configs: Bulk config recovery from archive.org (Part 1)

This is a bulk recovery of the sensor configs found at
https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations

The config sections themselves are unaltered, but I've selectively added
some, but not all of the extra info around them. Anywhere there's been
extra info added, it should be in comments at the top of the config,
followed by a double newline to indicate the separation. Attribution has
been retained where possible, but links to the mailing list are hosed,
so goto the above archive.org link to check if a config has extra origin
notes.

[groeck: reformatted description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Tele42 authored and Guenter Roeck committed 2018-01-21 07:34:59 -08:00
1 parent 24dab30d23
commit 1398ef0201
87 files changed
+5534

No files matched your search

+61
View File
@@ -0,0 +1,61 @@
# lm_sensors configuration file for the CFX3200-M2/G infinity motherboard
# 2007-07-06, George Multescu
chip "it8716-*"
# Voltages
label in0 "VCore" #-->cpu voltage
label in1 "VDDR"
label in2 "+3.3V" # VCC3
label in3 "+5V" # VCC
label in4 "V_NBr" #--> notrh bridge voltage
label in5 "+12V"
ignore in6
label in7 "5VSB" # VCCH
label in8 "VBat"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
compute in5 ((30/10)+1.02)*@ , @/((30/10)+1.02) #-->not sure about this one, check this value(+12v) against bios
compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1)
# If vid (nominal CPU voltage) isn't correct, hardcode the correct value
# instead.
# set in0_min vid * 0.95
# set in0_max vid * 1.05
# set in1_min 1.8 * 0.95
# set in1_max 1.8 * 1.05
# set in2_min 3.3 * 0.95
# set in2_max 3.3 * 1.05
# set in3_min 5 * 0.95
# set in3_max 5 * 1.05
set in4_min 1.18 * 0.95
set in4_max 1.18 * 1.05
set in5_max 12 * 1.05
set in5_min 12 * 0.95
# set in6_max -5 * 0.95
# set in6_min -5 * 1.05
# set in7_min 5 * 0.95
# set in7_max 5 * 1.05
# The chip does not support in8 min/max
# Temperatures
label temp1 "System Temp"
label temp2 "CPU Temp"
label temp3 "ChipsetTemp"
# set temp1_over 60
# set temp1_low 10
# set temp2_over 50
# set temp2_low 10
# Fans
label fan1 "Chipset Fan"
label fan2 "CPU Fan"
label fan3 "System fan"
# set fan1_min 2000
# set fan2_min 2000
+82
View File
@@ -0,0 +1,82 @@
# lm_sensors configuration file for DFI Itox EL620-C industrial motherboard
# 2012-06-20, Paul Crawford <psc@sat.dundee.ac.uk>
# Based on feedback from DFI and the schematic sheet 15 of 24, revision A1, 28 October 2011
# Winbond W83627DHG configuration for EL620-C
chip "w83627dhg-*"
label in0 "VCore"
label in1 "+5V"
label in2 "AVCC"
label in3 "+3.3V"
label in4 "+1.1V"
label in5 "Vmemory"
label in6 "+12V"
label in7 "Vstandby"
label in8 "VBAT"
# +12V and +5V use dividers from schematic
compute in1 @*(1+(30.1/10)), @/(1+(30.1/10))
compute in6 @*(1+(60.4/10)), @/(1+(60.4/10))
# We need to set voltage limits.
set in0_min 0.80
set in0_max 1.55
set in1_min 5.0*0.95
set in1_max 5.0*1.05
set in2_min 3.3*0.95
set in2_max 3.3*1.05
set in3_min 3.3*0.95
set in3_max 3.3*1.05
set in4_min 1.1*0.95
set in4_max 1.1*1.05
# DDR3 voltage range
set in5_min 1.30
set in5_max 1.58
# Original ATX spec was +/-10% on +12V, but recent ATX12V version 2.2 spec is 5% (still 10% on unmonitored -12V)
set in6_min 12.0*0.95
set in6_max 12.0*1.05
set in7_min 3.3*0.95
set in7_max 3.3*1.05
# Battery voltage, assume CR2032 Lithium-Manganese Dioxide Battery.
# This actually seems not to be needed as hard-coded?
set in8_min 2.7
set in8_max 3.3
# Fans
label fan1 "System Fan"
label fan2 "CPU Fan"
label fan3 "2nd Fan"
ignore fan4
ignore fan5
# Fan minimums, disable fan1 & fan3 as a case fan is not always connected
set fan1_min 0
set fan2_min 500
set fan3_min 0
# Temperatures. Can we assume temp2 limit for CPU is set by BIOS?
label temp1 "System Temp"
label temp2 "CPU Temp"
label temp3 "NB Temp"
set temp1_max 65
set temp1_max_hyst 55
set temp3_max 65
set temp3_max_hyst 55
# Not sure what this is, always reported 0.000 and the VID0-VID7 pins are not connected on schematic.
ignore cpu0_vid
# From the Intel CPU itself? Seems not to need any special configuration.
#chip "coretemp-*"
+88
View File
@@ -0,0 +1,88 @@
# lm_sensors configuration file for the board
# DFI LP MI P55-T36
# (The above name is reported by sensors-detect -A rev. 5818)
# 2010-06-06, Lars Kr. Lundin
# 2010-06-27, in3, in4 and in7 configuration added by Jean Delvare
chip "it8720-*"
# (sensors-detect -A: Found `ITE IT8720F Super IO Sensors')
# Voltages
# All these voltages match those listed in the BIOS:
label in0 "Vcore"
label in1 "Vtt"
label in2 "+3.30V"
label in3 "+5V"
label in4 "+12V"
label in5 "CPU PLL"
label in6 "DRAM Voltage"
label in7 "5VSB"
compute in3 @ * (6.8/10+1), @ / (6.8/10+1)
compute in4 @ * (30/10+1), @ / (30/10+1)
compute in7 @ * (6.8/10+1), @ / (6.8/10+1)
# Temperatures
# (sensors-detect -A finds NVIDIA i2c adapter i2c-[012345]
# with clients found for i2c-1 and i2c-5.
# The GPU temperature sensor is however not detected).
label temp1 "PCH Temp"
label temp2 "PWM Temp"
label temp3 "CPU Temp"
# Default sensors output for temp3 is "disabled" and a too low temp shown.
# From intel.com:
# Digital Thermal Sensor (DTS) Provides for more efficient processor and platform thermal control, improving system acoustics. The DTS continuously measures the temperature at each processing core. The ability to continuously measure and detect variations in processor temperature enables system fans to spin only as fast as needed to cool the system. The combination of these technologies can result in significantly lower noise emissions from the PC.
# True Shown
# 18 4
# Correct the CPU temperature (at least at 18C):
compute temp3 14+@, @-14
# With the above correction the CPU temperature looks meaningful
# and well correlated with the PWM temperature for varying CPU loads
# and CPU fan speeds.
# However the CPU temperature sensor responds to changes in the
# CPU load almost instantaneously.
# The sensor type for the DTS sensor currently comes out as: disabled
# Don't know what sensor type to use for DTS sensor, so leave the default
# set temp3_type 0
# Fans
ignore fan1
# The BIOS labels the PWM (Pulse Width Modulated) fan "CPU fan".
# The BIOS labels the other, non-PWM fan "PWM fan". This may be
# because this second fan is intended to cool the mainboards
# MOSFET PWMs.
label fan2 "PWM fan"
label fan3 "CPU fan"
# Example sensors output (CPU busy):
# it8720-isa-0a10
# Adapter: ISA adapter
# Vcore: +1.12 V (min = +0.00 V, max = +4.08 V)
# Vtt: +1.15 V (min = +0.00 V, max = +4.08 V)
# +3.30V: +3.26 V (min = +0.00 V, max = +4.08 V)
# +5V: +4.87 V (min = +0.00 V, max = +6.85 V)
# +12V: +11.71 V (min = +0.00 V, max = +16.32 V)
# CPU PLL: +1.81 V (min = +0.00 V, max = +4.08 V)
# DRAM Voltage: +1.65 V (min = +0.00 V, max = +4.08 V)
# 5VSB: +4.87 V (min = +0.00 V, max = +6.85 V)
# Vbat: +3.38 V
# PWM fan: 4560 RPM (min = 0 RPM)
# CPU fan: 602 RPM (min = 0 RPM)
# PCH Temp: +54.0°C (low = -1.0°C, high = +127.0°C) sensor = thermistor
# PWM Temp: +59.0°C (low = -1.0°C, high = +127.0°C) sensor = thermistor
# CPU Temp: +58.0°C (low = +13.0°C, high = +141.0°C) sensor = disabled
# cpu0_vid: +1.300 V
#