diff --git a/kernel/busses/i2c-viapro.c b/kernel/busses/i2c-viapro.c index fc544f87..cfbcea2b 100644 --- a/kernel/busses/i2c-viapro.c +++ b/kernel/busses/i2c-viapro.c @@ -1,7 +1,7 @@ /* i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998 - 2002 Frodo Looijaard , + Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker @@ -45,9 +45,9 @@ #include "version.h" #include "sensors_compat.h" -#define SMBBA1 0x90 -#define SMBBA2 0x80 -#define SMBBA3 0xD0 +#define SMBBA1 0x90 +#define SMBBA2 0x80 +#define SMBBA3 0xD0 /* SMBus address offsets */ static unsigned short vt596_smba; @@ -67,26 +67,26 @@ static unsigned short vt596_smba; /* PCI Address Constants */ /* SMBus data in configuration space can be found in two places, - We try to select the better one*/ + We try to select the better one */ static unsigned short smb_cf_hstcfg = 0xD2; -#define SMBHSTCFG (smb_cf_hstcfg) -#define SMBSLVC (smb_cf_hstcfg + 1) -#define SMBSHDW1 (smb_cf_hstcfg + 2) -#define SMBSHDW2 (smb_cf_hstcfg + 3) -#define SMBREV (smb_cf_hstcfg + 4) +#define SMBHSTCFG (smb_cf_hstcfg) +#define SMBSLVC (smb_cf_hstcfg + 1) +#define SMBSHDW1 (smb_cf_hstcfg + 2) +#define SMBSHDW2 (smb_cf_hstcfg + 3) +#define SMBREV (smb_cf_hstcfg + 4) /* Other settings */ #define MAX_TIMEOUT 500 #define ENABLE_INT9 0 /* VT82C596 constants */ -#define VT596_QUICK 0x00 -#define VT596_BYTE 0x04 -#define VT596_BYTE_DATA 0x08 -#define VT596_WORD_DATA 0x0C -#define VT596_BLOCK_DATA 0x14 +#define VT596_QUICK 0x00 +#define VT596_BYTE 0x04 +#define VT596_BYTE_DATA 0x08 +#define VT596_WORD_DATA 0x0C +#define VT596_BLOCK_DATA 0x14 /* If force is set to anything different from 0, we forcibly enable the @@ -114,19 +114,19 @@ static int vt596_transaction(void) int timeout = 0; dev_dbg(&vt596_adapter, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter, "SMBus busy (0x%02x). " - "Resetting...\n", temp); - + "Resetting...\n", temp); + outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_dbg(&vt596_adapter, "Failed! (0x%02x)\n", temp); - + return -1; } else { dev_dbg(&vt596_adapter, "Successfull!\n"); @@ -136,7 +136,7 @@ static int vt596_transaction(void) /* start the transaction by setting bit 6 */ outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); - /* We will always wait for a fraction of a second! + /* We will always wait for a fraction of a second! I don't know if VIA needs this, Intel did */ do { i2c_delay(1); @@ -176,16 +176,16 @@ static int vt596_transaction(void) dev_dbg(&vt596_adapter, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); - + return result; } /* Return -1 on error. */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, u8 command, - int size, union i2c_smbus_data *data) + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) { int i, len; @@ -254,7 +254,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, case VT596_BYTE: /* Where is the result put? I assume here it is in * SMBHSTDAT0 but it might just as well be in the - * SMBHSTCMD. No clue in the docs + * SMBHSTCMD. No clue in the docs */ data->byte = inb_p(SMBHSTDAT0); break; @@ -317,7 +317,7 @@ static int __init vt596_probe(struct pci_dev *pdev, { unsigned char temp; int error = -ENODEV; - + /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -348,7 +348,7 @@ static int __init vt596_probe(struct pci_dev *pdev, return -ENODEV; } - found: +found: if (!request_region(vt596_smba, 8, "viapro-smbus")) { dev_err(pdev, "SMBus region 0x%x already in use!\n", vt596_smba); @@ -363,13 +363,13 @@ static int __init vt596_probe(struct pci_dev *pdev, pci_write_config_word(pdev, id->driver_data, vt596_smba); pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); dev_warn(pdev, "WARNING: SMBus interface set to new " - "address 0x%04x!\n", vt596_smba); + "address 0x%04x!\n", vt596_smba); } else if ((temp & 1) == 0) { if (force) { - /* NOTE: This assumes I/O space and other allocations - * WERE done by the Bios! Don't complain if your - * hardware does weird things after enabling this. - * :') Check for Bios updates before resorting to + /* NOTE: This assumes I/O space and other allocations + * WERE done by the Bios! Don't complain if your + * hardware does weird things after enabling this. + * :') Check for Bios updates before resorting to * this. */ pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); @@ -395,11 +395,11 @@ static int __init vt596_probe(struct pci_dev *pdev, dev_dbg(pdev, "VT596_smba = 0x%X\n", vt596_smba); snprintf(vt596_adapter.name, 32, - "SMBus Via Pro adapter at %04x", vt596_smba); - + "SMBus Via Pro adapter at %04x", vt596_smba); + return i2c_add_adapter(&vt596_adapter); - release_region: +release_region: release_region(vt596_smba, 8); return error; }