mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-21 19:51:45 +00:00
(mds)
From: Aurelien Jarno <aurelien@aurel32.net> Hello, I have to use the pcf8574 chip with my I2C interface, however, the pcf8574 drivers in lm-sensors is a bit basic. It supposes the pin P1 is used as an input and the others pin as outputs. Attached is a patch which corrects that, providing to files in /proc interface, one for writting, the other for reading. It also modifies a bit the driver to support the pcf8574a (it is a pcf8574 with a different address range), and add a documentation file in doc/chips. The patch also includes some cosmetic changes in the pcf8591 driver I wrote previously, that is to say it modify the chip name in some places I had forgotten to change when I made a copy/paste from another driver. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1318 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
1 parent
877bf15087
commit
0442f73da9
6 files changed
+161
-29
No files matched your search
+1
-1
@@ -162,7 +162,7 @@ ltc1710
|
||||
matorb
|
||||
Matrix Orbital LCD displays
|
||||
|
||||
pcf8574
|
||||
pcf8574 & pcf8574a
|
||||
Simple eight-bit parallel I/O
|
||||
|
||||
pcf8591
|
||||
|
||||
@@ -0,0 +1,97 @@
|
||||
Kernel driver `pcf8574.o'
|
||||
========================
|
||||
|
||||
Status: Status: Complete;
|
||||
|
||||
Supported chips:
|
||||
* Philips PCF8574
|
||||
Prefix: `pcf8574'
|
||||
Addresses scanned: I2C 0x20 - 0x27 (inclusive)
|
||||
Datasheet: Publicly available at the Philips Semiconductor website
|
||||
http://semiconductors.philips.com/
|
||||
|
||||
* Philips PCF8574A
|
||||
Prefix: `pcf8574a'
|
||||
Addresses scanned: I2C 0x38 - 0x3f (inclusive)
|
||||
Datasheet: Publicly available at the Philips Semiconductor website
|
||||
http://semiconductors.philips.com/
|
||||
|
||||
|
||||
Authors: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>,
|
||||
and Dan Eaton <dan.eaton@rocketlogix.com>
|
||||
|
||||
Module Parameters
|
||||
-----------------
|
||||
|
||||
* force: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to boldly assume to be present
|
||||
* force_pcf8574: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs which are unquestionably assumed to
|
||||
contain a `pcf8574' chip
|
||||
* ignore: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs not to scan
|
||||
* ignore_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples not to scan
|
||||
* probe: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to scan additionally
|
||||
* probe_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples to scan additionally
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
The PCF8574(A) is an 8-bit I/O expander for the I2C bus produced by Philips
|
||||
Semiconductors. It is designed to provide a byte I2C interface to up to 16
|
||||
separate devices (8 x PCF8574 and 8 x PCF8574A).
|
||||
|
||||
This device consists of a quasi-bidirectionnal port. Each of the eight I/Os
|
||||
can be independently used as an input or output. To setup an I/O as an
|
||||
input, you have to write a 1 to the corresponding output.
|
||||
|
||||
For more informations see the datasheet.
|
||||
|
||||
|
||||
Accessing PCF8574(A) via /proc interface
|
||||
-------------------------------------
|
||||
|
||||
! Be careful !
|
||||
The PCF8574(A) is plainly impossible to detect ! Stupid chip.
|
||||
So every chip with adress in the interval [20..27] and (38..3f) are
|
||||
detected as PCF8574(A). If you have other chips in this address
|
||||
range, the workaround is to load this module after the one
|
||||
for your others chips.
|
||||
|
||||
On detection (i.e. insmod, modprobe et al.), directories are being
|
||||
created for each detected PCF8574(A):
|
||||
|
||||
/proc/sys/dev/sensors/pcf8574-<0>-<1>/
|
||||
where <0> is the bus the chip was detected on (e. g. i2c-0)
|
||||
and <1> the chip address ([20..27] or [38..3f]):
|
||||
./pcf8574-i2c-0-27/
|
||||
|
||||
Inside these directories, there are two files each:
|
||||
read and write.
|
||||
|
||||
The read file is read-only. Reading gives you the current I/O input
|
||||
if the corresponding output is set as 1, otherwise the current output
|
||||
value, that is to say 0.
|
||||
|
||||
The write file is read/write. Writing a value outputs it on the I/O
|
||||
port. Reading return the last written value.
|
||||
|
||||
On module initialization the chip is configured as eight I/Os input (all
|
||||
outputs to 1), so you can connect any circuit to the PCF8574(A) without
|
||||
to be afraid of short-circuit.
|
||||
|
||||
|
||||
Chip Features
|
||||
-------------
|
||||
|
||||
Chip `pcf8574'
|
||||
LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE
|
||||
read NONE NONE R 0
|
||||
write NONE NONE RW 0
|
||||
|
||||
LABEL FEATURE SYMBOL SYSCTL FILE:OFFSET
|
||||
read SENSORS_PCF8591_READ read:1
|
||||
write SENSORS_PCF8591_WRITE write:1
|
||||
Reference in new issue
Block a user