(mds) update documentation about m7101 module, add pointer to 0.1 version.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@913 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2000-10-24 23:23:38 +00:00
1 parent 9b95794b50
commit 14934f7c48
2 files changed
+43 -3

No files matched your search

+25 -1
View File
@@ -1,12 +1,15 @@
M7101 - SMBus Support for ALi M15x3 based motherboards.
--------------------------------------------------------
Quick Start:
Quick Start (2.4 kernels only):
"lspci" to verify that 7101 device is not present
"make"
(as root) "make install"
(as root) "insmod m7101"
"lspci" to verify that 7101 device is present
--------------------------------------------------------
--------------------------------------------------------
Version 0.2 for 2.4.0-testx kernels.
@@ -15,6 +18,27 @@ Mark D. Studebaker <mdsxyz123@yahoo.com>
*** You must have 'Support for hot-pluggable devices' enabled
*** in your kernel (under 'general setup') for this module to work!!
For 2.2 and early 2.3 kernels you must use version 0.1;
version 0.2 will not work.
Version 0.1 does not use the kernel hotplug facility.
Obtain version 0.1 here:
README: http://www.netroedge.com/~lm78/misc/README-m7101.txt
source and README: http://www.netroedge.com/~lm78/misc/m7101-0.1.tar.gz
--------------------------------------------------------
Notes below for the 0.2 version, MDS.
--------------------------------------------------------
Default I/O addresses are 0xe800 for SMBus and 0xec00 for ACPI.
These can be changed at module insertion.
For example:
insmod m7101 smb_io=0x5000 acpi_io=0x4000
--------------------------------------------------------
Notes below from the 0.1 version, B. Kohl.
--------------------------------------------------------