wt/lm-sensors
1
0 Fork 0
mirror of https://github.com/lm-sensors/lm-sensors.git synced 2026-11-12 16:50:15 +00:00
Code Issues Packages Projects Releases Wiki Activity

configs: Bulk config recovery from archive.org (Part 1)

Browse Source 
This is a bulk recovery of the sensor configs found at
https://web.archive.org/web/20150901092438/http://www.lm-sensors.org:80/wiki/Configurations

The config sections themselves are unaltered, but I've selectively added
some, but not all of the extra info around them. Anywhere there's been
extra info added, it should be in comments at the top of the config,
followed by a double newline to indicate the separation. Attribution has
been retained where possible, but links to the mailing list are hosed,
so goto the above archive.org link to check if a config has extra origin
notes.

[groeck: reformatted description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Tele42 authored and Guenter Roeck committed 2018-01-21 07:34:59 -08:00
1 parent 24dab30d23
commit 1398ef0201
87 files changed
+5534
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

configs/Intel/D201GLY2.conf
+45
View File
@@ -0,0 +1,45 @@
# Configuration file contributed by Eric Le Bras.
# Configuration file for Intel D201GLY2 motherboard
# Hardware monitor subsystem controlled by Winbond W83627DHG-B I/O controller.
# Created using information from BIOS and board documentation.
chip "w83627dhg-*"
label in1 "+12V"
label in4 "+5V"
label in6 "+1.5V"
# in5 is obviously unconnected, so ignore it
ignore in5
compute in1 @*(55/8), @/(55/8)
compute in4 @*(1+18/10), @/(1+18/10)
set in1_min 12.0 * 0.95
set in1_max 12.0 * 1.05
set in4_min 5.0 * 0.95
set in4_max 5.0 * 1.05
set in6_min 1.5 * 0.90
set in6_max 1.5 * 1.10
label fan1 "Chassis fan"
label fan2 "CPU fan"
# By default the D201GLY2 has a passive heatsink. If the optional active
# heatsink is present, then one of the following lines is to be commented out
# (very likely fan2, though not tried).
ignore fan2
ignore fan3
ignore fan4
label temp1 "Sys temp"
label temp2 "CPU temp"
ignore temp3
set temp1_max 50
set temp1_max_hyst 48
ignore cpu0_vid
ignore intrusion0
configs/Intel/D2500CC.conf
+61
View File
@@ -0,0 +1,61 @@
# Configuration file contributed by Balint Szente.
# Intel D2500CC based on BIOS values
#
chip "w83627uhg-*"
ignore intrusion0
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.91 * 0.99
set in0_max 1.21 * 1.01
# +3.3V
label in1 "+3.3V"
compute in1 3.2*@, @/3.2
set in1_min 3.3 * 0.95
set in1_max 3.3 * 1.05
# +5.0V
label in3 "+5V"
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
# +12.0V
label in4 "+12V"
compute in4 12*@, @/12
set in4_min 12 * 0.95
set in4_max 12 * 1.05
# Memory Vcc
label in5 "Vdimm"
set in5_min 1.5 * 0.95
set in5_max 1.5 * 1.05
# +5.0V Standby
label in7 "5VSB"
set in7_min 4.60
set in7_max 5.40
# Fans
label fan1 "System Fan"
set fan1_min 250
ignore fan2
# Temperatures
# Memory Temperature
label temp1 "DIMM temp"
set temp1_max 80
set temp1_max_hyst 75
# VR Temperature
label temp2 "VR temp"
set temp2_max 80
set temp2_max_hyst 75
configs/Intel/D945GCLF.conf
+55
View File
@@ -0,0 +1,55 @@
# Configuration contributed by Marcelo Coelho.
# Configuration for Intel DG945GCLF
chip "smsc47m1-*"
label fan1 "Case Fan"
label fan2 "CPU Fan"
chip "smsc47m192-*"
label in0 "+2.5V"
set in0_min 2.5 * 0.95
set in0_max 2.5 * 1.05
label in1 "Vcore"
set in1_min 0.9
set in1_max 1.162
label in2 "+3.3V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
label in3 "+5V"
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
label in4 "+12V"
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
label in5 "VCC"
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
label in6 "+1.5V"
set in6_min 1.5 * 0.90
set in6_max 1.5 * 1.10
label in7 "+1.8V"
set in7_min 1.8 * 0.90
set in7_max 1.8 * 1.10
label temp1 "Chipset Temp"
set temp1_min 0
set temp1_max 90
label temp2 "CPU Temp"
set temp2_min 0
set temp2_max 85
label temp3 "System Temp"
set temp3_min 0
set temp3_max 75
configs/Intel/DH57JG.conf
+48
View File
@@ -0,0 +1,48 @@
# Contributed by Guenter Roeck.
chip "nct6775-*"
label in0 "VCore"
label in1 "+12V"
label in2 "AVCC"
label in3 "+3.3V"
label in4 "+5V"
label in5 "+1.5V"
label in7 "VSB"
label in8 "VBAT"
compute in1 16*@, @/16
compute in4 4*@, @/4
compute in5 2*@, @/2
set in0_min 0.5
set in1_min 12 * 0.9
set in1_max 12 * 1.1
set in2_min 3.3 * 0.9
set in2_max 3.3 * 1.1
set in3_min 3.3 * 0.9
set in3_max 3.3 * 1.1
set in4_min 5 * 0.9
set in4_max 5 * 1.1
set in5_min 1.5 * 0.9
set in5_max 1.5 * 1.1
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
ignore in6
set temp1_max 70
set temp1_max_hyst 60
set temp2_max 70
set temp2_max_hyst 60
set temp3_max 70
set temp3_max_hyst 60
# PCH is used to control the fans
ignore fan1
ignore fan2
ignore fan3
ignore fan4
configs/Intel/DH67BL.conf
+95
View File
@@ -0,0 +1,95 @@
# Configuration file contributed by Arseny Klimovsky.
# Created for board DH67BL using information from Intel Desktop Utilities and BIOS
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
chip "nct6775-isa-0290"
# Fans
label fan1 "Rear fan"
set fan1_min 250 # From IDU
label fan2 "CPU fan"
set fan2_min 250 # From IDU
label fan3 "Front fan"
set fan3_min 250 # From IDU
# There is no fan4 on the board
ignore fan4
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.6 # From IDU
set in0_max 1.6 # From IDU
# This should be "12 Volts", but computations are strange
label in1 "+12V"
compute in1 11*@, @/11
set in1_min 11.1 # From IDU
set in1_max 12.9 # From IDU
# AVCC(?) - Not shown in BIOS or IDU
label in2 "AVCC"
set in2_min 3.0 # same as +3.3V
set in2_max 3.6 # same as +3.3V
# +3.3 Volts
label in3 "+3.3V"
set in3_min 3.0 # from IDU
set in3_max 3.6 # from IDU
# +5 Volts
label in4 "+5V"
compute in4 5*@, @/5
set in4_min 4.6 # from IDU
set in4_max 5.4 # from IDU
# Memory Vcc ("SDRAM Vcc" in IDU)
label in5 "MemV"
compute in5 1.5*@, @/1.5
set in5_min 0.4 # from IDU
set in5_max 2.0 # from IDU
# PCH Vcc
label in6 "PCHV"
set in6_min 0.6 # from IDU
set in6_max 1.6 # from IDU
# +3.3 Volt Standby
label in7 "3VSB"
set in7_min 3.0 # from IDU
set in7_max 3.6 # from IDU
# VBAT(?) - Not shown in BIOS or IDU
label in8 "Vbat"
# It shows +2.050 V, seems to be not used
ignore cpu0_vid
# Temperatures
# Labeled as "SYSTIN"
# Guess!
label temp1 "VR temp"
set temp1_max 90 # From IDU
set temp1_max_hyst 75 # From IDU
# Labeled as "CPUTIN"
label temp2 "CPU temp"
set temp2_max 93 # From IDU
set temp2_max_hyst 75 # From IDU
# Labeled as "PECI Agent 0"
# Guess!
label temp3 "Memory DIMM temp"
set temp3_max 90 # From IDU
set temp3_max_hyst 75 # From IDU
# Labeled as "PCH_CHIP_TEMP"
label temp4 "PCH temp"
# Labeled as "PECI Agent 1"
# Not used
ignore temp8
configs/Intel/DN2800MT.conf
+64
View File
@@ -0,0 +1,64 @@
# Configuration file contributed by Balint Szente.
# Intel DN2800MT based on BIOS values
#
chip "w83627dhg-*"
ignore cpu0_vid
ignore intrusion0
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.75 * 0.99
set in0_max 1.21 * 1.01
# +12.0V
label in1 "+12V"
compute in1 12*@, @/12
set in1_min 12 * 0.95
set in1_max 12 * 1.05
# +3.3V
label in3 "+3.3V"
set in3_min 3.3 * 0.95
set in3_max 3.3 * 1.05
# +5.0V
label in4 "+5V"
compute in4 5*@, @/5
set in4_min 5.0 * 0.95
set in4_max 5.0 * 1.05
# Memory Vcc
label in5 "Vdimm"
set in5_min 1.5 * 0.95
set in5_max 1.5 * 1.05
# PCH Vcc
label in6 "PCH"
set in6_min 1.05 * 0.95
set in6_max 1.05 * 1.05
# +3.3V Standby
label in7 "3VSB"
set in7_min 3.3 * 0.95
set in7_max 3.3 * 1.05
# Temperatures
# Memory Temperature
label temp1 "DIMM temp"
set temp1_max 80
set temp1_max_hyst 75
# Always on 110.5
ignore temp2
# VR Temperature
label temp3 "VR temp"
set temp3_max 80
set temp3_max_hyst 75
configs/Intel/DP55WB.conf
+18
View File
@@ -0,0 +1,18 @@
# Contributed by Roderick Johnstone and Jean Delvare.
chip "adt7490-i2c-*-2c"
label in0 "Vdimm"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
ignore temp1
label temp2 "M/B Temp"
label fan1 "CPU Fan"
label fan2 "Front Fan"
label fan3 "Rear Fan"
ignore fan4
configs/Intel/DQ67EP.conf
+94
View File
@@ -0,0 +1,94 @@
# Created for board DQ67EP using information from Intel Desktop Utilities and BIOS
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
chip "nct6775-isa-0290"
# Fans
label fan1 "Rear fan"
set fan1_min 250 # From IDU
label fan2 "CPU fan"
set fan2_min 250 # From IDU
# There is no fan3 on the board
ignore fan3
# There is no fan4 on the board
ignore fan4
# Voltages
# Processor Vcc
label in0 "Vcore"
set in0_min 0.6 # From IDU
set in0_max 1.6 # From IDU
# This should be "12 Volts", but computations are strange
label in1 "+12V"
compute in1 16*@, @/16
set in1_min 11.1 # From IDU
set in1_max 12.9 # From IDU
# AVCC(?) - Not shown in BIOS or IDU
label in2 "AVCC"
set in2_min 3.1 # same as +3.3V
set in2_max 3.5 # same as +3.3V
# +3.3 Volts
label in3 "+3.3V"
set in3_min 3.1 # from IDU
set in3_max 3.5 # from IDU
# +5 Volts
label in4 "+5V"
compute in4 4*@, @/4
set in4_min 4.7 # from IDU
set in4_max 5.3 # from IDU
# Memory Vcc ("SDRAM Vcc" in IDU)
label in5 "+1.5V"
set in5_min 1.4 # from IDU
set in5_max 1.6 # from IDU
# PCH Vcc
label in6 "PCH"
set in6_min 0.6 # from IDU
set in6_max 1.6 # from IDU
# +3.3 Volt Standby
label in7 "3VSB"
set in7_min 3.1 # from IDU
set in7_max 3.5 # from IDU
# VBAT(?) - Not shown in BIOS or IDU
label in8 "Vbat"
# It shows +2.050 V, seems to be not used
ignore cpu0_vid
# Temperatures
# Labeled as "SYSTIN"
# Guess!
label temp1 "DIMM temp"
set temp1_max 80 # From IDU
set temp1_max_hyst 75 # From IDU
# Labeled as "CPUTIN"
label temp2 "VR temp"
set temp2_max 80 # From IDU
set temp2_max_hyst 75 # From IDU
# Labeled as "PECI Agent 0"
# Guess!
label temp3 "CPU temp"
set temp3_max 80 # From IDU
set temp3_max_hyst 75 # From IDU
# Labeled as "PCH_CHIP_TEMP"
label temp7 "PCH temp"
# Labeled as "PECI Agent 1"
# Not used
ignore temp8
configs/Intel/DQ67SW.conf
+342
View File
@@ -0,0 +1,342 @@
# Configuration files contributed by Ian Pilcher.
# The first one is for old BIOS versions:
################################################################################
#
#
# lm_sensors configuration for Intel DQ67SW
#
# NOTES:
#
# BIOS = SWQ6710H.86A.0050.2011.0401.1409 (01-Apr-2011)
#
# IDU = Intel Desktop Utilities version 3.1.3.030
# (Windows 7 Professional SP1, 64-bit)
#
# The minimum, maximum, and hysteresis values are generally the
# more conservative of the IDU- or BIOS-provided values.
#
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
#
# Minimum fan RPMs should be adjusted to reflect the behavior of
# the installed fans.
#
# "Memory DIMM Temperature" is presumably measured by a diode
# somewhere in the vicinity of the DIMM slots; "System Temperature
# might be a better name.
#
# 80 degrees Celcius might be a bit high for the "Memory DIMM
# Temperature" limit.
#
#
################################################################################
chip "nct6775-*"
ignore cpu0_vid
########################################################################
#
# Voltages
#
########################################################################
#
# Processor Vcc
#
label in0 "VCORE"
set in0_min 0.2 # from IDU (BIOS = 0.00)
set in0_max 1.6 # from IDU (BIOS = 1.74)
#
# +12 Volts
#
label in1 "+12V"
compute in1 16*@, @/16
set in1_min 10.8 # from IDU (BIOS does not set)
set in1_max 13.2 # from IDU (BIOS does not set)
#
# AVCC(?) - Not shown in BIOS or IDU
#
label in2 "AVCC"
set in2_min 3.1 # same as +3.3V (BIOS = 2.98)
set in2_max 3.5 # same as +3.3V (BIOS = 3.63)
#
# +3.3 Volts
#
label in3 "+3.3V"
set in3_min 3.1 # from IDU (BIOS = 2.98)
set in3_max 3.5 # from IDU (BIOS = 3.63)
#
# +5 Volts
#
label in4 "+5V"
compute in4 4*@, @/4
set in4_min 4.7 # from IDU (BIOS does not set)
set in4_max 5.3 # from IDU (BIOS does not set)
#
# SDRAM Vcc
#
label in5 "+1.5V"
set in5_min 1.4 # from IDU (BIOS does not set)
set in5_max 1.6 # from IDU (BIOS does not set)
#
# PCH Vcc
#
label in6 "PCH"
set in6_min 0.6 # from IDU (BIOS does not set)
set in6_max 1.6 # from IDU (BIOS does not set)
#
# +3.3 Volt Standby
#
label in7 "VSB"
set in7_min 3.0 # from IDU (BIOS = 2.98)
set in7_max 3.6 # from IDU (BIOS = 3.63)
#
# VBAT(?) - Not shown in BIOS or IDU
#
label in8 "VBAT"
#set in8_min 2.7 # from BIOS
#set in8_max 3.3 # from BIOS
########################################################################
#
# Fans
#
########################################################################
ignore fan4
#
# Chassis Inlet Fan
#
label fan1 "FRONT"
set fan1_min 250 # from IDU (BIOS does not set)
#
# Processor Fan
#
label fan2 "CPU"
set fan2_min 250 # from IDU (BIOS does not set)
#
# Chassis Outlet Fan
#
label fan3 "REAR"
set fan3_min 250 # from IDU (BIOS does not set)
########################################################################
#
# Temperatures
#
########################################################################
ignore temp8
#
# Memory DIMM Temperature
#
label temp1 "DIMM"
set temp1_max 80 # same as VR (IDU = 90)
set temp1_max_hyst 75 # same as VR
#
# VR Temperature
#
label temp2 "VR"
set temp2_max 80 # from BIOS (IDU = 90)
set temp2_max_hyst 75 # from BIOS
#
# Processor Temperature
#
label temp3 "CPU"
set temp3_max 80 # from BIOS (IDU = 87)
set temp3_max_hyst 75 # from BIOS
#
# PCH Temperature
#
label temp4 "PCH"
And the second one is for new BIOS versions:
################################################################################
#
#
# lm_sensors configuration for Intel DQ67SW (with newer BIOS)
#
# NOTES:
#
# Temperature input mappings were changed by a BIOS update
# between SWQ6710H.86A.0050.2011.0401.1409 (01-Apr-2011) and
# SWQ6710H.86A.0065.2012.0917.1519 (17-Sep-2012).
#
# Minimum and maximum values are the defaults from BIOS version
# SWQ6710H.86A.0065.2012.0917.1519 (17-Sep-2012).
#
# Intel Desktop Utilities 3.2.3.052 appears to get its default
# values from the BIOS.
#
# "FRONT" and "REAR" fan labels correspond to the motherboard
# headers, but not necessarily the actual fan locations.
#
# Minimum fan RPMs should be adjusted to reflect the behavior of
# the installed fans.
#
# "Memory DIMM Temperature" is presumably measured by a diode
# somewhere in the vicinity of the DIMM slots; "System Temperature
# might be a better name. If this is correct, 90 degrees seems
# like an extremely high threshhold for this reading.
#
# All hysteresis values are set to 75 degrees, which seems to be
# the default for the chip/driver.
#
#
################################################################################
chip "nct6775-*"
ignore cpu0_vid
########################################################################
#
# Voltages
#
########################################################################
#
# Processor Vcc
#
label in0 "VCORE"
set in0_min 0.2
set in0_max 1.6
#
# +12 Volts
#
label in1 "+12V"
compute in1 16*@, @/16
set in1_min 10.8
set in1_max 13.2
#
# AVCC(?) - Not shown in BIOS or IDU; min/max taken from +3.3V
#
label in2 "AVCC"
set in2_min 3.1
set in2_max 3.5
#
# +3.3 Volts
#
label in3 "+3.3V"
set in3_min 3.1
set in3_max 3.5
#
# +5 Volts
#
label in4 "+5V"
compute in4 4*@, @/4
set in4_min 4.7
set in4_max 5.3
#
# Memory Vcc
#
label in5 "+1.5V"
set in5_min 1.4
set in5_max 1.6
#
# PCH Vcc
#
label in6 "PCH"
set in6_min 0.6
set in6_max 1.6
#
# +3.3 Volt Standby
#
label in7 "VSB"
set in7_min 3.0
set in7_max 3.6
#
# VBAT(?) - Not shown in BIOS or IDU; min/max taken from old BIOS
#
label in8 "VBAT"
#set in8_min 2.7
#set in8_max 3.3
########################################################################
#
# Fans
#
########################################################################
ignore fan4
#
# Chassis Inlet Fan
#
label fan1 "FRONT"
set fan1_min 250 # from IDU (BIOS does not set)
#
# Processor Fan
#
label fan2 "CPU"
set fan2_min 250 # from IDU (BIOS does not set)
#
# Chassis Outlet Fan
#
label fan3 "REAR"
set fan3_min 250 # from IDU (BIOS does not set)
########################################################################
#
# Temperatures
#
########################################################################
ignore temp3
ignore temp8
#
# Memory DIMM Temperature
#
label temp1 "DIMM"
set temp1_max 90
set temp1_max_hyst 75
#
# VR Temperature
#
label temp2 "VR"
set temp2_max 90
set temp2_max_hyst 75
#
# Processor Temperature
#
label temp6 "CPU"
set temp6_max 99
set temp6_max_hyst 75
#
# PCH Temperature
#
label temp7 "PCH"
set temp7_max 114
set temp7_max_hyst 75