From 2ea22de08192a570c7d5193431f45e1956139989 Mon Sep 17 00:00:00 2001 From: "Mark D. Studebaker" Date: Thu, 11 Mar 1999 03:32:46 +0000 Subject: [PATCH] Added 782d/783s section. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@306 7894878c-1315-0410-8ee3-d5d059ff63e0 --- etc/sensors.conf.eg | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg index 846b04ab..a99208d0 100644 --- a/etc/sensors.conf.eg +++ b/etc/sensors.conf.eg @@ -196,6 +196,50 @@ chip "lm78-*" "lm78-j-*" "lm79-*" "w83781d-*" "sis5595-*" set in6_max -5 * 1.05 +chip "w83782d-*" "w83783s-*" + +# Same as above for w83781d except that in5 and in6 are computed differently. +# Rather than an internal inverting op amp, the 82d/83s use standard positive +# inputs and the negative voltages are level shifted by a 3.6V reference. +# The math is convoluted, hope that your motherboard uses the recommended +# resistor values. + + label in0 "VCore 1" + label in1 "VCore 2" + label in2 "+3.3V" + label in3 "+5V" + label in4 "+12V" + label in5 "-12V" + label in6 "-5V" + label in7 "V5SB" + label in8 "VBat" + + compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) + compute in4 ((28/10)+1)*@ , @/((28/10)+1) + compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14 + compute in6 (3.14 * @) - 7.71 , (@ + 7.71) / 3.14 + compute in7 ((6.8/10)+1)*@ , @/((6.8/10)+1) + + set in0_min vid*0.95 + set in0_max vid*1.05 + set in1_min vid*0.95 + set in1_max vid*1.05 + set in2_min 3.3 * 0.95 + set in2_max 3.3 * 1.05 + set in3_min 5.0 * 0.95 + set in3_max 5.0 * 1.05 + set in4_min 12 * 0.95 + set in4_max 12 * 1.05 + set in5_min -12 * 0.95 + set in5_max -12 * 1.05 + set in6_min -5 * 0.95 + set in6_max -5 * 1.05 + set in7_min 5 * 0.95 + set in7_max 5 * 1.05 + set in8_min 3.3 * 0.95 + set in8_max 3.3 * 1.05 + + chip "gl518sm-r00-*" "gl518sm-r80-*" # Factors and labels taken from GL518SM datasheet, they seem to give