From 07575dbb7f2d3d1e3fbc2ad531e8613596c47f85 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 24 Apr 2004 08:10:16 +0000 Subject: [PATCH] Update via686a section, new lm99 section. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2470 7894878c-1315-0410-8ee3-d5d059ff63e0 --- etc/sensors.conf.eg | 46 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 36 insertions(+), 10 deletions(-) diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg index a841cd93..e1c6ff7f 100644 --- a/etc/sensors.conf.eg +++ b/etc/sensors.conf.eg @@ -1014,7 +1014,9 @@ chip "via686a-*" # conversion info). So, you may wish to 'ignore temp3'. # Johannes Drechsel-Burkhard notes that on his MSI K7T Pro, -# temp1 is the CPU temp and temp2 is the SYS temp. +# temp1 is the CPU temp and temp2 is the SYS temp. Hugo van der Merwe notes +# the same for his Gigabyte GA-7DXC, and Olivier Martin for his Gigabyte +# GA-7ZM. label temp1 "SYS Temp" label temp2 "CPU Temp" @@ -1049,15 +1051,6 @@ chip "via686a-*" #set fan1_min 5000 #set fan2_min 5000 -# For at least one Tyan S1598, the following corrections make the sensors -# readings more in-line with the BIOS readings on boot. Try these, and -# adjust as necessary. - - #compute "2.0V" 1.02*@ , @/1.02 - #compute "3.3V" 1.02*@ , @/1.02 - #compute "5.0V" 1.009*@ , @/1.009 - #compute "12V" 1.04*@ , @/1.04 - chip "mtp008-*" @@ -1727,6 +1720,39 @@ chip "lm90-*" "adm1032-*" # never exceed this value # set hyst1 70 +chip "lm99-*" + + label temp1 "G/C Temp" + label temp2 "GPU Temp" + label tcrit1 "G/C Crit" + label tcrit2 "GPU Crit" + +# note #1: only the LM99 needs this; for a LM89, comment the compute line +# out +# note #2: there is no way for us to differenciate between a LM89 and a +# LM99; you have to know what you have; LM99 are frequently found on +# graphics cards, most notably nVidia ones + compute temp2 @+16, @-16 + +# change high and low limits to fit your needs +# set temp1_low 10 +# set temp1_high 90 +# set temp2_low 10 +# set temp2_high 100 + +# change critical limits to fit your needs +# should be higher than the corresponding high limit above +# set tcrit1 100 +# set tcrit2 110 + +# change the hysteresis values (to critical limits) to fit your needs +# note #1: hyst2 will be automatically set with the same delta +# note #2: the internal register, which stores a single, relative value +# for both channels, cannot hold values greater than 31, so the delta +# between critical temperatures and respective absolute hysteresis can +# never exceed this value +# set hyst1 105 + chip "vt1211-*" "vt8231-*" # # temp1 and in6 are not implemented in vt1211 / vt8231