mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-21 19:51:45 +00:00
Preleminary (read-only) National Semiconductor PC87360, PC87363
and PC87364 fan monitor and controller support. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2405 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
1 parent
c1d0ddea28
commit
3307085b6b
2 files changed
+525
No files matched your search
@@ -0,0 +1,56 @@
|
||||
Kernel driver `pc87360-fan.o'
|
||||
=============================
|
||||
|
||||
Status: Alpha, untested.
|
||||
|
||||
Supported chips:
|
||||
* National Semiconductor PC87360, PC87363 and PC87364
|
||||
Addresses scanned: none, address read from Super I/O config space
|
||||
Datasheets:
|
||||
http://www.national.com/pf/PC/PC87360.html
|
||||
http://www.national.com/pf/PC/PC87363.html
|
||||
http://www.national.com/pf/PC/PC87364.html
|
||||
|
||||
Authors: Jean Delvare <khali@linux-fr.org>
|
||||
|
||||
|
||||
Module Parameters
|
||||
-----------------
|
||||
|
||||
None.
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
The National Semiconductor PC87360 Super I/O chip contains monitoring and
|
||||
PWM control circuitry for two fans. The PC87363 chip is similar, and the
|
||||
PC87364 chip has monitoring and PWM control for a third fan.
|
||||
|
||||
Fan rotation speeds are reported in RPM (revolutions per minute). An alarm
|
||||
is triggered if the rotation speed has dropped below a programmable limit.
|
||||
Fan readings can be divided by a programmable divider (1, 2, 4 or 8) to give
|
||||
the readings more range or accuracy. Not all RPM values can accurately be
|
||||
represented, so some rounding is done. With a divider of 2, the lowest
|
||||
representable value is around 2600 RPM.
|
||||
|
||||
A different alarm is also triggered if the fan speed is too low to be
|
||||
measured. It is suggested to increase the fan divisor in this case.
|
||||
|
||||
PWM values are from 0 to 255.
|
||||
|
||||
If an alarm triggers, it will remain triggered until the hardware register
|
||||
is read at least once. This means that the cause for the alarm may
|
||||
already have disappeared! Note that in the current implementation, all
|
||||
hardware registers are read whenever any data is read (unless it is less
|
||||
than 1.5 seconds since the last update). This means that you can easily
|
||||
miss once-only alarms.
|
||||
|
||||
|
||||
Limitations
|
||||
-----------
|
||||
|
||||
This driver is read-only at the moment. Since I don't own a supported
|
||||
chip for testing, and the datasheet suggests that you shouldn't change
|
||||
values once the monitoring has started (this is normally done by the BIOS
|
||||
at boot time), I decided to play it safe.
|
||||
Reference in new issue
Block a user