Drop all references to the old mailing list.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3075 7894878c-1315-0410-8ee3-d5d059ff63e0
2026-11-01 13:20:30 +00:00 · 2005-09-08 16:29:41 +00:00
1 parent 2c48b2afc9
commit 28f8be1038
@@ -54,6 +54,3 @@ A BUS driver is used by other CHIP drivers to access chips on the bus.

 To install this driver, simply do
  # modprobe i2c-sis5595
-
-This driver is ALPHA!!!
-Please send feedback to us at sensors@stimpy.netroedge.com.
@@ -47,9 +47,9 @@ Note: kernel versions later than 2.4.18 not tested.

 If anyone owns a board with those chips AND is willing to risk crashing &
 burning an otherwise well-behaved kernel in the name of progress... please
-contact me at <amalysh@web.de> or via the project's mailing list:
-<sensors@stimpy.netroedge.com>.  Please send bug reports and/or success
-stories as well.
+contact me at <amalysh@web.de> or via the project's mailing list: see
+http://secure.netroedge.com/~lm78/author.html.  Please send bug reports
+and/or success stories as well.


 Thank Yous
@@ -56,8 +56,8 @@ as well: 635, and 635T.
 If anyone owns a board with those chips AND is willing to risk crashing &
 burning an otherwise well-behaved kernel in the name of progress... please
 contact me at <mhoffman@lightlink.com> or via the project's mailing list:
-<sensors@stimpy.netroedge.com>.  Please send bug reports and/or success
-stories as well.
+see http://secure.netroedge.com/~lm78/author.html.  Please send bug reports
+and/or success stories as well.


 TO DOs
@@ -13,7 +13,7 @@ run prog/detect/sensors-detect.

 If your sensor chip is not detected by sensors-detect
 or supported by this package,
-please send mail to sensors@stimpy.netroedge.com.
+please send mail (see http://secure.netroedge.com/~lm78/author.html)

 Please include the following in your mail:
 	- The output of (as root) 'prog/detect/sensors-detect'
@@ -87,8 +87,7 @@ RESULTS
 If you try this on a supported configuration,
 please report your clock chip, your SMBus chip
 (piix4 or ali15x3), and the results of
-'cat /proc/sys/dev/sensors/icspll-i2c-*-69/reg0-6' to
-sensors@stimpy.netroedge.com.
+'cat /proc/sys/dev/sensors/icspll-i2c-*-69/reg0-6'


 TO DO
@@ -71,8 +71,3 @@ Sensor selection is as follows:
 	1	Analog input (not for temperature sensing)	2,3
 	2	Thermistor					1,2,3
 	3	Pentium diode					1,2
-
-
-Maintainer
-----------------
-Send requests to the sensors@stimpy.netroedge.com mailing list.
@@ -92,4 +92,3 @@ Author/Maintainer
 -----------------
 Mark D. Studebaker (mdsxyz123@yahoo.com).
 Derived from the w83781d driver.
-Send requests to the sensors@stimpy.netroedge.com mailing list.
@@ -599,9 +599,8 @@ register in Bank0.CR51 of W83781D.
 
 Author/Maintainer
 -----------------
-Original 781D support: Frodo and Phil (sensors@stimpy.netroedge.com)
+Original 781D support: Frodo and Phil
 782D/783S support added by: Mark D. Studebaker (mdsxyz123@yahoo.com)
-Send requests to the sensors@stimpy.netroedge.com mailing list.


 Asus Clones
@@ -106,4 +106,3 @@ Author/Maintainer
 Mark D. Studebaker (mdsxyz123@yahoo.com).
 Derived from the adm1021 driver.
 Thanks to Philip Pokorny for help with this document.
-Send requests to the sensors@stimpy.netroedge.com mailing list.
@@ -136,10 +136,11 @@ steps apply.

 * If you want to have your driver integrated to Linux 2.6, you have to
  port your driver to the new sysfs interface. Once done and preferably
-  after testing, submit a patch to the Linux kernel mailing list
-  <linux-kernel at vger dot kernel dot org>, our mailing list
-  <sensors at stimpy dot netroedge.com>,and Greg KH (greg at kroah
-  dot com).
+  after testing, submit a patch to our mailing list: see
+  http://secure.netroedge.com/~lm78/author.html
+  Make sure to check the current status for your driver first:
+  http://secure.netroedge.com/~lm78/kernel26.html
+  http://secure.netroedge.com/~lm78/newdrivers.html

 ---------------------------------------------------------------------
 Checklist for us to do on the webpage:
@@ -11,8 +11,8 @@ Donation of usable computer hardware also supports the project in general,
 so hardware which isn't directly related to the development of a hardware
 monitoring driver, but can be used to build test systems, is welcome too.

-If you would like to make a donation, please contact us at
-sensors@stimpy.netroedge.com. Thanks!
+If you would like to make a donation, please contact us. See
+http://secure.netroedge.com/~lm78/author.html. Thanks!


 Donations are listed in chronological order. Note that the person mentioned
@@ -285,10 +285,6 @@ implementations. Please report any other references you have found!</p>
 		(ASF) specification</a>
 		<br />A standard for system management messages using the SMBus
 		and passing this information to remote management devices. By the DMTF.</li>
-	<li><a href="http://archives.andrew.net.au/lm-sensors/">LM Sensors mailing list
-		archive</a>
-		<br />This is the mailing list archive for sensors@stimpy.netroedge.com,
-		the developer's mailing list. The archive contains messages since October 28, 2001.</li>
 	<li><a href="http://www.tip.net.au/~millerp/rmch/recu-make-cons-harm.html">Recursive
 		make considered harmful</a>
 		<br />A paper on which the version 2 Makefile is based.</li>