mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-21 19:51:45 +00:00
configs: Bulk config recovery from archive.org (Part 1)
This is a bulk recovery of the sensor configs found at https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations The config sections themselves are unaltered, but I've selectively added some, but not all of the extra info around them. Anywhere there's been extra info added, it should be in comments at the top of the config, followed by a double newline to indicate the separation. Attribution has been retained where possible, but links to the mailing list are hosed, so goto the above archive.org link to check if a config has extra origin notes. [groeck: reformatted description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
1 parent
24dab30d23
commit
1398ef0201
87 files changed
+5534
No files matched your search
@@ -0,0 +1,61 @@
|
||||
### Sensors configuration for ASRock G41C-GS motherboard
|
||||
### 2014-02-19, ianp <snailbox88-dev -at- yahoo -dot- com>
|
||||
### Thanks to Jean Delvare and Guenter Roeck
|
||||
### Comments are welcome.
|
||||
|
||||
|
||||
chip "w83627dhg-*"
|
||||
|
||||
|
||||
### Voltages
|
||||
|
||||
ignore in1 # Ignored until
|
||||
ignore in4 # properly identified
|
||||
label in5 "+5V"
|
||||
label in6 "+12V"
|
||||
ignore cpu0_vid # Always at 0 in my case, so ignore it
|
||||
|
||||
### Scale +5V and +12V.
|
||||
|
||||
compute in5 @*3, @/3
|
||||
compute in6 @*(1+56/10), @/(1+56/10)
|
||||
|
||||
### Set in0 according to CPU nominal voltage.
|
||||
|
||||
set in0_min 0.8500
|
||||
set in0_max 1.3625
|
||||
set in5_min 5 * 0.95
|
||||
set in5_max 5 * 1.05
|
||||
set in6_min 12 * 0.95
|
||||
set in6_max 12 * 1.05
|
||||
|
||||
### Temperatures
|
||||
|
||||
# temp3 is not identified
|
||||
|
||||
label temp1 "N/B Temp"
|
||||
label temp2 "CPU Temp"
|
||||
|
||||
### Set according to CPU and preference.
|
||||
|
||||
set temp1_max 60
|
||||
set temp1_max_hyst 55
|
||||
set temp2_max 60
|
||||
set temp2_max_hyst 55
|
||||
|
||||
### Fans
|
||||
|
||||
### Ignore fan4 and fan5. There are
|
||||
### only 3 fan connectors on this board.
|
||||
|
||||
label fan1 "POW Fan"
|
||||
label fan2 "CPU Fan"
|
||||
label fan3 "CHA Fan"
|
||||
ignore fan4
|
||||
ignore fan5
|
||||
|
||||
### Set according to preference.
|
||||
|
||||
set fan1_min 0
|
||||
set fan2_min 900
|
||||
set fan3_min 0
|
||||
@@ -0,0 +1,62 @@
|
||||
# Configuration file contributed by Marcus Roeckrath
|
||||
|
||||
# Sample configuration for ASRock K7VT2
|
||||
|
||||
chip "w83697hf-*"
|
||||
|
||||
label in0 "VCore"
|
||||
label in2 "+3.3V"
|
||||
label in3 "+5V"
|
||||
label in4 "+12V"
|
||||
label in5 "-12V"
|
||||
label in6 "-5V"
|
||||
label in7 "V5SB"
|
||||
label in8 "VBat"
|
||||
|
||||
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
||||
compute in4 ((28/10)+1)*@ , @/((28/10)+1)
|
||||
# These are the compute lines for -12V and -5V from the
|
||||
# sample config file sensors.conf.eg from the lm-sensors
|
||||
# source archive.
|
||||
# But these lines give positive values on the K7VT2 board.
|
||||
# compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
|
||||
# compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14
|
||||
# Therefor I use the compute lines for the positive
|
||||
# voltages for the negative voltages also and added a "-"
|
||||
# to get plausible negative values.
|
||||
compute in5 -((28/10)+1)*@ , -@/((28/10)+1)
|
||||
compute in6 -((6.8/10)+1)*@ , -@/((6.8/10)+1)
|
||||
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
|
||||
|
||||
set in0_min 1.5 * 0.95
|
||||
set in0_max 1.65 * 1.05
|
||||
set in2_min 3.3 * 0.95
|
||||
set in2_max 3.3 * 1.05
|
||||
set in3_min 5 * 0.95
|
||||
set in3_max 5 * 1.05
|
||||
set in4_min 12 * 0.95
|
||||
set in4_max 12 * 1.05
|
||||
set in5_min -12 * 0.9
|
||||
set in5_max -12 * 1.1
|
||||
set in6_min -5 * 0.9
|
||||
set in6_max -5 * 1.1
|
||||
set in7_min 5 * 0.95
|
||||
set in7_max 5 * 1.05
|
||||
set in8_min 3.0 * 0.8
|
||||
set in8_max 3.0 * 1.2
|
||||
|
||||
label temp1 "System Temp"
|
||||
label temp2 "CPU Temp"
|
||||
|
||||
set temp1_max 50
|
||||
set temp1_max_hyst 45
|
||||
set temp2_max 52
|
||||
set temp2_max_hyst 47
|
||||
|
||||
label fan1 "CPU Fan"
|
||||
label fan2 "Chassis Fan"
|
||||
|
||||
set fan1_div 4
|
||||
set fan1_min 2000
|
||||
set fan2_div 8
|
||||
set fan2_min 1000
|
||||
@@ -0,0 +1,68 @@
|
||||
# lm_sensors configuration file for the ASRock M2NF3-VSTA motherboard
|
||||
# 2008-01-01, Hans de Goede <j.w.r.degoede@hhs.nl>
|
||||
# Comments welcome!
|
||||
|
||||
# Winbond W83627EHF configuration for ASRock AM2NF3-VSTA
|
||||
chip "w83627ehf-*" "w83627dhg-*"
|
||||
|
||||
label in0 "VCore"
|
||||
label in1 "VCore2"
|
||||
label in2 "AVCC"
|
||||
label in3 "3VCC"
|
||||
label in6 "12V"
|
||||
label in7 "VSB"
|
||||
label in8 "VBAT"
|
||||
label in9 "5V"
|
||||
|
||||
# +12V and +5V use dividers recommended by datasheet
|
||||
compute in6 @*(1+(56/10)), @/(1+(56/10))
|
||||
compute in9 @*(1+(22/10)), @/(1+(22/10))
|
||||
|
||||
# in4 and in5 are not used (they seem to be hooked up to 3.3v/2, but thats
|
||||
# already monitored)
|
||||
ignore in4
|
||||
ignore in5
|
||||
|
||||
# we need to set all voltage limits (hurray for a well written BIOS)
|
||||
# Note you may need to adapt in0 and in1 depending on your CPU
|
||||
set in0_min 0.9
|
||||
set in0_max 1.5
|
||||
set in1_min 0.9
|
||||
set in1_max 1.5
|
||||
set in2_min 3.3*0.95
|
||||
set in2_max 3.3*1.05
|
||||
set in3_min 3.3*0.95
|
||||
set in3_max 3.3*1.05
|
||||
set in6_min 12.0*0.9
|
||||
set in6_max 12.0*1.1
|
||||
set in7_min 3.3*0.95
|
||||
set in7_max 3.3*1.05
|
||||
set in8_min 3.0
|
||||
set in8_max 3.3*1.05
|
||||
set in9_min 5.0*0.95
|
||||
set in9_max 5.0*1.05
|
||||
|
||||
# Fans
|
||||
label fan1 "Case Fan"
|
||||
label fan2 "CPU Fan"
|
||||
ignore fan3
|
||||
ignore fan5
|
||||
# Fan minumums, disable fan1 min as a case fan isn't always connected,
|
||||
set fan1_min 0
|
||||
# set fan2_min 1700
|
||||
|
||||
# Temperatures
|
||||
label temp1 "Sys Temp"
|
||||
label temp2 "CPU Temp"
|
||||
label temp3 "CPU2 Temp"
|
||||
|
||||
set temp1_max 45
|
||||
set temp1_max_hyst 40
|
||||
|
||||
|
||||
chip "k8temp-*"
|
||||
|
||||
label temp1 "Core0 Temp"
|
||||
label temp2 "Core0 Temp"
|
||||
label temp3 "Core1 Temp"
|
||||
label temp4 "Core1 Temp"
|
||||
Reference in new issue
Block a user