferable.
+.Pp  
+The
+.Cm nowait
+option disables the
+.Cm Please press Enter to activate console
+message before actually starting the getty program.  On small and
+embedded systems running multiple unused getty wastes both memory and
+CPU cycles, so `wait` is the preferred default.
+.Pp
+The
+.Cm nologin
+option disables getty and
+.Pa /bin/login ,
+and gives the user a root (login) shell on the given TTY
+.Cm DEV
+immediately.  Needless to say, this is a rather insecure option, but can
+be very useful for developer builds, during board bringup, or similar.
+.Pp
+Notice the ordering, the
+.Cm TERM
+option to the built-in getty must be the last argument.
+.Pp
+Embedded systems may want to enable automatic `DEV` by supplying the
+special
+.Cm @console
+device.  This works regardless weather the system uses
+.Cm ttyS0 , ttyAMA0 ,  ttyMXC0 ,
+or anything else.  Finit figures it out by querying sysfs:
+.Pa /sys/class/tty/console/active .
+The speed can be omitted to keep the kernel default.
+.Pp
+Most systems get by fine by just using `console`, which will evaluate
+to
+.Pa /dev/console .
+If you have to use
+.Cm @console
+to get any output, you may have some issue with your kernel config.
+.Bd -unfilled -offset indent
+tty [12345] @console noclear vt220
+.Ed
+.Pp
+On really bare bones systems, or for board bringup, Finit can give you a
+shell prompt as soon as bootstrap is done, without opening any device
+node:
+.Bd -unfilled -offset indent
+tty [12345789] notty
+.Ed
+.Pp
+This should of course not be enabled on production systems.  Because it
+may give a user root access without having to log in.  However, for
+board bringup and system debugging it can come in handy.
+.Pp
+One can also use the
+.Cm service
+stanza to start a stand-alone shell:
+.Bd -unfilled -offset indent
+service [12345] /bin/sh -l
+.Ed
+.Pp
+.It Cm tty Oo LVLS Oc Ao COND Ac Oo notty Oc Oo rescue Oc
+The third
+.Cm tty
+form is for board bringup and the
+.Cm rescue
+boot mode.  No device node is required in this variant, the same output
+that the kernel uses is reused for stdio.  If the
+.Cm rescue
+option is omitted, a shell is started.  The flags
+.Cm nologin , noclear ,
+and
+.Cm nowait
+are implied.   If the
+.Cm rescue
+option is set the bundled
+.Pa /libexec/finit/sulogin
+is started to present a bare-bones root login prompt.  If the root
+(uid:0, gid:0) user does not have a password set, no rescue is possible.
+.El
+.Sh COMMAND MODIFIERS
+The run/task/tty/service/sysv stanzas take modifiers, or options, to
+control their behavior.  This section lists them with their limitations.
+All modifiers must be placed between the stanza and its command.
+.Bl -tag -width 1n
+.It Cm @user:group
+Every
+.Cm run , task ,
+or
+.Cm service
+can also list the privileges the
+.Cm /path/to/cmd
+should be executed with.  Prefix the command with
+.Cm @USR[:GRP] ,
+group is optional, like this:
+.Bd -unfilled -offset indent
+run [2345] @joe:users logger "Hello world"
+.Ed
+.Pp
+For multiple instances of the same command, e.g. a DHCP client or
+multiple web servers, add
+.Cm :ID
+somewhere between the
+.Cm run , task , service
+keyword and the command, like this:
+.Bd -unfilled -offset indent
+service :80  [2345] httpd -f -h /http -p 80   -- Web server
+service :8080[2345] httpd -f -h /http -p 8080 -- Old web server
+.Ed
+.Pp
+Without the
+.Cm :ID
+to the service the latter will overwrite the former and only the old web
+server would be started and supervised.
+.It Cm log:/path/to/file
+Redirect stdout/stderr of a command to the given log file.  See the
+global log directive, above, for details on log rotation.
+.It Cm log:console
+Redirect stdout/stderr of a command to
+.Pa /dev/console ,
+only use this for debugging or bringup.
+.It Cm log:null
+Redirect stdout/stderr of a command to
+.Pa /dev/null .
+.It Cm log:prio:facility.level,tag:ident
+Redirect stdout/stderr of a command to syslog using the given priority
+and tag identity.
+.Bd -unfilled -offset indent
+service log:prio:user.warn,tag:ntpd /sbin/ntpd pool.ntp.org -- NTP daemon
+.Ed
+.It Cm log
+Default
+.Cm prio
+is
+.Cm daemon.info
+and the default
+.Cm tag
+identity is the basename of the service or run/task command.
+.El
+.Sh RESCUE MODE
+Finit supports a rescue mode which is activated by the
+.Cm rescue
+option on the kernel command line.  The rescue mode comes in two
+flavors:
+.Em traditional
+and
+.Em fallback .
+.Ss Traditional
+This is what most users expect.  A very early maintenance login prompt,
+served by the bundled
+.Pa /libexec/finit/sulogin
+program, or the standard
+.Cm sulogin
+from util-linux or BusyBox is searched for in the UNIX default
+.Cm $PATH .
+If a successful login is made, or the user exits (Ctrl-D), the rescue
+mode is ended and the system boots up normally.
+.Pp
+.Sy Note:
+if the user (UID 0 and GID 0) does not have a password, or
+.Em the account is locked ,
+the user is presented with a password-less prompt:
+.Cm "Press enter to enter maintenance mode." ,
+which opens up a root shell.
+.Ss Fallback
+If no
+.Cm sulogin
+program is found, Finit tries to bring up as much of its own
+functionality as possible, yet limiting many aspects, meaning; no
+network, no`fsck` of file systems in
+.Pa /etc/fstab ,
+no
+.Pa /etc/rc.local ,
+no
+.Cm runparts ,
+and most plugins are skipped (except those that provide functionality
+for the condition subsystem).
+.Pp
+Instead of reading
+.Pa /etc/finit.conf
+et al, system configuration is read from
+.Pa /lib/finit/rescue.conf ,
+which can be freely modified by the system administrator.
+.Pp
+The bundled default `rescue.conf` contains nothing more than:
+.Bd -unfilled -offset indent
+runlevel 1
+tty [12345] rescue
+.Ed
+.Pp
+The
+.Cm tty
+has the
+.Cm rescue
+option set, which works similar to the board bring-up tty option
+.Cm notty .
+The major difference being that `sulogin` is started to query for
+root/admin password.  If
+.Cm sulogin
+is not found,
+.Cm rescue
+behaves like
+.Cm notty
+and gives a plain root shell prompt.
+.Pp
+If Finit cannot find
+.Pa /lib/finit/rescue.conf
+it defaults to:
+.Bd -unfilled -offset indent
+tty [12345] rescue
+.Ed
+.Pp
+There is no way to exit the
+.Em fallback
+rescue mode.
+.Sh SERVICE ENVIRONMENT
+Finit supports sourcing environment variables from
+.Pa /etc/default/* ,
+or similar.  This is a common pattern from SysV init scripts, where the
+start/stop script is a generic script for the given service,
+.Cm foo ,
+and the options for the service are sourced from the file
+.Pa /etc/default/foo .
+Like this:
+.Bd -unfilled -offset indent
+/etc/default/foo:
+
+    FOO_OPTIONS=--extra-arg="bar" -s -x
+
+/etc/finit.conf:
+
+    service [2345] env:-/etc/default/foo foo -n $FOO_OPTIONS -- Example foo daemon
+.Ed
+.Pp
+Here the service
+.Cm foo
+is started with
+.Op Fl -n ,
+to make sure it runs in the foreground, and the with the options found
+in the environment file.  With the
+.Cm ps
+command we can see that the process is started with:
+.Bd -unfilled -offset indent
+foo -n --extra-arg=bar -s -x
+.Ed
+.Pp
+.Sy Note:
+the leading `-` determines if Finit should treat a missing environment
+file as blocking the start of the service or not.  When `-` is used, a
+missing environment file does
+.Em not
+block the start.
+.Sh SERVICE WRAPPER SCRIPTS
+If your service requires to run additional commands, executed before the
+service is actually started, like the systemd `ExecStartPre`, you can
+use a wrapper shell script to start your service.
+.Pp
+The Finit service
+.Cm .conf
+file can be put into
+.Pa /etc/finit.d/available ,
+so you can control the service using
+.Cm initctl .
+Then use the path to the wrapper script in the Finit
+.Cm .conf
+service stanza.  The following example employs a wrapper script in
+.Pa /etc/start.d .
+.Bd -unfilled
+/etc/finit.d/available/program.conf:
+
+    service [235] <!> /etc/start.d/program -- Example Program
+
+/etc/start.d/program:
+
+    #!/bin/sh
+    # Prepare the command line options
+    OPTIONS="-u $(cat /etc/username)"
+
+    # Execute the program
+    exec /usr/bin/program $OPTIONS
+.Ed
+.Pp
+.Sy Note:
+the example sets
+.Cm <!>
+to denote that it doesn't support SIGHUP.  That way Finit will
+stop/start the service instead of sending SIGHUP at restart/reload
+events.
+.Sh CGROUPS
+There are three major cgroup configuration directives:
+.Pp
+.Bl -enum -offset indent -compact
+.It
+Global top-level group: init, system, user, or a custom group
+.It
+Selecting a top-level group for a set of run/task/services
+.It
+Per run/task/service limits
+.El
+.Pp
+Top-level group configuration.
+.Bd -unfilled -offset indent
+# Top-level cgroups and their default settings.  All groups mandatory
+# but more can be added, max 8 groups in total currently.  The cgroup
+# 'root' is also available, reserved for RT processes.  Settings are
+# as-is, only one shorthand 'mem.' exists, other than that it's the
+# cgroup v2 controller default names.
+cgroup init   cpu.weight:100
+cgroup user   cpu.weight:100
+cgroup system cpu.weight:9800
+.Ed
+.Pp
+Adding an extra cgroup
+.Cm maint/
+will require you to adjust the weight of the above three.  We leave
+.Cm init/
+and
+.Cm user/
+as-is reducing weight of
+.Cm system/
+to 9700.
+.Bd -unfilled -offset indent
+cgroup system cpu.weight:9700
+
+# Example extra cgroup 'maint'
+cgroup maint  cpu.weight:100
+.Ed
+.Pp
+By default, the
+.Cm system/
+cgroup is selected for almost everything.  The
+.Cm init/
+cgroup is reserved for PID 1 itself and its closest relatives.  The
+.Cm user/
+cgroup is for local TTY logins spawned by getty.
+.Pp
+To select a different top-level cgroup, e.g.
+.Cm maint/ ,
+one can either define it for a group of run/task/service directives in a
+.Cm .conf
+or per each stanza:
+.Bd -unfilled -offset indent
+cgroup.maint
+service [...] <...> /path/to/foo args -- description
+service [...] <...> /path/to/bar args -- description
+.Ed
+.Pp
+or
+.Bd -unfilled -offset indent
+service [...] <...> cgroup.maint /path/to/foo args -- description
+.Ed
+.Pp
+The latter form also allows per-stanza limits on the form:
+.Bd -unfilled -offset indent
+service [...] <...> cgroup.maint:cpu.max:10000,mem.max:655360 /path/to/foo args -- description
+.Ed
+.Pp
+Notice the comma separation and the
+.Cm mem.
+exception to the rule: every cgroup setting maps directly to cgroup v2
+syntax.  I.e.,
+.Cm cpu.max
+maps to the file
+.Pm /sys/fs/cgroup/maint/foo/cpu.max .
+There is no filtering, except for expanding the shorthand
+.Cm mem.
+to
+.Cm memory. ,
+if the file is not available, either the cgroup controller is not
+available in your Linux kernel, or the name is misspelled.
+.Pp
+Linux cgroups and details surrounding values are not explained in the
+Finit documentation.  The Linux admin-guide cover this well:
+.Lk https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html
+.Sh LIMITATIONS
+As of Finit v4 there are no limitations to where
+.Cm .conf
+settings can be placed.  Except for the system/global
+.Cm rlimit
+and
+.Cm cgroup
+top-level group declarations, which can only be set from
+.Pa /etc/finit.conf ,
+since it is the first
+.Cm .conf
+file Finit reads.
+.Pp
+Originally,
+.Pp /etc/finit.conf
+was the only way to set up a Finit system.  Today it is mainly used for
+bootstrap settings like system hostname, early module loading for
+watchdogd, network bringup and system shutdown.  These can now also be
+set in any
+.Cm .conf
+file in
+.Pa /etc/finit.d .
+.Pp
+There is, however, nothing preventing you from having all configuration
+settings in
+.Pa /etc/finit.conf .
+.Sh SEE ALSO
+.Xr finit 8 ,
+.Xr initctl 8
+.Sh AUTHORS
+.Nm finit
+was conceived and reverse engineered by Claudio Matsuoka.  Since v1.0,
+maintained by Joachim Wiberg, with contributions by many others.

man/initctl.8

@@ -0,0 +1,175 @@
+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.Dd June 6, 2021
+.\" Please adjust this date whenever revising the manpage.
+.Dt INITCTL 8 SMM
+.Os Linux
+.Sh NAME
+.Nm initctl
+.Nd Control tool for Finit
+.Sh SYNOPSIS
+.Nm /sbin/initctl
+.Op Fl bcfhlpqtv
+.Op COMMAND
+.Sh DESCRIPTION
+.Nm
+is the official tool for interacting with
+.Xr finit 8 .
+It comes with functions for showing status, querying health of services,
+as well as editing, enabling and disabling services.
+.Sh OPTIONS
+This program follows the usual UNIX command line syntax, with long
+options starting with two dashes (`-').  The options are as follows:
+.Bl -tag -width Ds
+.It Fl b, -batch
+Batch mode, no screen size probing.
+.It Fl c, -create
+Create missing paths (and files) as needed.  Useful with the edit command.
+.It Fl f, -force
+Ignore missing files and arguments, never prompt.
+.It Fl h, -help
+Show built-in help text.
+.It Fl 1, -once
+Only one lap in commands like top.
+.It Fl p, -plain
+Use plain table headings, no ANSI control characters.
+.It Fl q, -quiet
+Silent, only return status of command.
+.It Fl t, -no-heading
+Skip table headings.
+.It Fl v, -verbose
+Verbose output, where applicable.
+.El
+.Sh COMMANDS
+.Bl -tag -width Ds
+.It Nm Ar debug
+Toggle finit (daemon) debug to
+.Pa /dev/console
+.It Nm Ar help
+Show built-in help text
+.It Nm Ar version
+Show Finit (daemon) version
+.It Nm Ar ls | list
+List all
+.Cm *.conf
+files in
+.Pa /etc/finit.d
+.It Nm Ar create Ar CONF
+Create
+.Cm .conf
+in
+.Pa /etc/finit.d/available
+.It Nm Ar delete Ar CONF
+Delete
+.Cm .conf
+in
+.Pa /etc/finit.d/available
+.It Nm Ar show Ar CONF
+Show
+.Cm .conf
+in
+.Pa /etc/finit.d/available
+.It Nm Ar edit Ar CONF
+Edit
+.Cm .conf
+in
+.Pa /etc/finit.d/available
+.It Nm Ar touch Ar CONF
+Change (mark as modified)
+.Cm .conf
+in
+.Pa /etc/finit.d/available ,
+like
+.Ar edit
+this tells
+.Nm finit
+that a configuration has been changed and is a candidate to be restarted
+(or SIGHUP'ed) on
+.Cm initctl reload
+.It Nm Ar enable Ar CONF
+Enable
+.Cm .conf
+in
+.Pa /etc/finit.d/available ,
+i.e., add symlink in
+.Pa /etc/finit.d/enabled
+.It Nm Ar disable Ar CONF
+Disable
+.Cm .conf
+in
+.Pa /etc/finit.d/enabled ,
+i.e., removes symlink
+.It Nm Ar reload
+Reload
+.Cm *.conf in
+.Pa /etc/finit.d ,
+i.e., activates changes
+.It Nm Ar cond set Ar COND
+Set (assert) user-defined condition,
+.Cm +usr/COND
+.It Nm Ar cond clr | clear Ar COND
+Clear (deassert) user-defined condition,
+.Cm -usr/COND
+.It Nm Ar cond status
+Show condition status, default
+.Cm cond
+command.
+.It Nm Ar cond dump
+Dump all conditions and their status
+.It Nm Ar log Op Cm NAME
+Show ten last Finit, or
+.Cm NAME ,
+messages from syslog
+.It Nm Ar start Cm NAME[:ID]
+Start service by name, with optional ID, e.g.,
+.Cm initctl start tty:1
+.It Nm Ar stop Cm NAME[:ID]
+Stop/Pause a running service by name
+.It Nm Ar reload Cm NAME[:ID]
+Reload service by name (SIGHUP or restart)
+.It Nm Ar restart Cm NAME[:ID]
+Restart (stop/start) service by name
+.It Nm Ar status Cm NAME[:ID]
+Show service status, by name
+.It Nm Ar status
+Show status of all services, default command
+.It Nm Ar cgroup
+List cgroup config overview
+.It Nm Ar ps
+List processes based on cgroups
+.It Nm Ar top
+Show top-like listing based on cgroups
+.It Nm Ar runlevel Op Ar 0-9
+Show or set runlevel: 0 halt, 6 reboot
+.It Nm Ar reboot
+Reboot system, default if
+.Cm reboot
+is symlinked to
+.Nm
+.It Nm Ar halt
+Halt system, default if
+.Cm halt
+is symlinked to
+.Nm
+.It Nm Ar poweroff
+Power-off system, default if
+.Cm poweroff
+is symlinked to
+.Nm
+.It Nm Ar suspend
+Suspend system, default if
+.Cm suspend
+is symlinked to
+.Nm
+.It Nm Ar utmp show
+Raw dump of UTMP/WTMP db
+.El
+.Sh SEE ALSO
+.Xr finit.conf 5
+.Xr finit 8
+.Sh AUTHORS
+.Nm finit
+was conceived and reverse engineered by Claudio Matsuoka.  Since v1.0,
+maintained by Joachim Wiberg, with contributions by many others.

plugins/sys.c

@@ -41,17 +41,31 @@ static int sys_add_path(struct iwatch *iw, char *path)
 	return iwatch_add(iw, path, IN_ONLYDIR | IN_CLOSE_WRITE);
 }
 
+/*
+ * unlink conditions with no active task/service, otherwise they may
+ * trigger inadvertently when calling `initctl reload` to activate
+ * a new configuration.
+ */
 static void sys_update_conds(char *dir, char *name, uint32_t mask)
 {
+	char path[256];
 	char *cond;
+	char *ptr;
 
-	cond = strstr(name, COND_BASE);
+	ptr = strrchr(name, '/');
+	if (ptr)
+		snprintf(path, sizeof(path), "%s/%s", dir, ++ptr);
+	else
+		snprintf(path, sizeof(path), "%s/%s", dir, name);
+
+	cond = strstr(path, COND_BASE);
 	if (!cond)
 		return;
 
 	cond += strlen(COND_BASE) + 1;
 	_d("cond: %s set: %d", cond, mask & IN_CREATE ? 1 : 0);
-	cond_update(cond);
+	if (!cond_update(cond))
+		unlink(path);
 }
 
 /* synthesize events in case of new run dirs */

src/cond-w.c

@@ -164,18 +164,22 @@ int cond_set_path(const char *path, enum cond_state next)
 }
 
 /* Should only be used by cond_set*(), cond_clear(), and usr/sys plugins! */
-void cond_update(const char *name)
+int cond_update(const char *name)
 {
 	svc_t *svc, *iter = NULL;
+	int affects = 0;
 
 	_d("%s", name);
 	for (svc = svc_iterator(&iter, 1); svc; svc = svc_iterator(&iter, 0)) {
 		if (!svc_has_cond(svc) || !cond_affects(name, svc->cond))
 			continue;
 
+		affects++;
 		_d("%s: match <%s> %s(%s)", name ?: "nil", svc->cond, svc->desc, svc->cmd);
 		service_step(svc);
 	}
+
+	return affects;
 }
 
 int cond_set_noupdate(const char *name)

src/cond.h

@@ -30,7 +30,7 @@ enum cond_state cond_get     (const char *name);
 enum cond_state cond_get_agg (const char *names);
 int             cond_affects (const char *name, const char *names);
 
-void cond_update      (const char *name);
+int  cond_update      (const char *name);
 int  cond_set_path    (const char *path, enum cond_state new);
 void cond_set         (const char *name);
 void cond_set_oneshot (const char *name);

src/exec.c

@@ -281,8 +281,12 @@ static void prepare_tty(char *tty, speed_t speed, char *procname, struct rlimit
 
 static int activate_console(int noclear, int nowait)
 {
+	static const char msg[] = "\nPlease press Enter to activate this console.";
+	static const char clr[] = "\r\e[2K";
+	static const char cup[] = "\e[A";
 	struct termios orig;
-	int ret = 0;
+	char c;
+	int rc;
 
 	if (nowait || rescue)
 		return 1;
@@ -301,36 +305,24 @@ static int activate_console(int noclear, int nowait)
 		tcsetattr(STDIN_FILENO, TCSAFLUSH, &c);
 	}
 
-	while (!fexist(SYNC_SHUTDOWN)) {
+	dprint(STDERR_FILENO, clr, strlen(clr));
-		char c;
+	dprint(STDERR_FILENO, msg, strlen(msg));
-		static const char clr[] = "\r\e[2K";
+	while ((rc = read(STDIN_FILENO, &c, 1)) > 0 && c != '\r' && c != '\n')
-		static const char cup[] = "\e[A";
+		continue;
-		static const char msg[] = "\nPlease press Enter to activate this console.";
 
-		if (fexist(SYNC_STOPPED)) {
+	/* On any error (likely EINTR), we avoid starting getty */
-			sleep(5);
+	if (rc == -1)
-			continue;
+		rc = 0;
-		}
 
-		dprint(STDERR_FILENO, clr, strlen(clr));
+	/* Clear msg and move cursor up for next message/login: */
-		dprint(STDERR_FILENO, msg, strlen(msg));
+	dprint(STDERR_FILENO, clr, strlen(clr));
-		while (read(STDIN_FILENO, &c, 1) == 1 && c != '\r')
+	dprint(STDERR_FILENO, cup, strlen(cup));
-			continue;
-
-		if (fexist(SYNC_STOPPED))
-			continue;
-
-		dprint(STDERR_FILENO, clr, strlen(clr));
-		dprint(STDERR_FILENO, cup, strlen(cup));
-		ret = 1;
-		break;
-	}
 
 	/* Restore TTY */
 	if (tcsetattr(STDIN_FILENO, TCSAFLUSH, &orig) == -1)
-		ret = 0;
+		rc = 0;		/* TTY in bad shape, restart */
 
-	return ret;
+	return rc;
 }
 
 /*

src/finit.c

@@ -66,6 +66,7 @@ char *network   = NULL;
 char *hostname  = NULL;
 char *rcsd      = FINIT_RCSD;
 char *runparts  = NULL;
+char *osheading = NULL;
 
 uev_ctx_t *ctx  = NULL;		/* Main loop context */
 svc_t *wdog     = NULL;		/* No watchdog by default */
@@ -90,7 +91,14 @@ static void banner(void)
 	 */
 	plugin_run_hooks(HOOK_BANNER);
 
-	print_banner(INIT_HEADING);
+#ifdef INIT_OSHEADING
+	osheading = INIT_OSHEADING;
+	if (osheading) {
+		if (!osheading[0])
+			osheading = release_heading();
+		print_banner(osheading);
+	}
+#endif
 }
 
 /*

src/finit.h

@@ -115,6 +115,7 @@ extern char  *sdown;
 extern char  *network;
 extern char  *hostname;
 extern char  *runparts;
+extern char  *osheading;
 extern uev_ctx_t *ctx;
 
 #endif /* FINIT_H_ */

src/getty.c

@@ -198,6 +198,7 @@ static int getty(char *tty, speed_t speed, char *term, char *user)
 {
 	const char cln[] = "\r\e[2K\n";
 	char name[33];		/* useradd(1) limit at 32 chars */
+	pid_t sid;
 
 	/*
 	 * Clean up tty name.
@@ -214,13 +215,18 @@ static int getty(char *tty, speed_t speed, char *term, char *user)
 restart:
 	stty(STDIN_FILENO, speed);
 	if (!user) {
-		if (get_logname(tty, name, sizeof(name))) {
+		if (get_logname(tty, name, sizeof(name)))
-			sleep(5);
 			goto restart;
-		}
 	} else
 		strlcpy(name, user, sizeof(name));
 
+	/* check current session associated with our tty */
+	sid = tcgetsid(0);
+	if (sid < 0 || getpid() != sid) {
+		if (ioctl(STDIN_FILENO, TIOCSCTTY, 1) == -1)
+			err(1, "failed stealing controlling TTY");
+	}
+
 	if (term && term[0])
 		setenv("TERM", term, 1);
 

src/helpers.c

@@ -124,6 +124,49 @@ void show_progress(pstyle_t style)
 	progress_onoff = style;
 }
 
+/*
+ * Find PRETTY_NAME in /etc/os-release to use as heading at boot
+ * and on runlevel changes.  Fallback: "Finit vX.YY"
+ */
+char *release_heading(void)
+{
+	char *name = NULL;
+	char buf[256];
+	FILE *fp;
+
+	fp = fopen("/etc/os-release", "r");
+	if (fp) {
+		while (fgets(buf, sizeof(buf), fp)) {
+			char *ptr = &buf[12];
+
+			if (strncmp(buf, "PRETTY_NAME=", 12))
+				continue;
+
+			if (*ptr == '"' || *ptr == '\'') {
+				char *end = &ptr[strlen(ptr) - 1];
+				char q = *ptr;
+
+				while (end > ptr && isspace(*end))
+					*end-- = 0;
+
+				if (*end == q) {
+					*end = 0;
+					ptr++;
+				}
+			}
+
+			name = strdup(ptr);
+			break;
+		}
+		fclose(fp);
+	}
+
+	if (!name)
+		name = strdup(PACKAGE_NAME " v" PACKAGE_VERSION);
+
+	return name;
+}
+
 /*
  * Return screen length of string, not counting escape chars, and
  * accounting for unicode characters as only one screen byte wide

src/helpers.h

@@ -68,6 +68,8 @@ char   *strip_line      (char *line);
 void    enable_progress (int onoff);
 void    show_progress   (pstyle_t style);
 
+char   *release_heading (void);
+
 speed_t stty_parse_speed(char *baud);
 void    stty            (int fd, speed_t speed);
 

src/service.c

@@ -347,8 +347,7 @@ static void source_env(svc_t *svc)
 
 static int is_norespawn(void)
 {
-	return  sig_stopped()            ||
+	return  fexist("/mnt/norespawn") ||
-		fexist("/mnt/norespawn") ||
 		fexist("/tmp/norespawn");
 }
 
@@ -725,6 +724,13 @@ static int service_stop(svc_t *svc)
 		logit(LOG_CONSOLE | LOG_NOTICE, "Calling '%s stop' ...", svc->cmd);
 	}
 
+	/*
+	 * Make sure we are no longer considering the service to be starting (if
+	 * that was the case). service_monitor() might get confused otherwise, and
+	 * leave the service in a lingering, "stopping", state.
+	 */
+	svc_started(svc);
+
 	svc_set_state(svc, SVC_STOPPING_STATE);
 
 	if (!svc->desc[0])
@@ -1416,7 +1422,7 @@ void service_monitor(pid_t lost, int status)
 {
 	svc_t *svc;
 
-	if (fexist(SYNC_SHUTDOWN) || lost <= 1)
+	if (lost <= 1)
 		return;
 
 	svc = svc_find_by_pid(lost);

src/sig.c

@@ -96,11 +96,9 @@ extern svc_t *wdog;
  */
 shutop_t halt = SHUT_DEFAULT;
 
-static int   stopped = 0;
 static uev_t sigterm_watcher, sigusr1_watcher, sigusr2_watcher;
 static uev_t sighup_watcher,  sigint_watcher,  sigpwr_watcher;
 static uev_t sigchld_watcher;
-static uev_t sigstop_watcher, sigtstp_watcher, sigcont_watcher;
 
 static struct sigmap {
 	int   num;
@@ -211,8 +209,6 @@ void do_kill(int signo)
 
 void do_shutdown(shutop_t op)
 {
-	touch(SYNC_SHUTDOWN);
-
 	if (sdown)
 		run_interactive(sdown, "Calling shutdown hook: %s", sdown);
 
@@ -403,49 +399,17 @@ static void sigchld_cb(uev_t *w, void *arg, int events)
 	}
 
 	/* Reap all the children! */
-	do {
+	while (1) {
 		pid = waitpid(-1, &status, WNOHANG);
-		if (pid > 0) {
+		if (pid <= 0) {
-			_d("Collected child %d", pid);
+			if (pid == -1 && errno == EINTR)
-			service_monitor(pid, status);
+				continue;
+			break;
 		}
-	} while (pid > 0);
-}
 
-/*
+		_d("Collected child %d", pid);
- * SIGSTOP/SIGTSTP: Paused by user or netflash
+		service_monitor(pid, status);
- */
-static void sigstop_cb(uev_t *w, void *arg, int events)
-{
-	if (UEV_ERROR == events) {
-		_e("Unrecoverable error in signal watcher");
-		return;
 	}
-
-	touch(SYNC_STOPPED);
-	stopped++;
-}
-
-/*
- * SIGCONT: Restart service monitor
- */
-static void sigcont_cb(uev_t *w, void *arg, int events)
-{
-	if (UEV_ERROR == events) {
-		_e("Unrecoverable error in signal watcher");
-		return;
-	}
-
-	stopped = 0;
-	erase(SYNC_STOPPED);
-}
-
-/*
- * Is SIGSTOP asserted?
- */
-int sig_stopped(void)
-{
-	return stopped;
 }
 
 /*
@@ -535,10 +499,6 @@ void sig_setup(uev_ctx_t *ctx)
 
 	_d("Setup signals");
 
-	/* Cleanup any stale finit control files */
-	erase(SYNC_SHUTDOWN);
-	erase(SYNC_STOPPED);
-
 	/*
 	 * Standard SysV init calls ctrl-alt-delete handler
 	 * We need to disable kernel default so it sends us SIGINT
@@ -561,11 +521,6 @@ void sig_setup(uev_ctx_t *ctx)
 	/* After initial bootstrap of Finit we call the service monitor to reap children */
 	uev_signal_init(ctx, &sigchld_watcher, sigchld_cb, NULL, SIGCHLD);
 
-	/* Stopping init is a bit tricky. */
-	uev_signal_init(ctx, &sigstop_watcher, sigstop_cb, NULL, SIGSTOP);
-	uev_signal_init(ctx, &sigtstp_watcher, sigstop_cb, NULL, SIGTSTP);
-	uev_signal_init(ctx, &sigcont_watcher, sigcont_cb, NULL, SIGCONT);
-
 	setsid();
 }
 

src/sig.h

@@ -28,9 +28,6 @@
 #include <signal.h>
 #include <uev/uev.h>
 
-#define SYNC_SHUTDOWN   "/var/run/finit/.shutdown"
-#define SYNC_STOPPED    "/var/run/finit/.stopped"
-
 #define SETSIG(sa, sig, fun, flags)			\
 	do {						\
 		sa.sa_sigaction = fun;			\
@@ -69,7 +66,6 @@ typedef enum {
 extern shutop_t halt;
 
 void do_shutdown    (shutop_t op);
-int  sig_stopped    (void);
 int  sig_num        (const char *name);
 void sig_init       (void);
 void sig_unblock    (void);

src/sm.c

@@ -150,7 +150,10 @@ restart:
 		}
 
 		_d("Setting new runlevel --> %d <-- previous %d", runlevel, prevlevel);
-		logit(LOG_CONSOLE | LOG_NOTICE, "%s, entering runlevel %d", INIT_HEADING, runlevel);
+		if (osheading)
+			logit(LOG_CONSOLE | LOG_NOTICE, "%s, entering runlevel %d", osheading, runlevel);
+		else
+			logit(LOG_CONSOLE | LOG_NOTICE, "Entering runlevel %d", runlevel);
 		runlevel_set(prevlevel, runlevel);
 
 		/* Disable login in single-user mode as well as shutdown/reboot */