From 03f637a8119e4dd701dd140d2ec63586b4d15ee7 Mon Sep 17 00:00:00 2001 From: Sergei Bulatov Date: Tue, 14 Mar 2023 22:15:57 +0700 Subject: [PATCH] release --- configs/SuperMicro/X8DTL-I.conf | 46 ++++++++++++++++++++++++++++----- 1 file changed, 39 insertions(+), 7 deletions(-) diff --git a/configs/SuperMicro/X8DTL-I.conf b/configs/SuperMicro/X8DTL-I.conf index 1cc426be..b6c17a39 100644 --- a/configs/SuperMicro/X8DTL-I.conf +++ b/configs/SuperMicro/X8DTL-I.conf @@ -1,11 +1,14 @@ # Config for a Supermicro X8DTL-I -# Authors: Steve-Tech, renardein +# Sensors guessed from HWiNFO +# Originally written by Steve-Tech and renardein # Based on Supremicro X8DTN, C7X58 and HP N40L configurations # Also compatible with all X8DTL-* motherboards -# Created: 3 March 2023 +# 2 March 2023 # Modules: # w83795 +# coretemp +# jc42 # Board has two sensor chips, w83627dhg is not used for temperature, # fans or voltage sensing. sensors-detect will suggest that you load the @@ -44,7 +47,6 @@ chip "w83795adg-i2c-0-2f" compute in5 @*4, @/4 compute in6 @*6.62, @/6.62 compute in7 -@*8, -@/8 - # Voltage Limits # CPU set in0_min 0.82 @@ -53,9 +55,9 @@ chip "w83795adg-i2c-0-2f" set in1_max 1.35 #DIMM set in2_min 1.35 - set in2_max 1.5 + set in2_max 1.55 set in3_min 1.35 - set in3_max 1.5 + set in3_max 1.55 #+3.3V set in12_min 3.135 set in12_max 3.465 @@ -68,8 +70,11 @@ chip "w83795adg-i2c-0-2f" set in6_min 11.400 set in6_max 12.600 set in7_min 10.800 - set in7_max 13.200 - + set in7_max 13.200 + #VTT Fix + # The BIOS does not set the correct limits for VTT, but it is wired. + set in11_min 1.00 + set in11_max 1.25 #FAN Limits set fan1_min 700 set fan2_min 700 @@ -78,6 +83,33 @@ chip "w83795adg-i2c-0-2f" set fan5_min 700 set fan6_min 700 +#config for coretemp 1 +chip "coretemp-isa-0000" + label temp2 "CPU 1 Core 1" + label temp3 "CPU 1 Core 2" + label temp4 "CPU 1 Core 3" + label temp5 "CPU 1 Core 4" + label temp6 "CPU 1 Core 5" + label temp7 "CPU 1 Core 6" + +#config for coretemp 2 +chip "coretemp-isa-0001" + label temp2 "CPU 2 Core 1" + label temp3 "CPU 2 Core 2" + label temp4 "CPU 2 Core 3" + label temp5 "CPU 2 Core 4" + label temp6 "CPU 2 Core 5" + label temp7 "CPU 2 Core 6" + #config for intel5500 chip "intel5500-pci-00a3" label temp1 "Chipset" +#config for DIMM's +chip "jc42-i2c-0-1a" + label temp1 "DIMM0 Temp" + +chip "jc42-i2c-0-18" + label temp1 "DIMM2 Temp" + +chip "jc42-i2c-0-1c" + label temp1 "DIMM4 Temp" \ No newline at end of file