API Documentation ================= Important Note -------------- When using functions like `mkpath()`, `makepath()`, and `makefifo()`, make sure your `umask()` is correct so you do not accidentally create files and directories accessible to other users than intended. Helper Macros ------------- - `atonum(str)` Convert string to natural number, works for 32-bit non-negative integers. Returns -1 on error. (Uses `strtonum()` internally.) - `blkdev(dev)` Create block device - `chardev(dev)` Create character device - `erase(path)` Erase file/directory with `remove()`. Errors on `stderr` - `erasef(fmt, ...)` Like `erase()` but takes a formatted printf-like string as argument. - `makedir(path)` Create directory, like `mkdir()`. Errors on `stderr` - `makefifo(path)` Create a FIFO, like `mkfifo()`. Errors on `stderr` - `min(a,b)`/`max(a,b)` These macros take care to avoid double evaluation. - `touch(path)` Create a file, or update mtime. Errors on `stderr` - `touchf(fmt, ...)` Like `touch()` but takes a formatted printf-like string as argument. - `S_ISEXEC(mode_t m)` Mysteriously missing from GLIBC - `ISCLR(word,bit)` Is bit in (integer) word cleared? - `ISSET(word,bit)` Is bit in (integer) word set? - `ISOTHER(word,bit)` Are any other bits, except bit, in (integer) word set? - `SETBIT(word,bit)` Set bit in (integer) word. - `CLRBIT(word,bit)` Clear bit in (integer) word. - `NELEMS(array)` Returns the number of elements in an array. From the great book, The Practice of Programming, by Kernighan and Pike. Generic Functions ----------------- - `chomp(str)` Perl like chomp function, chop off last char if newline. - `copyfile(src, dst, len, opt)` Like the shell `cp(1)` and `dd(1),`, can also copy symlinks and preserve the mtime of the source file. The opt argument can be a mask of: - `LITE_FOPT_COPYFILE_SYM (0x01)` - `LITE_FOPT_KEEP_MTIME (0x02)` In releases prior to v2.0 the opt argument was called `symlink`. The APIs are 100% compatible if the value `1` was used to enable the symlink option. - `dir(dir, ext, filter, list, strip)` Wrapper for `scandir()` with optional filter. Returns a list of names: files and directories that must be freed after use. See the unit test for an example, or take a look at `glob(3)`, it's probably what you want anyway. - `fcopyfile(src, dst)` Like `copyfile()` but uses already open `FILE *` pointers. Copies from current file positions to current file positions until EOF. - `fexist(file)` Check for the existence of a file, returns True(1) or False(0). - `fisdir(path)` Check for the existence of a directory, returns True(1) or False(0). - `fopenf(mode, fmt, ...)` and `vfopenf(mode, fmt, ap)` Like `fopen()`, but takes a formatted string as argument. This greatly simplifies operations that usually consist of composing a filename from parts into a dynamic buffer before actually opening the file. > **Notice:** the swapped order of `pathname` and `mode`! - `fremove(fmt, ...)` Like `remove()`, but takes a formatted string as argument. This greatly simplifies operations that usually consist of composing a filename from parts into a dynamic buffer before actually removing the file. - `fsendfile(src, dst, len)` Copy data between file streams, very similar to `fcopyfile()`, but `dst` is allowed to be `NULL` to be able to read and discard `len` bytes from `src`. - `ifconfig(ifname, addr, mask, up)` Basic ifconfig like operations on an interface. Only supports IPv4 addresses. Note that mask is not CIDR notation. - `lfopen(file, sep)`, `lfclose(lf)` LITE file API for parsing UNIX style configuration files like `/etc/protocols` and `/etc/services`. - `lftok(lf)` Read tokens, delimited by `sep`, from file opened with `lfopen()`. - `lfgetkey(lf, key)` Find `key` in file opened with `lfopen()`, return value/argument. - `lfgetint(lf, key)` Wrapper for `lfgetkey()`, returns positive integer value to `key`, or `-1` if `key` is not found. - `fgetint(file, sep, key)` Wrapper for `lfopen()`, `lfgetint()`, and `lfclose()`. Useful for when only reading a single `key` from a file. - `makepath(dir)` Create all components of the specified directory. - `mkpath(dir, mode)` Like `makepath()`, but also takes a `mode_t` permission mode argument. - `fmkpath(mode, fmt, ...)` Like `mkpath()`, but takes a formatted string as argument. > **Notice:** the swapped order of `pathname` and `mode`! - `movefile(src, dst)` Like `copyfile()`, but renames `src` to `dst`, or recreates symlink with the `dst` name. On successful operation the source is removed and the function returns POSIX OK (0). - `pidfile(name)` Create a daemon PID file using either the `name` as a full path, if `name` starts with `/`, or in `_PATH_VARRUN` using `name` as the basename of the application. If `name` is `NULL`, then `__progname` is used as the basename. The resulting file name is available to the user as a read-only pointer: extern char *__pidfile_name; Use this function to create a PID file for your daemon when it is ready to receive signals. A client application may poll for the existence of this file, so make sure to have your signal handlers properly setup before calling this function. The PID file is removed when the program exits, using an `atexit()` handler. However, depending on how the program terminates the file may still exist even though the program is no longer running. Calling this function multiple times updates the mtime of the file. Only one `atexit()` handler is created, regardless of the amount of times the function is called. If the file is removed, subsequent calls to this function will recreate the file. See below for a link to OpenBSD man page. - `pidfile_read(pidfile)` Read PID from pid file created by `pidfile()`. - `pidfile_signal(pidfile, signal)` Send signal to PID found in pid file created by `pidfile()`. - `progress(percent, max_width)` Simple ASCII progress bar with a spinner. Start it with `percent=0` and set the `max_width=chars` to indicate width of the progress bar. Called multiple times with the same percentage value cause spinner to spin. - `rsync(src, dst, opt, *filter())` Very simple `rsync()` to copy files and directories recursively. It supports pruning files from the destination tree that do not exist in the source tree and preserving the mtime of the source files. The opt argument can be a mask of: - `LITE_FOPT_RSYNC_DELETE (0x01)` - `LITE_FOPT_KEEP_MTIME (0x02)` In releases prior to v2.0 the argument controlling pruning was called `delete`, it is now called `opt`. The APIs are 100% compatible if the value `1` was used. - `runbg(cmd, delay)` Run a command in the background, after delay microseconds, essentially a background `execvp()` with a delay. The function employs double-fork to prevent zombies and closes all open files, including stdio. ```C char *cmd[] = { "sh", "-c", "echo 'hej' >/tmp/foo", NULL}; runbg(cmd, 200000); /* Create /tmp/foo after 200 millisec */ /* Execution continues here immediately */ ``` - `strmatch(str, list)`, `strnmatch(str, list, len)` Find matching string in an array of strings. Returns index in array on match, or `-1` on error or not found. `strnmatch()` takes an extra arg to compare only `len` number of characters from `str`. - `strtrim(str)` Trims a string from any leading and trailing white-space, returns the trimmed result in the same buffer. - `systemf(fmt, ...)` Like `system()`, but takes a formatted string as argument. This greatly simplifies operations that usually consist of composing a command from parts into a dynamic buffer before calling it. - `telnet_open(addr, port), telnet_close(ctx), telnet_expect(ctx, script, output)` Poor mans telnet expect in C. Opens connection to a Telnet service; FTP, Telnet, similar, and run an expect-like script. - `telnet_session(addr, port, script output)` Wrapper for the above three in one API. - `tempfile()` Secure replacement for `tmpfile()`. Creates an invisible temporary file in `/tmp` that is removed when the returned `FILE` pointer is closed. **Note:** Requires Linux v3.11, or later, will fall back to the old and unsafe `tmpfile()` on older systems. - `truncatef(length, fmt, ...)` Like `truncate()`, but takes a formatted string as argument. This simplifies some operations when the filename otherwise have to be composed from parts into a separate array before calling the real function. - `which(cmd)`, `whichp(cmd)` C implementation of UNIX which(1). Returns a malloc'ed string with the full path to `cmd` on success, otherwise `NULL`. `whichp()` is a predicate function, returns `TRUE` or `FALSE`. **Note:** `which("/bin/ps aux")` will return `/bin/ps`, or `TRUE`, provided of course `/bin/ps` exists. - `yorn(fmt, ...)` Pose a question to user, appended with `(y/N)?`, returns `TRUE` for yes (both `y` and `Y` are handled) and `FALSE` for everything else. Procfile Functions ------------------ These functions can be used to simplify access to data in `/proc` and `/sys` on a Linux system. ### String Functions - `readsnf(line, len, fmt, ...)` Read first line from a file composed from `fmt`, with optional args. At most `len` bytes from the file are stored in `line`. On success this function returns `line` with any trailing newlines `chomp()`ed off. On error `NULL` is returned. - `vreadsnf(line, len, fmt, ap)` Similar to `readsnf()` but takes a `va_list` argument instead. - `writesf(str, mode, fmt, ...)` Write the string buffer `str`, with an additional newline, to a file composed from `fmt`, with optional args. The file is opened with the given `mode`, e.g. "w+", which allows for both replacing and appending file content. The function returns POSIX OK(0) on success or -1 on failure with the `errno` variable set to a value from either `fopen()` or `fclose()`. ### Integer Functions Read and write 32-bit and 64-bit signed values from/to files. - `vreadllf(value, fmt, ap)` and `readllf(value, fmt, ...)` Only the first line is read. If the line has newline that is stripped before calling `strtoll()` on the line. The arguments to the latter function is such that it can convert also from a hexadecimal value. This function may fail and return -1 on opening the file, reading a line, or if the `strtoll()` function fails. All of which set the `errno` variable. Otherwise this function return POSIX OK(0). - `readdf(value, fmt, ...)` Read a signed 32-bit value from a file composed from `fmt`, with optional args. This function use `vreadllf()` with an additional range checking for `INT_MIN` and `INT_MAX`. Values outside that cause this function to return -1 with `errno` set to `ERANGE`. - `writedf(value, mode, fmt, ...)` Write a signed 32-bit `value` to a file composed from `fmt`, with optional args. The file is opened with the given `mode`, e.g. "w+", which allows for both replacing and appending file content. The function returns POSIX OK(0) on success or -1 on failure with the `errno` variable set to a value from either `fopen()` or `fclose()`. - `writellf(value, mode, fmt, ...)` Write a signed 64-bit `value` to a file composed from `fmt`, with optional args. The file is opened with the given `mode`, e.g. "w+", which allows for both replacing and appending file content. The function returns POSIX OK(0) on success or -1 on failure with the `errno` variable set to a value from either `fopen()` or `fclose()`. GNU Functions ------------- The following are useful GNU functions, that do not exist on *BSD, and some other platforms. - `strdupa(str)` http://man7.org/linux/man-pages/man3/strdupa.3.html - `strndupa(str)` http://man7.org/linux/man-pages/man3/strndupa.3.html - `strnlen(str, lim)` http://man7.org/linux/man-pages/man3/strnlen.3.html OpenBSD/NetBSD/FreeBSD Functions -------------------------------- The following are popular functions and highly useful macros from the *BSD world of UNIX that are sadly missing on Linux. - `fparseln(fp, *len, *lineno, delim, flags)` http://man.openbsd.org/OpenBSD-current/man3/fparseln.3 - `pidfile(basename)` http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/pidfile.3 **Note:** the version of `pidfile()` in -lite has been extended to handle it being called multiple times, i.e. to not create multiple `atexit()` handlers, and also to export a few internal paths: - `__pidfile_path`: prefix path, default `_PATH_VARRUN`. Notice the trailing slash requirement if you want to override it! - `__pidfile_name`: full path to PID file , similar to `__progname`. See previous section for details. - `reallocarray(ptr, nmemb, size)` http://man.openbsd.org/OpenBSD-current/man3/reallocarray.3 - `strlcpy(dst, src, len)` http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/strlcpy.3 - `strlcat(dst, src, len)` http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/strlcat.3 - `strtonum()` http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/strtonum.3 - `sys/queue.h` API http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/LIST_EMPTY.3 - `sys/tree.h` API Niels Provos' famous splay and red-black tree implementation. http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/SPLAY_FOREACH.3