Compare commits

..
Author SHA1 Message Date
Niels Lohmann b3dd34036a Make unflatten() linear in the length of the keys
unflatten() decides in a first pass which prefixes of the keys denote arrays
(those that have a reference token 0 among their children), and looks up
prefixes again in the second pass. A prefix was identified by hashing it, and
by comparing it byte by byte with the entry in the set, from its beginning.
A key with n tokens therefore cost n^2/2 bytes: 100,000 tokens "/0" took
2.4 s (3.12.0: 5 ms), and so did "/0" followed by "/1" tokens, because every
new level looks its prefix up. Keys in the order of an unsorted object type
(ordered_json) defeated the shortcut for keys that share a beginning with the
previous one: four keys were enough to be quadratic.

Prefixes of less than 64 bytes are kept in a hash table and compared as
before, which costs a bounded number of bytes. Longer prefixes are kept in a
tree whose nodes are looked up by their parent and the text of one token. The
node of a prefix is found by walking the tokens of the key from the root, so
all prefixes of a key together cost one pass over the key, and no prefix is
compared as a whole. The nodes along the key walked last are kept, so keys
that share a beginning do not walk it again. The array/object decision and
the independence from the order of the keys are unchanged.

The hash function is seeded with a value derived from the address of a local
variable, which address space layout randomization changes between
processes, so keys cannot be crafted to collide in advance: with the fixed
constants, 20,000 keys of 16 + 2 bytes with the same hash took 0.5 s (random
keys, and 3.12.0: 7 ms). Where addresses are not randomized, or when the seed
is known, k short prefixes can still collide and cost k^2 / 2 comparisons of
fewer than 64 bytes. Results do not depend on the seed.

Measurements (Apple clang -O2, arm64), unflatten() of one key with n tokens:

  tokens "/0"          n=25k  n=50k  n=100k  n=200k
  before              175 ms 617 ms 2437 ms 9729 ms
  after                 4 ms   6 ms   12 ms   27 ms
  3.12.0                1 ms   3 ms    5 ms   10 ms

  "/0" then "/1"       n=25k  n=50k  n=100k  n=200k
  before              153 ms 603 ms 2436 ms 9678 ms
  after                 1 ms   3 ms    5 ms   10 ms
  3.12.0                1 ms   3 ms    5 ms   11 ms

  ordered_json, 4 keys /0*m/a0, /10, /0*m/a1, /11
                       m=25k  m=50k  m=100k  m=200k
  before              397 ms 1402 ms 5191 ms 20723 ms
  after                 4 ms   7 ms   15 ms   33 ms
  3.12.0                2 ms   3 ms    8 ms   17 ms

Ordinary documents (flatten() then unflatten(), instructions retired): within
0.3 % of before for canada, citm_catalog, twitter, jeopardy, mesh,
update-center and random from the benchmark corpus.

Signed-off-by: Niels Lohmann <mail@nlohmann.me>
2026-11-11 12:36:01 +01:00
12 changed files with 1019 additions and 488 deletions

No files matched your search

@@ -67,11 +67,7 @@ basic_json(basic_json&& other) noexcept;
- **objects**: [`object_t`](object_t.md) and all kinds of compatible associative containers such as `std::map`, - **objects**: [`object_t`](object_t.md) and all kinds of compatible associative containers such as `std::map`,
`std::unordered_map`, `std::multimap`, and `std::unordered_multimap` with a `key_type` compatible to `string_t` `std::unordered_map`, `std::multimap`, and `std::unordered_multimap` with a `key_type` compatible to `string_t`
and a `value_type` from which a `basic_json` value can be constructed. and a `value_type` from which a `basic_json` value can be constructed.
- **strings**: `string_t`, string literals, and all compatible string containers can be used. Since version 3.13.0, - **strings**: `string_t`, string literals, and all compatible string containers can be used.
this includes `#!cpp std::u8string` (C++20): its code units are stored as a JSON string and
[`get<std::u8string>()`](get.md) reads it back (in version 3.12.0, a `#!cpp std::u8string` was stored as an array
of numbers; `get<std::u8string>()` still accepts such an array). `#!cpp std::u8string_view` and `#!cpp char8_t`
arrays are not strings; they are stored as arrays of code units.
!!! note "Rvalue containers are moved from" !!! note "Rvalue containers are moved from"
-6
View File
@@ -130,12 +130,6 @@ overload (3).
`#!cpp json(true).get<double>()` throw. This is the behavior of all 3.x versions; `#!cpp json(true).get<double>()` throw. This is the behavior of all 3.x versions;
[`basic_json_view::get<T>()`](../basic_json_view/get.md) behaves the same. [`basic_json_view::get<T>()`](../basic_json_view/get.md) behaves the same.
!!! note "`std::u8string` conversions"
Since version 3.13.0, `#!cpp get<std::u8string>()` (C++20) reads a JSON string; it also accepts an array of numbers,
the form in which version 3.12.0 stored a `#!cpp std::u8string`. Any other JSON type throws
[`type_error.302`](../../home/exceptions.md#jsonexceptiontype_error302) ("type must be string or array").
!!! note "`std::optional` conversions" !!! note "`std::optional` conversions"
Prior to version 3.13.0, `#!cpp get<std::optional<T>>()` (and other conversions to `std::optional<T>`) failed to Prior to version 3.13.0, `#!cpp get<std::optional<T>>()` (and other conversions to `std::optional<T>`) failed to
@@ -425,7 +425,7 @@ using array_t = ArrayType<basic_json, AllocatorType<basic_json>>;
| Type | Reason | | Type | Reason |
|----------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------| |----------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------|
| `#!cpp std::wstring`, `#!cpp std::u16string`, `#!cpp std::u32string` | the character type is not one byte wide | | `#!cpp std::wstring`, `#!cpp std::u16string`, `#!cpp std::u32string` | the character type is not one byte wide |
| `#!cpp std::u8string` | one byte wide, but `#!cpp char8_t` is not `#!cpp char`-compatible (as a *value*, it converts to and from a JSON string) | | `#!cpp std::u8string` | one byte wide, but `#!cpp char8_t` is not `#!cpp char`-compatible |
| `absl::Cord` | no `value_type`, and the storage is not contiguous | | `absl::Cord` | no `value_type`, and the storage is not contiguous |
| `QString` | no `append(const char*, size_type)`; its `QChar` is also two bytes wide, though that is never diagnosed | | `QString` | no `append(const char*, size_type)`; its `QChar` is also two bytes wide, though that is never diagnosed |
@@ -8,16 +8,6 @@ These changes are part of the `develop` branch, but not of a release yet.
exception is thrown during the conversion, the source may be partially moved-from, so the strong exception guarantee exception is thrown during the conversion, the source may be partially moved-from, so the strong exception guarantee
no longer holds for the source of an rvalue conversion (the JSON value itself is unaffected). Lvalues and `const` no longer holds for the source of an rvalue conversion (the JSON value itself is unaffected). Lvalues and `const`
objects are still copied. See [`basic_json`](../../api/basic_json/basic_json.md). objects are still copied. See [`basic_json`](../../api/basic_json/basic_json.md).
- In C++20 (library support for `char8_t`, `__cpp_lib_char8_t`), a `#!cpp std::u8string` is a JSON **string**:
`json j = std::u8string(u8"abc");` stores `"abc"`, and `#!cpp j.get<std::u8string>()` reads it back. Version 3.12.0
stored a `#!cpp std::u8string` as an array of code units (`[97,98,99]`); on the 3.13.0 development branch it was
already stored as a string if `std::filesystem` is available, but could not be read back. Now the result no longer
depends on whether `std::filesystem::path` is supported, and `#!cpp get<std::u8string>()` accepts both a JSON string
and the array of numbers written by 3.12.0. **Consequence:** JSON documents produced from a `#!cpp std::u8string` by
3.12.0 (arrays) are still read, but code that checks `is_array()` on such a value, or that reads it as
`#!cpp std::vector<char8_t>` / `#!cpp std::vector<std::uint8_t>`, now sees a string; to keep the array form, convert
explicitly, e.g., `#!cpp json(std::vector<char8_t>(s.begin(), s.end()))`. `#!cpp std::u8string_view` and
`#!cpp char8_t` arrays are unchanged (arrays of code units). See [`basic_json`](../../api/basic_json/basic_json.md).
## API changes ## API changes
@@ -785,37 +785,6 @@ void from_json(const BasicJsonType& j, std::unordered_map<Key, Value, Hash, KeyE
from_json_pair_array_to_map(j, m); from_json_pair_array_to_map(j, m);
} }
#if defined(__cpp_lib_char8_t)
// a std::u8string is read from a JSON string; the array of code units written by
// versions before 3.13.0 is still accepted
template < typename BasicJsonType, typename Tr, typename Allocator,
enable_if_t < std::is_same<typename json_type_of_t<BasicJsonType>::string_t::value_type, char>::value, int > = 0 >
inline void from_json(const BasicJsonType& j, std::basic_string<char8_t, Tr, Allocator>& s)
{
if (j.is_string())
{
const auto& str = string_value(j);
const char* const data = str.data();
const std::size_t size = str.size();
std::basic_string<char8_t, Tr, Allocator> ret(s.get_allocator());
ret.reserve(size);
for (std::size_t i = 0; i < size; ++i)
{
ret.push_back(static_cast<char8_t>(static_cast<unsigned char>(data[i])));
}
s = std::move(ret);
}
else if (j.is_array())
{
from_json_array_impl(j, s, priority_tag<3> {});
}
else
{
throw_type_must_be("string or array", j);
}
}
#endif
#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM #if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
// Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_from_json (issue #4996) // Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_from_json (issue #4996)
@@ -625,20 +625,16 @@ inline void to_json(BasicJsonType& j, const T& t)
to_json_tuple_impl(j, t, make_index_sequence<std::tuple_size<T>::value> {}); to_json_tuple_impl(j, t, make_index_sequence<std::tuple_size<T>::value> {});
} }
// a std::u8string is a JSON string (it was an array of code units before 3.13.0); #if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
// defined outside the std::filesystem guard so that the result does not depend
// on whether std::filesystem::path is supported
#if defined(__cpp_lib_char8_t) #if defined(__cpp_lib_char8_t)
template<typename BasicJsonType, typename Tr, typename Allocator> template<typename BasicJsonType, typename Tr, typename Allocator>
inline void to_json(BasicJsonType& j, const std::basic_string<char8_t, Tr, Allocator>& s) inline void to_json(BasicJsonType& j, const std::basic_string<char8_t, Tr, Allocator>& s)
{ {
using string_t = typename BasicJsonType::string_t; using OtherAllocator = typename std::allocator_traits<Allocator>::template rebind_alloc<char>;
// char may alias any object; the code units are copied unchanged j = std::basic_string<char, std::char_traits<char>, OtherAllocator>(s.begin(), s.end(), s.get_allocator());
j = string_t(reinterpret_cast<const char*>(s.data()), s.size());
} }
#endif #endif
#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
// Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_to_json (issue #4996) // Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_to_json (issue #4996)
template<typename BasicJsonType> template<typename BasicJsonType>
struct has_to_json<BasicJsonType, std_fs::path, void> : std::true_type {}; struct has_to_json<BasicJsonType, std_fs::path, void> : std::true_type {};
+351 -135
View File
@@ -852,139 +852,6 @@ class json_pointer
} }
private: private:
/*!
@brief the pointer prefixes of a flattened object that denote arrays
@ref unflatten creates arrays exactly below the prefixes that have a
reference token 0 among their children, and objects everywhere else.
Deciding this up front keeps the result independent of the order in which
the flattened object is iterated, which is unspecified for some object
types.
A prefix is identified by the text of the key it is the beginning of:
escaping is unambiguous, so equal prefixes of valid keys are equal texts.
The set refers to the keys, which must outlive it.
*/
class array_prefix_set
{
public:
void insert(const char* data, std::size_t size)
{
// flattened objects are usually sorted, so most keys that have a
// 0 yield the prefix of the previous one
if (last_data != nullptr && last_size == size && std::memcmp(last_data, data, size) == 0)
{
return;
}
last_data = data;
last_size = size;
if (table.empty())
{
table.resize(16);
}
const std::size_t hash = hash_of(data, size);
const std::size_t mask = table.size() - 1;
std::size_t i = hash & mask;
while (table[i].data != nullptr)
{
if (table[i].hash == hash && table[i].size == size && std::memcmp(table[i].data, data, size) == 0)
{
return;
}
i = (i + 1) & mask;
}
table[i] = slot(hash, data, size);
// keep the load factor below 1/2
if (++used * 2 > table.size())
{
grow();
}
}
bool empty() const noexcept
{
return used == 0;
}
bool contains(const char* data, std::size_t size) const noexcept
{
if (used == 0)
{
return false;
}
const std::size_t hash = hash_of(data, size);
const std::size_t mask = table.size() - 1;
for (std::size_t i = hash & mask; table[i].data != nullptr; i = (i + 1) & mask)
{
if (table[i].hash == hash && table[i].size == size && std::memcmp(table[i].data, data, size) == 0)
{
return true;
}
}
return false;
}
private:
struct slot
{
slot() noexcept = default;
slot(std::size_t h, const char* d, std::size_t s) noexcept
: hash(h), data(d), size(s)
{}
std::size_t hash = 0;
const char* data = nullptr; // nullptr: the slot is empty
std::size_t size = 0;
};
static std::size_t hash_of(const char* data, std::size_t size) noexcept
{
std::uint64_t h = 0x9E3779B97F4A7C15ULL ^ size;
std::size_t i = 0;
for (; i + 8 <= size; i += 8)
{
std::uint64_t w = 0;
std::memcpy(&w, data + i, 8);
h = (h ^ w) * 0x100000001B3ULL;
h ^= h >> 32u;
}
std::uint64_t w = 0;
if (i < size)
{
std::memcpy(&w, data + i, size - i);
}
h = (h ^ w) * 0x9E3779B97F4A7C15ULL;
return detail::conditional_static_cast<std::size_t>(h ^ (h >> 29u));
}
void grow()
{
std::vector<slot> old(table.size() * 2);
old.swap(table);
const std::size_t mask = table.size() - 1;
for (const auto& s : old)
{
if (s.data != nullptr)
{
std::size_t i = s.hash & mask;
while (table[i].data != nullptr)
{
i = (i + 1) & mask;
}
table[i] = s;
}
}
}
std::vector<slot> table{};
std::size_t used = 0;
const char* last_data = nullptr;
std::size_t last_size = 0;
};
/// @brief the length of the longest common prefix of the first @a limit bytes of @a a and @a b /// @brief the length of the longest common prefix of the first @a limit bytes of @a a and @a b
static std::size_t common_prefix_length(const char* a, const char* b, const std::size_t limit) noexcept static std::size_t common_prefix_length(const char* a, const char* b, const std::size_t limit) noexcept
{ {
@@ -1007,6 +874,354 @@ class json_pointer
return i; return i;
} }
/*!
@brief the prefixes of a flattened object that are marked as arrays, for
prefixes that are not short
A prefix is identified by the tokens it consists of: a node of a tree
stands for the prefix of its parent followed by a token, and is looked up
by its parent and the text of the token. The node of a prefix is found by
walking the tokens of the key from the root, so identifying all prefixes
of a key together costs one pass over the key, however long the prefixes
are, and no prefix is ever compared byte by byte as a whole. The nodes
along the key that was walked last are kept, and the walk of the next key
starts below the beginning it has in common with that key. The tree refers
to the keys, which must outlive it.
*/
class prefix_tree
{
public:
/// @brief set the seed of the hash function, before anything is added
void reseed(const std::uint64_t seed_value) noexcept
{
seed = seed_value;
}
/// @brief mark the first @a prefix_size bytes of the key of @a key_size bytes at @a data
void mark(const char* data, std::size_t key_size, std::size_t prefix_size)
{
nodes[walk(data, key_size, prefix_size)].marked = true;
any_marked = true;
}
bool is_marked(const char* data, std::size_t key_size, std::size_t prefix_size)
{
return any_marked && nodes[walk(data, key_size, prefix_size)].marked;
}
bool empty() const noexcept
{
return !any_marked;
}
/// @brief the hash of the first @a size bytes at @a data, for the seed @a seed_value
static std::size_t hash_bytes(const char* data, std::size_t size, const std::uint64_t seed_value) noexcept
{
std::uint64_t h = seed_value ^ size;
std::size_t i = 0;
for (; i + 8 <= size; i += 8)
{
std::uint64_t w = 0;
std::memcpy(&w, data + i, 8);
h = (h ^ w) * 0x100000001B3ULL;
h ^= h >> 32u;
}
std::uint64_t w = 0;
if (i < size)
{
std::memcpy(&w, data + i, size - i);
}
h = (h ^ w) * 0x9E3779B97F4A7C15ULL;
return detail::conditional_static_cast<std::size_t>(h ^ (h >> 29u));
}
private:
struct node
{
std::size_t parent = 0;
std::size_t hash = 0;
const char* token = nullptr;
std::size_t token_size = 0;
bool marked = false;
};
/// @brief a slot of the hash table; the index of a node, 0 if the slot is empty
struct bucket
{
std::size_t index = 0;
};
/// @brief the node after a token of the key that was walked last, and where the token ends
struct step
{
std::size_t node = 0;
std::size_t end = 0;
};
/// @brief the index of the node of the prefix that ends at the slash (or the end) at @a prefix_size
std::size_t walk(const char* data, std::size_t key_size, std::size_t prefix_size)
{
if (nodes.empty())
{
nodes.emplace_back();
table.resize(16);
chain.emplace_back();
}
if (data != last_key)
{
// keep the nodes within the beginning that this key has in common
// with the key they were found for; a prefix that ends inside a
// token of this key is not one of its prefixes
const std::size_t same = common_prefix_length(data, last_key, (std::min)(key_size, last_key_size));
std::size_t keep = chain.size();
while (keep > 1 && (chain[keep - 1].end > same || (chain[keep - 1].end == same && same < key_size && data[same] != '/')))
{
--keep;
}
chain.resize(keep);
last_key = data;
last_key_size = key_size;
}
// walk the tokens that are not walked yet
while (chain.back().end < prefix_size && chain.back().end < key_size)
{
const std::size_t start = chain.back().end + 1;
const void* const slash = std::memchr(data + start, '/', key_size - start);
const std::size_t end = slash == nullptr ? key_size : static_cast<std::size_t>(static_cast<const char*>(slash) - data);
step next;
next.node = child(chain.back().node, data + start, end - start);
next.end = end;
chain.push_back(next);
}
if (chain.back().end == prefix_size)
{
return chain.back().node;
}
// an earlier call walked further
const auto it = std::lower_bound(chain.begin(), chain.end(), prefix_size, [](const step & s, std::size_t size)
{
return s.end < size;
});
return it->node;
}
std::size_t slot_of(std::size_t parent, std::size_t hash) const noexcept
{
std::uint64_t x = static_cast<std::uint64_t>(hash) ^ (static_cast<std::uint64_t>(parent) * 0x9E3779B97F4A7C15ULL);
x ^= x >> 32u;
x *= 0xD6E8FEB86659FD93ULL;
x ^= x >> 32u;
return static_cast<std::size_t>(x) & (table.size() - 1);
}
/// @brief the node of the prefix of the node @a parent followed by the token, which is added if it is not there
std::size_t child(std::size_t parent, const char* token, std::size_t token_size)
{
const std::size_t hash = hash_bytes(token, token_size, seed);
std::size_t i = slot_of(parent, hash);
while (table[i].index != 0)
{
const node& n = nodes[table[i].index];
if (n.parent == parent && n.hash == hash && n.token_size == token_size && std::memcmp(n.token, token, token_size) == 0)
{
return table[i].index;
}
i = (i + 1) & (table.size() - 1);
}
node created;
created.parent = parent;
created.hash = hash;
created.token = token;
created.token_size = token_size;
nodes.push_back(created);
table[i].index = nodes.size() - 1;
// keep the load factor below 1/2
if (nodes.size() * 2 > table.size())
{
std::vector<bucket> old(table.size() * 2);
old.swap(table);
for (std::size_t k = 1; k < nodes.size(); ++k)
{
std::size_t j = slot_of(nodes[k].parent, nodes[k].hash);
while (table[j].index != 0)
{
j = (j + 1) & (table.size() - 1);
}
table[j].index = k;
}
}
return nodes.size() - 1;
}
std::uint64_t seed = 0;
/// @brief the nodes; the first is the root, the empty prefix
std::vector<node> nodes{};
/// @brief the nodes (not the root) in a hash table
std::vector<bucket> table{};
/// @brief the root, and the node after each token of the key that was walked last
std::vector<step> chain{};
const char* last_key = nullptr;
std::size_t last_key_size = 0;
bool any_marked = false;
};
/*!
@brief the pointer prefixes of a flattened object that denote arrays
@ref unflatten creates arrays exactly below the prefixes that have a
reference token 0 among their children, and objects everywhere else.
Deciding this up front keeps the result independent of the order in which
the flattened object is iterated, which is unspecified for some object
types.
A prefix is identified by the text of the key it is the beginning of:
escaping is unambiguous, so equal prefixes of valid keys are equal texts.
The set refers to the keys, which must outlive it. Short prefixes are
kept in a hash table and compared as texts, which costs at most the length
of the bound. Longer prefixes are kept in a @ref prefix_tree, because
hashing and comparing every one of the prefixes of a key with many tokens
from its beginning would take quadratic time.
The hash function depends on a seed that is derived from the address of a
local variable, which address space layout randomization changes between
processes, so keys cannot be crafted to collide in advance; the result
does not depend on the seed. Where the addresses are not randomized, or
when the seed is known, keys can collide: k short prefixes then cost
k^2 / 2 comparisons of fewer than 64 bytes each. The long prefixes are not
hashed as a whole.
*/
class array_prefix_set
{
public:
/// @brief choose the seed of the hash function, before anything is added: it is derived from the address that is passed
void reseed(const void* address) noexcept
{
// NOLINTNEXTLINE(cppcoreguidelines-pro-type-reinterpret-cast): the address is only a source of entropy
std::uint64_t x = static_cast<std::uint64_t>(reinterpret_cast<std::uintptr_t>(address)) ^ 0x9E3779B97F4A7C15ULL;
x *= 0xBF58476D1CE4E5B9ULL;
seed = x ^ (x >> 31u);
tree.reseed(seed);
}
/// @brief add the first @a prefix_size bytes of the key of @a key_size bytes at @a data
void insert(const char* data, std::size_t key_size, std::size_t prefix_size)
{
if (prefix_size >= short_limit)
{
tree.mark(data, key_size, prefix_size);
return;
}
// flattened objects are usually sorted, so most keys that have a
// 0 yield the prefix of the previous one
if (last_data != nullptr && last_size == prefix_size && std::memcmp(last_data, data, prefix_size) == 0)
{
return;
}
last_data = data;
last_size = prefix_size;
const std::size_t hash = prefix_tree::hash_bytes(data, prefix_size, seed);
if (table.empty())
{
table.resize(16);
}
const std::size_t mask = table.size() - 1;
std::size_t i = hash & mask;
while (table[i].data != nullptr)
{
if (table[i].hash == hash && table[i].size == prefix_size && std::memcmp(table[i].data, data, prefix_size) == 0)
{
return;
}
i = (i + 1) & mask;
}
table[i] = slot(hash, data, prefix_size);
// keep the load factor below 1/2
if (++used * 2 > table.size())
{
grow();
}
}
bool empty() const noexcept
{
return used == 0 && tree.empty();
}
/// @brief whether the first @a prefix_size bytes of the key of @a key_size bytes at @a data were added
bool contains(const char* data, std::size_t key_size, std::size_t prefix_size)
{
if (prefix_size >= short_limit)
{
return tree.is_marked(data, key_size, prefix_size);
}
if (used == 0)
{
return false;
}
const std::size_t hash = prefix_tree::hash_bytes(data, prefix_size, seed);
const std::size_t mask = table.size() - 1;
for (std::size_t i = hash & mask; table[i].data != nullptr; i = (i + 1) & mask)
{
if (table[i].hash == hash && table[i].size == prefix_size && std::memcmp(table[i].data, data, prefix_size) == 0)
{
return true;
}
}
return false;
}
private:
/// @brief prefixes of fewer bytes are kept in the hash table
static constexpr std::size_t short_limit = 64;
struct slot
{
slot() noexcept = default;
slot(std::size_t h, const char* d, std::size_t s) noexcept
: hash(h), data(d), size(s)
{}
std::size_t hash = 0;
const char* data = nullptr; // nullptr: the slot is empty
std::size_t size = 0;
};
void grow()
{
std::vector<slot> old(table.size() * 2);
old.swap(table);
const std::size_t mask = table.size() - 1;
for (const auto& s : old)
{
if (s.data != nullptr)
{
std::size_t i = s.hash & mask;
while (table[i].data != nullptr)
{
i = (i + 1) & mask;
}
table[i] = s;
}
}
}
std::uint64_t seed = 0;
prefix_tree tree{};
std::vector<slot> table{};
std::size_t used = 0;
const char* last_data = nullptr;
std::size_t last_size = 0;
};
/*! /*!
@brief check that @a key is a valid JSON pointer, and add the prefixes of @brief check that @a key is a valid JSON pointer, and add the prefixes of
it that denote arrays to @a arrays it that denote arrays to @a arrays
@@ -1052,7 +1267,7 @@ class json_pointer
// a token 0 makes the pointer before it an array // a token 0 makes the pointer before it an array
if (i - begin == 1 && data[begin] == '0') if (i - begin == 1 && data[begin] == '0')
{ {
arrays.insert(data, begin - 1); arrays.insert(data, size, begin - 1);
} }
begin = i + 1; begin = i + 1;
} }
@@ -2062,6 +2277,7 @@ class json_pointer
// token 0 among their children; the values below them are arrays, // token 0 among their children; the values below them are arrays,
// all others are objects (see array_prefix_set) // all others are objects (see array_prefix_set)
array_prefix_set arrays; array_prefix_set arrays;
arrays.reseed(&arrays);
const string_t* previous_key = nullptr; const string_t* previous_key = nullptr;
for (const auto& element : *value.m_data.m_value.object) for (const auto& element : *value.m_data.m_value.object)
{ {
@@ -2153,7 +2369,7 @@ class json_pointer
case detail::value_t::null: case detail::value_t::null:
{ {
// a first child 0 makes the value an array without a look-up // a first child 0 makes the value an array without a look-up
if ((token_size == 1 && data[pos + 1] == '0') || arrays.contains(data, pos)) if ((token_size == 1 && data[pos + 1] == '0') || arrays.contains(data, key.size(), pos))
{ {
// some reference token below this position is 0, so the // some reference token below this position is 0, so the
// value is an array // value is an array
+354 -173
View File
@@ -6928,37 +6928,6 @@ void from_json(const BasicJsonType& j, std::unordered_map<Key, Value, Hash, KeyE
from_json_pair_array_to_map(j, m); from_json_pair_array_to_map(j, m);
} }
#if defined(__cpp_lib_char8_t)
// a std::u8string is read from a JSON string; the array of code units written by
// versions before 3.13.0 is still accepted
template < typename BasicJsonType, typename Tr, typename Allocator,
enable_if_t < std::is_same<typename json_type_of_t<BasicJsonType>::string_t::value_type, char>::value, int > = 0 >
inline void from_json(const BasicJsonType& j, std::basic_string<char8_t, Tr, Allocator>& s)
{
if (j.is_string())
{
const auto& str = string_value(j);
const char* const data = str.data();
const std::size_t size = str.size();
std::basic_string<char8_t, Tr, Allocator> ret(s.get_allocator());
ret.reserve(size);
for (std::size_t i = 0; i < size; ++i)
{
ret.push_back(static_cast<char8_t>(static_cast<unsigned char>(data[i])));
}
s = std::move(ret);
}
else if (j.is_array())
{
from_json_array_impl(j, s, priority_tag<3> {});
}
else
{
throw_type_must_be("string or array", j);
}
}
#endif
#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM #if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
// Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_from_json (issue #4996) // Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_from_json (issue #4996)
@@ -8360,20 +8329,16 @@ inline void to_json(BasicJsonType& j, const T& t)
to_json_tuple_impl(j, t, make_index_sequence<std::tuple_size<T>::value> {}); to_json_tuple_impl(j, t, make_index_sequence<std::tuple_size<T>::value> {});
} }
// a std::u8string is a JSON string (it was an array of code units before 3.13.0); #if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
// defined outside the std::filesystem guard so that the result does not depend
// on whether std::filesystem::path is supported
#if defined(__cpp_lib_char8_t) #if defined(__cpp_lib_char8_t)
template<typename BasicJsonType, typename Tr, typename Allocator> template<typename BasicJsonType, typename Tr, typename Allocator>
inline void to_json(BasicJsonType& j, const std::basic_string<char8_t, Tr, Allocator>& s) inline void to_json(BasicJsonType& j, const std::basic_string<char8_t, Tr, Allocator>& s)
{ {
using string_t = typename BasicJsonType::string_t; using OtherAllocator = typename std::allocator_traits<Allocator>::template rebind_alloc<char>;
// char may alias any object; the code units are copied unchanged j = std::basic_string<char, std::char_traits<char>, OtherAllocator>(s.begin(), s.end(), s.get_allocator());
j = string_t(reinterpret_cast<const char*>(s.data()), s.size());
} }
#endif #endif
#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
// Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_to_json (issue #4996) // Workaround for MSVC 19.51 (and possibly later): in large cpp files, the compiler may fail to resolve with generic has_to_json (issue #4996)
template<typename BasicJsonType> template<typename BasicJsonType>
struct has_to_json<BasicJsonType, std_fs::path, void> : std::true_type {}; struct has_to_json<BasicJsonType, std_fs::path, void> : std::true_type {};
@@ -27062,139 +27027,6 @@ class json_pointer
} }
private: private:
/*!
@brief the pointer prefixes of a flattened object that denote arrays
@ref unflatten creates arrays exactly below the prefixes that have a
reference token 0 among their children, and objects everywhere else.
Deciding this up front keeps the result independent of the order in which
the flattened object is iterated, which is unspecified for some object
types.
A prefix is identified by the text of the key it is the beginning of:
escaping is unambiguous, so equal prefixes of valid keys are equal texts.
The set refers to the keys, which must outlive it.
*/
class array_prefix_set
{
public:
void insert(const char* data, std::size_t size)
{
// flattened objects are usually sorted, so most keys that have a
// 0 yield the prefix of the previous one
if (last_data != nullptr && last_size == size && std::memcmp(last_data, data, size) == 0)
{
return;
}
last_data = data;
last_size = size;
if (table.empty())
{
table.resize(16);
}
const std::size_t hash = hash_of(data, size);
const std::size_t mask = table.size() - 1;
std::size_t i = hash & mask;
while (table[i].data != nullptr)
{
if (table[i].hash == hash && table[i].size == size && std::memcmp(table[i].data, data, size) == 0)
{
return;
}
i = (i + 1) & mask;
}
table[i] = slot(hash, data, size);
// keep the load factor below 1/2
if (++used * 2 > table.size())
{
grow();
}
}
bool empty() const noexcept
{
return used == 0;
}
bool contains(const char* data, std::size_t size) const noexcept
{
if (used == 0)
{
return false;
}
const std::size_t hash = hash_of(data, size);
const std::size_t mask = table.size() - 1;
for (std::size_t i = hash & mask; table[i].data != nullptr; i = (i + 1) & mask)
{
if (table[i].hash == hash && table[i].size == size && std::memcmp(table[i].data, data, size) == 0)
{
return true;
}
}
return false;
}
private:
struct slot
{
slot() noexcept = default;
slot(std::size_t h, const char* d, std::size_t s) noexcept
: hash(h), data(d), size(s)
{}
std::size_t hash = 0;
const char* data = nullptr; // nullptr: the slot is empty
std::size_t size = 0;
};
static std::size_t hash_of(const char* data, std::size_t size) noexcept
{
std::uint64_t h = 0x9E3779B97F4A7C15ULL ^ size;
std::size_t i = 0;
for (; i + 8 <= size; i += 8)
{
std::uint64_t w = 0;
std::memcpy(&w, data + i, 8);
h = (h ^ w) * 0x100000001B3ULL;
h ^= h >> 32u;
}
std::uint64_t w = 0;
if (i < size)
{
std::memcpy(&w, data + i, size - i);
}
h = (h ^ w) * 0x9E3779B97F4A7C15ULL;
return detail::conditional_static_cast<std::size_t>(h ^ (h >> 29u));
}
void grow()
{
std::vector<slot> old(table.size() * 2);
old.swap(table);
const std::size_t mask = table.size() - 1;
for (const auto& s : old)
{
if (s.data != nullptr)
{
std::size_t i = s.hash & mask;
while (table[i].data != nullptr)
{
i = (i + 1) & mask;
}
table[i] = s;
}
}
}
std::vector<slot> table{};
std::size_t used = 0;
const char* last_data = nullptr;
std::size_t last_size = 0;
};
/// @brief the length of the longest common prefix of the first @a limit bytes of @a a and @a b /// @brief the length of the longest common prefix of the first @a limit bytes of @a a and @a b
static std::size_t common_prefix_length(const char* a, const char* b, const std::size_t limit) noexcept static std::size_t common_prefix_length(const char* a, const char* b, const std::size_t limit) noexcept
{ {
@@ -27217,6 +27049,354 @@ class json_pointer
return i; return i;
} }
/*!
@brief the prefixes of a flattened object that are marked as arrays, for
prefixes that are not short
A prefix is identified by the tokens it consists of: a node of a tree
stands for the prefix of its parent followed by a token, and is looked up
by its parent and the text of the token. The node of a prefix is found by
walking the tokens of the key from the root, so identifying all prefixes
of a key together costs one pass over the key, however long the prefixes
are, and no prefix is ever compared byte by byte as a whole. The nodes
along the key that was walked last are kept, and the walk of the next key
starts below the beginning it has in common with that key. The tree refers
to the keys, which must outlive it.
*/
class prefix_tree
{
public:
/// @brief set the seed of the hash function, before anything is added
void reseed(const std::uint64_t seed_value) noexcept
{
seed = seed_value;
}
/// @brief mark the first @a prefix_size bytes of the key of @a key_size bytes at @a data
void mark(const char* data, std::size_t key_size, std::size_t prefix_size)
{
nodes[walk(data, key_size, prefix_size)].marked = true;
any_marked = true;
}
bool is_marked(const char* data, std::size_t key_size, std::size_t prefix_size)
{
return any_marked && nodes[walk(data, key_size, prefix_size)].marked;
}
bool empty() const noexcept
{
return !any_marked;
}
/// @brief the hash of the first @a size bytes at @a data, for the seed @a seed_value
static std::size_t hash_bytes(const char* data, std::size_t size, const std::uint64_t seed_value) noexcept
{
std::uint64_t h = seed_value ^ size;
std::size_t i = 0;
for (; i + 8 <= size; i += 8)
{
std::uint64_t w = 0;
std::memcpy(&w, data + i, 8);
h = (h ^ w) * 0x100000001B3ULL;
h ^= h >> 32u;
}
std::uint64_t w = 0;
if (i < size)
{
std::memcpy(&w, data + i, size - i);
}
h = (h ^ w) * 0x9E3779B97F4A7C15ULL;
return detail::conditional_static_cast<std::size_t>(h ^ (h >> 29u));
}
private:
struct node
{
std::size_t parent = 0;
std::size_t hash = 0;
const char* token = nullptr;
std::size_t token_size = 0;
bool marked = false;
};
/// @brief a slot of the hash table; the index of a node, 0 if the slot is empty
struct bucket
{
std::size_t index = 0;
};
/// @brief the node after a token of the key that was walked last, and where the token ends
struct step
{
std::size_t node = 0;
std::size_t end = 0;
};
/// @brief the index of the node of the prefix that ends at the slash (or the end) at @a prefix_size
std::size_t walk(const char* data, std::size_t key_size, std::size_t prefix_size)
{
if (nodes.empty())
{
nodes.emplace_back();
table.resize(16);
chain.emplace_back();
}
if (data != last_key)
{
// keep the nodes within the beginning that this key has in common
// with the key they were found for; a prefix that ends inside a
// token of this key is not one of its prefixes
const std::size_t same = common_prefix_length(data, last_key, (std::min)(key_size, last_key_size));
std::size_t keep = chain.size();
while (keep > 1 && (chain[keep - 1].end > same || (chain[keep - 1].end == same && same < key_size && data[same] != '/')))
{
--keep;
}
chain.resize(keep);
last_key = data;
last_key_size = key_size;
}
// walk the tokens that are not walked yet
while (chain.back().end < prefix_size && chain.back().end < key_size)
{
const std::size_t start = chain.back().end + 1;
const void* const slash = std::memchr(data + start, '/', key_size - start);
const std::size_t end = slash == nullptr ? key_size : static_cast<std::size_t>(static_cast<const char*>(slash) - data);
step next;
next.node = child(chain.back().node, data + start, end - start);
next.end = end;
chain.push_back(next);
}
if (chain.back().end == prefix_size)
{
return chain.back().node;
}
// an earlier call walked further
const auto it = std::lower_bound(chain.begin(), chain.end(), prefix_size, [](const step & s, std::size_t size)
{
return s.end < size;
});
return it->node;
}
std::size_t slot_of(std::size_t parent, std::size_t hash) const noexcept
{
std::uint64_t x = static_cast<std::uint64_t>(hash) ^ (static_cast<std::uint64_t>(parent) * 0x9E3779B97F4A7C15ULL);
x ^= x >> 32u;
x *= 0xD6E8FEB86659FD93ULL;
x ^= x >> 32u;
return static_cast<std::size_t>(x) & (table.size() - 1);
}
/// @brief the node of the prefix of the node @a parent followed by the token, which is added if it is not there
std::size_t child(std::size_t parent, const char* token, std::size_t token_size)
{
const std::size_t hash = hash_bytes(token, token_size, seed);
std::size_t i = slot_of(parent, hash);
while (table[i].index != 0)
{
const node& n = nodes[table[i].index];
if (n.parent == parent && n.hash == hash && n.token_size == token_size && std::memcmp(n.token, token, token_size) == 0)
{
return table[i].index;
}
i = (i + 1) & (table.size() - 1);
}
node created;
created.parent = parent;
created.hash = hash;
created.token = token;
created.token_size = token_size;
nodes.push_back(created);
table[i].index = nodes.size() - 1;
// keep the load factor below 1/2
if (nodes.size() * 2 > table.size())
{
std::vector<bucket> old(table.size() * 2);
old.swap(table);
for (std::size_t k = 1; k < nodes.size(); ++k)
{
std::size_t j = slot_of(nodes[k].parent, nodes[k].hash);
while (table[j].index != 0)
{
j = (j + 1) & (table.size() - 1);
}
table[j].index = k;
}
}
return nodes.size() - 1;
}
std::uint64_t seed = 0;
/// @brief the nodes; the first is the root, the empty prefix
std::vector<node> nodes{};
/// @brief the nodes (not the root) in a hash table
std::vector<bucket> table{};
/// @brief the root, and the node after each token of the key that was walked last
std::vector<step> chain{};
const char* last_key = nullptr;
std::size_t last_key_size = 0;
bool any_marked = false;
};
/*!
@brief the pointer prefixes of a flattened object that denote arrays
@ref unflatten creates arrays exactly below the prefixes that have a
reference token 0 among their children, and objects everywhere else.
Deciding this up front keeps the result independent of the order in which
the flattened object is iterated, which is unspecified for some object
types.
A prefix is identified by the text of the key it is the beginning of:
escaping is unambiguous, so equal prefixes of valid keys are equal texts.
The set refers to the keys, which must outlive it. Short prefixes are
kept in a hash table and compared as texts, which costs at most the length
of the bound. Longer prefixes are kept in a @ref prefix_tree, because
hashing and comparing every one of the prefixes of a key with many tokens
from its beginning would take quadratic time.
The hash function depends on a seed that is derived from the address of a
local variable, which address space layout randomization changes between
processes, so keys cannot be crafted to collide in advance; the result
does not depend on the seed. Where the addresses are not randomized, or
when the seed is known, keys can collide: k short prefixes then cost
k^2 / 2 comparisons of fewer than 64 bytes each. The long prefixes are not
hashed as a whole.
*/
class array_prefix_set
{
public:
/// @brief choose the seed of the hash function, before anything is added: it is derived from the address that is passed
void reseed(const void* address) noexcept
{
// NOLINTNEXTLINE(cppcoreguidelines-pro-type-reinterpret-cast): the address is only a source of entropy
std::uint64_t x = static_cast<std::uint64_t>(reinterpret_cast<std::uintptr_t>(address)) ^ 0x9E3779B97F4A7C15ULL;
x *= 0xBF58476D1CE4E5B9ULL;
seed = x ^ (x >> 31u);
tree.reseed(seed);
}
/// @brief add the first @a prefix_size bytes of the key of @a key_size bytes at @a data
void insert(const char* data, std::size_t key_size, std::size_t prefix_size)
{
if (prefix_size >= short_limit)
{
tree.mark(data, key_size, prefix_size);
return;
}
// flattened objects are usually sorted, so most keys that have a
// 0 yield the prefix of the previous one
if (last_data != nullptr && last_size == prefix_size && std::memcmp(last_data, data, prefix_size) == 0)
{
return;
}
last_data = data;
last_size = prefix_size;
const std::size_t hash = prefix_tree::hash_bytes(data, prefix_size, seed);
if (table.empty())
{
table.resize(16);
}
const std::size_t mask = table.size() - 1;
std::size_t i = hash & mask;
while (table[i].data != nullptr)
{
if (table[i].hash == hash && table[i].size == prefix_size && std::memcmp(table[i].data, data, prefix_size) == 0)
{
return;
}
i = (i + 1) & mask;
}
table[i] = slot(hash, data, prefix_size);
// keep the load factor below 1/2
if (++used * 2 > table.size())
{
grow();
}
}
bool empty() const noexcept
{
return used == 0 && tree.empty();
}
/// @brief whether the first @a prefix_size bytes of the key of @a key_size bytes at @a data were added
bool contains(const char* data, std::size_t key_size, std::size_t prefix_size)
{
if (prefix_size >= short_limit)
{
return tree.is_marked(data, key_size, prefix_size);
}
if (used == 0)
{
return false;
}
const std::size_t hash = prefix_tree::hash_bytes(data, prefix_size, seed);
const std::size_t mask = table.size() - 1;
for (std::size_t i = hash & mask; table[i].data != nullptr; i = (i + 1) & mask)
{
if (table[i].hash == hash && table[i].size == prefix_size && std::memcmp(table[i].data, data, prefix_size) == 0)
{
return true;
}
}
return false;
}
private:
/// @brief prefixes of fewer bytes are kept in the hash table
static constexpr std::size_t short_limit = 64;
struct slot
{
slot() noexcept = default;
slot(std::size_t h, const char* d, std::size_t s) noexcept
: hash(h), data(d), size(s)
{}
std::size_t hash = 0;
const char* data = nullptr; // nullptr: the slot is empty
std::size_t size = 0;
};
void grow()
{
std::vector<slot> old(table.size() * 2);
old.swap(table);
const std::size_t mask = table.size() - 1;
for (const auto& s : old)
{
if (s.data != nullptr)
{
std::size_t i = s.hash & mask;
while (table[i].data != nullptr)
{
i = (i + 1) & mask;
}
table[i] = s;
}
}
}
std::uint64_t seed = 0;
prefix_tree tree{};
std::vector<slot> table{};
std::size_t used = 0;
const char* last_data = nullptr;
std::size_t last_size = 0;
};
/*! /*!
@brief check that @a key is a valid JSON pointer, and add the prefixes of @brief check that @a key is a valid JSON pointer, and add the prefixes of
it that denote arrays to @a arrays it that denote arrays to @a arrays
@@ -27262,7 +27442,7 @@ class json_pointer
// a token 0 makes the pointer before it an array // a token 0 makes the pointer before it an array
if (i - begin == 1 && data[begin] == '0') if (i - begin == 1 && data[begin] == '0')
{ {
arrays.insert(data, begin - 1); arrays.insert(data, size, begin - 1);
} }
begin = i + 1; begin = i + 1;
} }
@@ -28272,6 +28452,7 @@ class json_pointer
// token 0 among their children; the values below them are arrays, // token 0 among their children; the values below them are arrays,
// all others are objects (see array_prefix_set) // all others are objects (see array_prefix_set)
array_prefix_set arrays; array_prefix_set arrays;
arrays.reseed(&arrays);
const string_t* previous_key = nullptr; const string_t* previous_key = nullptr;
for (const auto& element : *value.m_data.m_value.object) for (const auto& element : *value.m_data.m_value.object)
{ {
@@ -28363,7 +28544,7 @@ class json_pointer
case detail::value_t::null: case detail::value_t::null:
{ {
// a first child 0 makes the value an array without a look-up // a first child 0 makes the value an array without a look-up
if ((token_size == 1 && data[pos + 1] == '0') || arrays.contains(data, pos)) if ((token_size == 1 && data[pos + 1] == '0') || arrays.contains(data, key.size(), pos))
{ {
// some reference token below this position is 0, so the // some reference token below this position is 0, so the
// value is an array // value is an array
-10
View File
@@ -364,16 +364,6 @@ json_test_add_test_for(src/unit-class_parser.cpp
MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force} MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
) )
# test the conversions again without std::filesystem::path support: a
# std::u8string must be a JSON string in this configuration, too
json_test_set_test_options(test-conversions2_no_filesystem
COMPILE_DEFINITIONS JSON_HAS_FILESYSTEM=0 JSON_HAS_EXPERIMENTAL_FILESYSTEM=0
)
json_test_add_test_for(src/unit-conversions2.cpp
NAME test-conversions2_no_filesystem
MAIN test_main CXX_STANDARDS ${test_cxx_standards} ${test_force}
)
# test diagnostic positions again without regular diagnostics (JSON pointer paths) # test diagnostic positions again without regular diagnostics (JSON pointer paths)
json_test_set_test_options(test-diagnostic-positions_only json_test_set_test_options(test-diagnostic-positions_only
COMPILE_DEFINITIONS JSON_DIAGNOSTICS=0 COMPILE_DEFINITIONS JSON_DIAGNOSTICS=0
-16
View File
@@ -536,20 +536,4 @@ TEST_CASE("alternative string type with json_view")
} }
} }
// a std::u8string is a JSON string, whatever the string type of the JSON value
// JSON_HAS_CPP_20 JSON_HAS_CPP_23 (do not remove; see note at top of file)
#if defined(__cpp_lib_char8_t)
TEST_CASE("alternative string type and std::u8string")
{
const std::u8string s = u8"abc";
const alt_json j = s;
CHECK(j.is_string());
CHECK(j.get<alt_string>() == alt_string("abc"));
CHECK(j.get<std::u8string>() == s);
// the array of code units written by versions before 3.13.0
CHECK(alt_json::array({0x61, 0x62, 0x63}).get<std::u8string>() == s);
}
#endif
DOCTEST_CLANG_SUPPRESS_WARNING_POP DOCTEST_CLANG_SUPPRESS_WARNING_POP
+16 -94
View File
@@ -27,12 +27,10 @@ using nlohmann::json;
#include <deque> #include <deque>
#include <forward_list> #include <forward_list>
#include <list> #include <list>
#include <map>
#include <set> #include <set>
#include <unordered_map> #include <unordered_map>
#include <unordered_set> #include <unordered_set>
#include <valarray> #include <valarray>
#include <vector>
// NLOHMANN_JSON_SERIALIZE_ENUM uses a static std::pair // NLOHMANN_JSON_SERIALIZE_ENUM uses a static std::pair
DOCTEST_CLANG_SUPPRESS_WARNING_PUSH DOCTEST_CLANG_SUPPRESS_WARNING_PUSH
@@ -709,12 +707,23 @@ TEST_CASE("std::filesystem::path")
} }
#endif #endif
// a std::u8string is a JSON string since 3.13.0 (it was an array of code units // the ADL to_json overload for std::u8string only exists under the same guard
// before); independent of whether std::filesystem::path is supported, see the // as std::filesystem::path support (it is otherwise only reached indirectly,
// test-conversions2_no_filesystem target // via std::filesystem::path::u8string()) -- mirror both #if conditions from
// JSON_HAS_CPP_20 JSON_HAS_CPP_23 (do not remove; see note at top of file) // include/nlohmann/detail/conversions/to_json.hpp exactly
#if JSON_HAS_FILESYSTEM || JSON_HAS_EXPERIMENTAL_FILESYSTEM
#if defined(__cpp_lib_char8_t) #if defined(__cpp_lib_char8_t)
TEST_CASE("std::u8string") TEST_CASE("std::u8string")
{
SECTION("ascii")
{
const std::u8string s = u8"Path";
json const j = s;
CHECK(j.template get<std::string>() == "Path");
}
SECTION("utf-8")
{ {
// use \u universal-character-names (rather than raw \x byte escapes // use \u universal-character-names (rather than raw \x byte escapes
// or literal non-ASCII source bytes) to compose the multi-byte UTF-8 // or literal non-ASCII source bytes) to compose the multi-byte UTF-8
@@ -723,100 +732,13 @@ TEST_CASE("std::u8string")
// our CI configs promote to an error; \u is portable and produces // our CI configs promote to an error; \u is portable and produces
// the exact same encoded bytes without depending on the source // the exact same encoded bytes without depending on the source
// file's encoding // file's encoding
const std::u8string utf8 = u8"P\u011B\u0161ina"; const std::u8string s = u8"P\u011B\u0161ina";
SECTION("ascii")
{
const std::u8string s = u8"Path";
json const j = s; json const j = s;
CHECK(j.is_string());
CHECK(j.template get<std::string>() == "Path");
}
SECTION("utf-8")
{
json const j = utf8;
CHECK(j.is_string());
CHECK(j.template get<std::string>() == "P\xc4\x9b\xc5\xa1ina"); CHECK(j.template get<std::string>() == "P\xc4\x9b\xc5\xa1ina");
} }
SECTION("round trip")
{
json const j = utf8;
CHECK(j.template get<std::u8string>() == utf8);
std::u8string back;
j.get_to(back);
CHECK(back == utf8);
// from a string
json const j_string = "P\xc4\x9b\xc5\xa1ina";
CHECK(j_string.template get<std::u8string>() == utf8);
// empty, and with an embedded NUL
CHECK(json(std::u8string()).template get<std::u8string>().empty());
const std::u8string with_nul(u8"a\0b", 3);
CHECK(json(with_nul).template get<std::u8string>() == with_nul);
// the lvalue and rvalue paths, and in containers
std::u8string lvalue = utf8;
CHECK(json(lvalue).template get<std::u8string>() == utf8);
CHECK(json(std::move(lvalue)).template get<std::u8string>() == utf8);
const std::vector<std::u8string> vec = {utf8, u8"x"};
json const j_vec = vec;
CHECK(j_vec.is_array());
CHECK(j_vec[0].is_string());
CHECK(j_vec.template get<std::vector<std::u8string>>() == vec);
const std::map<std::string, std::u8string> map = {{"k", utf8}};
CHECK(json(map).template get<std::map<std::string, std::u8string>>() == map);
} }
SECTION("array of code units (written by versions before 3.13.0)")
{
json const j = json::array({0x50, 0xC4, 0x9B, 0xC5, 0xA1, 0x69, 0x6E, 0x61});
CHECK(j.template get<std::u8string>() == utf8);
CHECK(json::array().template get<std::u8string>().empty());
CHECK(json::parse("[97, 98]").template get<std::u8string>() == u8"ab");
std::u8string s = u8"overwritten";
j.get_to(s);
CHECK(s == utf8);
}
SECTION("other types")
{
#if !defined(JSON_NOEXCEPTION)
CHECK_THROWS_WITH_AS(json(1).template get<std::u8string>(), "[json.exception.type_error.302] type must be string or array, but is number", json::type_error);
CHECK_THROWS_WITH_AS(json(nullptr).template get<std::u8string>(), "[json.exception.type_error.302] type must be string or array, but is null", json::type_error);
CHECK_THROWS_AS(json::object().template get<std::u8string>(), json::type_error);
// an element that is not a number
CHECK_THROWS_AS(json::array({"a"}).template get<std::u8string>(), json::type_error);
#endif #endif
}
SECTION("ordered_json")
{
nlohmann::ordered_json const j = utf8;
CHECK(j.is_string());
CHECK(j.template get<std::string>() == "P\xc4\x9b\xc5\xa1ina");
CHECK(j.template get<std::u8string>() == utf8);
CHECK(nlohmann::ordered_json::array({0x61, 0x62}).template get<std::u8string>() == u8"ab");
}
SECTION("std::u8string_view and char8_t arrays are unchanged (arrays of code units)")
{
const std::u8string_view view = utf8;
json const j_view = view;
CHECK(j_view.is_array());
CHECK(j_view.size() == 8);
const char8_t arr[] = u8"ab";
json const j_arr = arr;
CHECK(j_arr == json::array({0x61, 0x62, 0}));
}
}
#endif #endif
#if !defined(JSON_NOEXCEPTION) #if !defined(JSON_NOEXCEPTION)
+293
View File
@@ -23,8 +23,10 @@ using nlohmann::json;
using namespace nlohmann::literals; // NOLINT(google-build-using-namespace) using namespace nlohmann::literals; // NOLINT(google-build-using-namespace)
#endif #endif
#include <algorithm>
#include <cerrno> #include <cerrno>
#include <cstdlib> #include <cstdlib>
#include <ctime>
#include <limits> #include <limits>
#include <map> #include <map>
#include <random> #include <random>
@@ -1560,3 +1562,294 @@ TEST_CASE("JSON patch with moves and copies")
CHECK_THROWS_AS(inplace.patch_inplace(json::parse(R"([{"op":"move","from":"","path":""}])")), json::out_of_range&); CHECK_THROWS_AS(inplace.patch_inplace(json::parse(R"([{"op":"move","from":"","path":""}])")), json::out_of_range&);
CHECK(inplace == doc); CHECK(inplace == doc);
} }
namespace
{
// the keys of a shape of flattened objects with long keys; `zero` is the
// token that is repeated `m` times
// 0: one key, 1: one `zero` followed by tokens 1, 2: the token 1 followed by
// tokens `zero`, 3 and 4: two keys with a long prefix, apart from other keys,
// 5: the same for two long branches, 6: more of the keys of 3
std::vector<std::string> shape_keys(const int shape, const std::size_t m, const std::string& zero)
{
std::string repeated;
for (std::size_t i = 0; i < m; ++i)
{
repeated += "/" + zero;
}
std::vector<std::string> keys;
switch (shape)
{
case 0:
keys.push_back(repeated);
break;
case 1:
{
std::string key = "/" + zero;
for (std::size_t i = 1; i < m; ++i)
{
key += "/1";
}
keys.push_back(key);
break;
}
case 2:
{
std::string key = "/1";
for (std::size_t i = 1; i < m; ++i)
{
key += "/" + zero;
}
keys.push_back(key);
break;
}
case 3:
case 4:
keys = {repeated + "/a0", "/10", repeated + "/a1", "/11"};
break;
case 5:
keys = {"/x" + repeated + "/a0", "/y" + repeated + "/a0", "/x" + repeated + "/a1", "/y" + repeated + "/a1"};
break;
case 6:
for (int j = 0; j < 4; ++j)
{
keys.push_back(repeated + "/a" + std::to_string(j));
keys.push_back("/1" + std::to_string(j));
}
break;
default:
break;
}
return keys;
}
// the best of `runs` times in seconds that std::clock() measures to unflatten the keys,
// which an ordered_json holds in the order they are given (shape 4 uses a
// json, which sorts them)
double unflatten_cpu_time(const int shape, const std::size_t m, const int runs, const std::string& zero)
{
const std::vector<std::string> keys = shape_keys(shape, m, zero);
nlohmann::ordered_json ordered = nlohmann::ordered_json::object();
json sorted = json::object();
for (const auto& key : keys)
{
ordered[key] = 1;
sorted[key] = 1;
}
double best = 1e30;
for (int i = 0; i < runs; ++i)
{
const std::clock_t start = std::clock();
if (shape == 4)
{
const json nested = sorted.unflatten();
}
else
{
const nlohmann::ordered_json nested = ordered.unflatten();
}
best = (std::min)(best, static_cast<double>(std::clock() - start) / static_cast<double>(CLOCKS_PER_SEC));
}
return best;
}
} // namespace
TEST_CASE("unflatten of keys with many reference tokens")
{
using nlohmann::ordered_json;
SECTION("which prefixes become arrays")
{
// sorted keys that share a long beginning
CHECK(json({{"/x/y/q/1", 5}, {"/x/y/w/0", 4}, {"/x/y/w/1", 3}, {"/x/y/z/0", 1}, {"/x/y/z/1", 2}}).unflatten() ==
json::parse(R"({"x":{"y":{"q":{"1":5},"w":[4,3],"z":[1,2]}}})"));
// prefixes that differ in the position of a slash only
CHECK(json({{"/a/0/x", 1}, {"/a/1/y", 3}, {"/ab/1", 2}}).unflatten() ==
json::parse(R"({"a":[{"x":1},{"y":3}],"ab":{"1":2}})"));
CHECK(json({{"/a/b/1", 1}, {"/ab/0", 2}}).unflatten() ==
json::parse(R"({"a":{"b":{"1":1}},"ab":[2]})"));
// tokens longer than one word, escapes, and a token 0 below a token 1
const std::string t = "token_with_more_than_eight_bytes";
CHECK(json({{"/" + t + "/1/b/0", 1}, {"/" + t + "/0", 2}, {"/" + t + "/2/a~1b", 3}}).unflatten() ==
json::parse(R"({"token_with_more_than_eight_bytes":[2,{"b":[1]},{"a/b":3}]})"));
// prefixes of more than 64 bytes, that share a long beginning
std::string deep;
json expected = {{"a", {1, 2}}, {"b", {{"1", 3}}}, {"c", {{"1", {{"x", {4}}}}}}};
for (int i = 0; i < 30; ++i)
{
deep += "/seg";
expected = {{"seg", expected}};
}
CHECK(json({{deep + "/c/1/x/0", 4}, {deep + "/a/1", 2}, {deep + "/b/1", 3}, {deep + "/a/0", 1}}).unflatten() == expected);
CHECK(json(ordered_json({{deep + "/c/1/x/0", 4}, {deep + "/a/1", 2}, {deep + "/b/1", 3}, {deep + "/a/0", 1}}).unflatten()) == expected);
CHECK(json(ordered_json({{deep + "/a/1", 2}, {deep + "/a/0", 1}, {deep + "/b/1", 3}, {deep + "/c/1/x/0", 4}}).unflatten()) == expected);
// prefixes of every length around the limit up to which they are hashed directly
for (std::size_t length = 40; length < 90; ++length)
{
const std::string name(length, 'x');
const json flat = {{"/" + name + "/a/0", 1}, {"/" + name + "/a/1", 2}, {"/" + name + "/b/1", 3}, {"/" + name + "/c/1/0", 4}};
CHECK(flat.unflatten() == json({{name, {{"a", {1, 2}}, {"b", {{"1", 3}}}, {"c", {{"1", {4}}}}}}}));
}
// only the parent of a token 0 is an array, however deep the key is
CHECK(json({{"/0/1/1/1", 1}}).unflatten() == json::parse(R"([{"1":{"1":{"1":1}}}])"));
CHECK(json({{"/1/1/1/0", 1}}).unflatten() == json::parse(R"({"1":{"1":{"1":[1]}}})"));
CHECK(json({{"/1/0/1/0", 1}}).unflatten() == json::parse(R"({"1":[{"1":[1]}]})"));
}
SECTION("the result does not depend on the order of the keys")
{
// random documents without empty containers and without the key "0" in
// an object: flatten() and unflatten() are inverse to each other
std::mt19937 gen(20261110); // NOLINT(cert-msc32-c,cert-msc51-cpp,bugprone-random-generator-seed): reproducible
const std::vector<std::string> names = {"a", "b", "ab", "1", "2", "10", "a/b", "a~b", "token_with_more_than_eight_bytes", "x"};
struct builder
{
std::mt19937& gen;
const std::vector<std::string>& names;
json operator()(int depth) const
{
const int kind = std::uniform_int_distribution<int>(0, 9)(gen);
if (depth == 0 || kind < 3)
{
return kind;
}
json result = kind < 6 ? json::array() : json::object();
const int size = std::uniform_int_distribution<int>(1, 4)(gen);
for (int i = 0; i < size; ++i)
{
if (kind < 6)
{
result.push_back((*this)(depth - 1));
}
else
{
result[names[std::uniform_int_distribution<std::size_t>(0, names.size() - 1)(gen)]] = (*this)(depth - 1);
}
}
return result;
}
};
const builder build{gen, names};
for (int round = 0; round < 200; ++round)
{
const json doc = build(6);
const json flat = doc.flatten();
CHECK(flat.unflatten() == doc);
// the same entries in shuffled order, in an object that keeps it
std::vector<std::pair<std::string, json>> entries;
for (const auto& el : flat.items())
{
entries.emplace_back(el.key(), el.value());
}
std::shuffle(entries.begin(), entries.end(), gen);
ordered_json shuffled = ordered_json::object();
for (const auto& e : entries)
{
shuffled[e.first] = e.second;
}
CHECK(json(shuffled.unflatten()) == doc);
}
}
SECTION("keys with long prefixes, in every order")
{
// prefixes of more than 64 bytes that share a long beginning, and
// continue with tokens that start the same way
std::string deep;
for (int i = 0; i < 30; ++i)
{
deep += "/seg";
}
const std::string other = deep.substr(0, 70) + "/x" + deep.substr(70);
std::vector<std::string> keys = {deep + "/a/0", deep + "/ab/1", deep + "/ab/x", deep + "/abc/0/y/0", other + "/b/1/0", deep + "/abc/1"};
std::sort(keys.begin(), keys.end());
// the result for the keys in sorted order, which json iterates in
json sorted = json::object();
for (const auto& key : keys)
{
sorted[key] = 1;
}
const json expected = sorted.unflatten();
CHECK(expected.is_object());
// ordered_json iterates in the order the keys were added
std::vector<std::size_t> order(keys.size());
for (std::size_t i = 0; i < order.size(); ++i)
{
order[i] = i;
}
std::size_t permutations = 0;
bool all_equal = true;
do
{
nlohmann::ordered_json flat = nlohmann::ordered_json::object();
for (const auto i : order)
{
flat[keys[i]] = 1;
}
all_equal = all_equal && json(flat.unflatten()) == expected;
++permutations;
}
while (std::next_permutation(order.begin(), order.end()));
CHECK(permutations == 720);
CHECK(all_equal);
}
SECTION("time is linear in the number of tokens")
{
// A bound in seconds would depend on the machine. Instead, the time is
// compared with the time for the same keys with the token 0 replaced by
// a token that is not a number: there is no array, so no prefix is
// looked up. The ratio is 1 to 3 for a linear algorithm, and between
// 12 and 100 when looking up a prefix takes time proportional to its
// length. The time that std::clock() measures is mostly the time of the
// processor, which a busy machine does not inflate (on MSVC, it is the
// time that has passed), and the best of two or three runs counts.
for (int shape = 0; shape < 7; ++shape)
{
// the shapes with several keys, in an order that does not sort them,
// need more tokens to be slow enough to tell
const bool many = shape == 3 || shape == 5 || shape == 6;
const std::size_t m = many ? 40000 : 10000;
const int runs = many ? 2 : 3;
// a busy machine may spoil one comparison, hardly two
bool linear = false;
double t_array = 0;
double t_object = 0;
for (int attempt = 0; attempt < 2 && !linear; ++attempt)
{
t_array = unflatten_cpu_time(shape, m, runs, "0");
t_object = (std::max)(unflatten_cpu_time(shape, m, runs, "a"), 1e-3);
linear = t_array < 6 * t_object;
}
CAPTURE(shape)
CAPTURE(t_array)
CAPTURE(t_object)
CHECK(linear);
}
// the nesting is as expected: an array exactly below each token 0
const json nested_deep = json::object({{shape_keys(0, 1000, "0")[0], 1}}).unflatten();
std::size_t depth = 0;
for (const json* p = &nested_deep; p->is_array(); p = &p->back())
{
++depth;
}
CHECK(depth == 1000);
const json nested_ones = json::object({{shape_keys(1, 1000, "0")[0], 1}}).unflatten();
CHECK(nested_ones.is_array());
CHECK(nested_ones.back().is_object());
}
}