From 24cfa4d3e2704e9cc02fdc70a58fccffeb9d715c Mon Sep 17 00:00:00 2001 From: clipo1979 Date: Sat, 16 Mar 2019 20:58:14 +0000 Subject: [PATCH] Create GA-M56S-S3.conf [olysonek: squashed commits] --- configs/Gigabyte/GA-M56S-S3.conf | 81 ++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 configs/Gigabyte/GA-M56S-S3.conf diff --git a/configs/Gigabyte/GA-M56S-S3.conf b/configs/Gigabyte/GA-M56S-S3.conf new file mode 100644 index 00000000..1091a2eb --- /dev/null +++ b/configs/Gigabyte/GA-M56S-S3.conf @@ -0,0 +1,81 @@ +# Configuration file for the Gigabyte GA-M56S-S3 +# contributed by Clipo. +# 16-03-2019 +# Updates welcome. + +# CPU sensor + +chip "k8temp-*" + + label temp1 "Core0 Temp" + label temp2 "Core0 Temp" + label temp3 "Core1 Temp" + label temp4 "Core1 Temp" + +# Motherboard sensors + +chip "it8716-*" + +### Voltages + + label in0 "VCore" + label in1 "VDDR" + label in2 "+3.3V" # VCC3 + label in3 "+5V" # VCC + label in4 "+12V" + ignore in5 # "-12V" + ignore in6 # "-5V" + label in7 "5VSB" # VCCH + label in8 "VBat" + +# "Vcore", "DDR2 1.8V", "+3.3V" and "Vbat" are connected directly, so no compute +# line is needed for these. + + compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) + compute in4 ((30/10)+1)*@ , @/((30/10)+1) +# compute in5 (1+232/56)*@ - 4.096*232/56 , (@ + 4.096*232/56)/(1+232/56) +# compute in6 (1+120/56)*@ - 4.096*120/56 , (@ + 4.096*120/56)/(1+120/56) + compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) + +# + # The BIOS will not set any limit for voltages. + + set in0_min 0.825 * 0.95 + set in0_max 1.425 * 1.05 + set in1_min 1.8 * 0.95 + set in1_max 1.8 * 1.05 + set in2_min 3.3 * 0.95 + set in2_max 3.3 * 1.05 + set in3_min 5 * 0.95 + set in3_max 5 * 1.05 + set in4_min 12 * 0.95 + set in4_max 12 * 1.05 + set in7_min 5 * 0.95 + set in7_max 5 * 1.05 + +### Temperatures + + label temp1 "System Temp" + # This sensor appears to be around or inside the ITE8716F chip. + set temp1_min 0 + set temp1_max 40 + + label temp3 "CPU Temp (Thermal Diode)" + # This sensor can show 2 degrees difference to the K8 sensor. + # The end user can choose which one they prefer. + set temp3_min 0 + set temp3_max 60 # Set to match your BIOS "CPU Warning Temperature" + + ignore temp2 #"Second CPU Temp (Thermistor)" + #This sensors appears to follow the CPU temp but with a large termal lag so not very usable + +### Fans + + # Label based on motherboard connectors. + label fan1 "CPU Fan" # M/B label: CPU_FAN (4-pin) + label fan2 "System Fan" # M/B label: SYS_FAN (3-pin) + + # Minimum fan speeds. + # Comment/un-comment fan headers you are using if you want alarms. + set fan1_min 300 # CPU Fan + set fan2_min 300 # System Fan 1