From 3b4a15d898cb2fe35b8188458f5a895574d9346b Mon Sep 17 00:00:00 2001 From: "Maciej S. Szmigiero" Date: Fri, 15 Dec 2017 20:30:12 +0100 Subject: [PATCH] configs: Add Axiomtek CAPA800 config file This commit adds board configuration file for Axiomtek CAPA800 Intel Atom single board computer, which uses Winbond W83627UHG as its Super I/O. Input routing and scaling on this board is mostly based on SIO datasheet recommended setup, small differences were determined experimentally by comparing sensors output with a BIOS screen. Signed-off-by: Maciej S. Szmigiero --- configs/Axiomtek/CAPA800.conf | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 configs/Axiomtek/CAPA800.conf diff --git a/configs/Axiomtek/CAPA800.conf b/configs/Axiomtek/CAPA800.conf new file mode 100644 index 00000000..04176fc4 --- /dev/null +++ b/configs/Axiomtek/CAPA800.conf @@ -0,0 +1,25 @@ +# input routing and scaling mostly based on datasheet recommended setup, +# differences were determined experimentally + +chip "w83627uhg-*" + label in0 "Vcore" + + label in1 "+12V" + compute in1 @ * (10 + 150) / 10, @ * 10 / (10 + 150) + set in1_min 12 * 0.95 + set in1_max 12 * 1.05 + + #label in4 "+2.5V" + #compute in4 @ * 2 / 1, @ * 1 / 2 + # ^ probable, not in BIOS + ignore in4 + + label in5 "+3.3V" + compute in5 @ * 2 / 1, @ * 1 / 2 + set in5_min 3.3 * 0.95 + set in5_max 3.3 * 1.05 + + ignore fan1 + label fan2 "CPUFAN" + + ignore intrusion0