diff --git a/prog/eepromer/eeprog.c b/prog/eepromer/eeprog.c
index 6213a802..5006e5ac 100644
--- a/prog/eepromer/eeprog.c
+++ b/prog/eepromer/eeprog.c
@@ -39,15 +39,15 @@ const static char *eeprog_usage =
 "Copyright (c) 2003 by Stefano Barbato - All rights reserved.\n"
 "Usage: eeprog [-fqxdh] [-16|-8] [ -r addr[:count] | -w addr ]  /dev/i2c-N  i2c-address\n" 
 "\n"
-"  Address modes: \n"
+"  Address modes:\n"
 "	-8		Use 8bit address mode for 24c0x...24C16 [default]\n"
 "	-16		Use 16bit address mode for 24c32...24C256\n"
-"  Actions: \n"
+"  Actions:\n"
 "	-r addr[:count]	Read [count] (1 if omitted) bytes from [addr]\n" 
 "			and print them to the standard output\n" 
 "	-w addr		Write input (stdin) at address [addr] of the EEPROM\n"
 "	-h		Print this help\n"
-"  Options: \n"
+"  Options:\n"
 "	-x		Set hex output mode\n" 
 "	-d		Dummy mode, display what *would* have been done\n" 
 "	-f		Disable warnings and don't ask confirmation\n"
@@ -62,11 +62,11 @@ const static char *eeprog_usage =
 "	1- read 64 bytes from the EEPROM at address 0x54 on bus 0 starting\n"
 "	   at address 123 (decimal)\n"
 "		eeprog /dev/i2c-0 0x54 -r 123:64\n"
-"	2- prints the hex codes of the first 32 bytes read from bus 1 \n"
+"	2- prints the hex codes of the first 32 bytes read from bus 1\n"
 "	   at address 0x22\n"
 "		eeprog /dev/i2c-1 0x51 -x -r 0x22:0x20\n"
-"	3- write the current timestamp at address 0x200 of the EEPROM on \n"
-"	   bus 0 at address 0x33 \n"
+"	3- write the current timestamp at address 0x200 of the EEPROM on\n"
+"	   bus 0 at address 0x33\n"
 "		date | eeprog /dev/i2c-0 0x33 -w 0x200\n";
 
 	if(!b)
diff --git a/prog/hotplug/m7101.c b/prog/hotplug/m7101.c
index 52a64d84..a7e4a977 100644
--- a/prog/hotplug/m7101.c
+++ b/prog/hotplug/m7101.c
@@ -134,7 +134,7 @@ dump_dev_data(struct pci_dev *dev, int address_data)
 					dev->resource[2].start, dev->resource[3].start);
 			printk("m7101: resource[4]: 0x%08lx   resource[5]: 0x%08lx\n",
 					dev->resource[4].start, dev->resource[5].start);
-			printk("m7101: rom_address:     0x%08lx  \n",
+			printk("m7101: rom_address:     0x%08lx\n",
 					dev->resource[PCI_ROM_RESOURCE].start);
 		}
 	}
diff --git a/prog/pwm/fancontrol.pl b/prog/pwm/fancontrol.pl
index 20ca12cc..112be1ed 100755
--- a/prog/pwm/fancontrol.pl
+++ b/prog/pwm/fancontrol.pl
@@ -186,7 +186,7 @@ $minstop);
    unless (defined($interval))
      { die("Some settings missing ..."); }
 
-   print("\nCommon settings: \n");
+   print("\nCommon settings:\n");
    print("  INTERVAL=$interval\n");
 
    my $fcvcount = 0;
diff --git a/prog/sensors/chips.c b/prog/sensors/chips.c
index 5d69f349..1317b167 100644
--- a/prog/sensors/chips.c
+++ b/prog/sensors/chips.c
@@ -3685,7 +3685,7 @@ void print_fscpos(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
 	if((int) state & 0x01)
-	  printf("\t%+6.2f C \n",temp);
+	  printf("\t%+6.2f C\n", temp);
 	else
       	  printf("\tfailed\n");
     }
@@ -3699,7 +3699,7 @@ void print_fscpos(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
 	if((int) state & 0x01)
-	  printf("\t%+6.2f C \n",temp);
+	  printf("\t%+6.2f C\n", temp);
 	else
 	  printf("\tfailed\n");
     }
@@ -3713,7 +3713,7 @@ void print_fscpos(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
 	if((int) state & 0x01)
-	  printf("\t%+6.2f C \n",temp);
+	  printf("\t%+6.2f C\n", temp);
 	else
 	  printf("\tfailed\n");
     }
@@ -3729,7 +3729,7 @@ void print_fscpos(const sensors_chip_name *name)
 	if((int) state & 0x04)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN1 data!\n");
@@ -3743,7 +3743,7 @@ void print_fscpos(const sensors_chip_name *name)
 	if((int) state & 0x04)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN2 data!\n");
@@ -3757,7 +3757,7 @@ void print_fscpos(const sensors_chip_name *name)
 	if((int) state & 0x04)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN3 data!\n");
@@ -3880,7 +3880,7 @@ void print_fscscy(const sensors_chip_name *name)
 	if((int) state & 0x02)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN1 data!\n");
@@ -3894,7 +3894,7 @@ void print_fscscy(const sensors_chip_name *name)
 	if((int) state & 0x02)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN2 data!\n");
@@ -3908,7 +3908,7 @@ void print_fscscy(const sensors_chip_name *name)
 	if((int) state & 0x02)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN3 data!\n");
@@ -3922,7 +3922,7 @@ void print_fscscy(const sensors_chip_name *name)
 	if((int) state & 0x02)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN4 data!\n");
@@ -3936,7 +3936,7 @@ void print_fscscy(const sensors_chip_name *name)
 	if((int) state & 0x02)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN5 data!\n");
@@ -3950,7 +3950,7 @@ void print_fscscy(const sensors_chip_name *name)
 	if((int) state & 0x02)
 	  printf("\tfaulty\n");
 	else
-	  printf("\t%6.0f RPM \n",fan);
+	  printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN6 data!\n");
@@ -3999,7 +3999,7 @@ void print_fscher(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       if((int) state & 0x01)
-        printf("\t%+6.2f C \n",temp);
+        printf("\t%+6.2f C\n", temp);
       else
         printf("\tfailed\n");
     }
@@ -4013,7 +4013,7 @@ void print_fscher(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       if((int) state & 0x01)
-        printf("\t%+6.2f C \n",temp);
+        printf("\t%+6.2f C\n", temp);
       else
         printf("\tfailed\n");
     }
@@ -4027,7 +4027,7 @@ void print_fscher(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       if((int) state & 0x01)
-        printf("\t%+6.2f C \n",temp);
+        printf("\t%+6.2f C\n", temp);
       else
         printf("\tfailed\n");
     }
@@ -4043,7 +4043,7 @@ void print_fscher(const sensors_chip_name *name)
       if((int) state & 0x04)
         printf("\tfaulty\n");
       else
-        printf("\t%6.0f RPM \n",fan);
+        printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN1 data!\n");
@@ -4057,7 +4057,7 @@ void print_fscher(const sensors_chip_name *name)
       if((int) state & 0x04)
         printf("\tfaulty\n");
       else
-        printf("\t%6.0f RPM \n",fan);
+        printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN2 data!\n");
@@ -4071,7 +4071,7 @@ void print_fscher(const sensors_chip_name *name)
       if((int) state & 0x04)
         printf("\tfaulty\n");
       else
-        printf("\t%6.0f RPM \n",fan);
+        printf("\t%6.0f RPM\n", fan);
     }
   } else
     printf("ERROR: Can't get FAN3 data!\n");
@@ -5440,7 +5440,7 @@ void print_max6650(const sensors_chip_name *name)
         !sensors_get_feature(*name,tach_list[i].tag,&tach)) {
       if (valid) {
         print_label(label,10);
-        printf("%4.0f RPM  \n", tach);
+        printf("%4.0f RPM\n", tach);
       }
     } else
       printf("ERROR: Can't get %s data!\n", tach_list[i].name);