(Phil) Added a patch from Stephen Davies <steve@daviesfam.org> for

s-video out support and typical DVD resolutions for PAL and NTSC.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1298 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Philip Edelbrock committed 2002-01-29 19:25:37 +00:00
1 parent 117f27c098
commit 4cd4f15116
3 files changed
+441 -36

No files matched your search

+29 -16
View File
@@ -11,7 +11,9 @@ Supported chips:
(www.brooktree.com)
Author: Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock
<phil@netroege.com> and Ralph Metzler <rjkm@thp.uni-koeln.de>
<phil@netroedge.com>, Ralph Metzler <rjkm@thp.uni-koeln.de>
Steve Davies <steve@daviesfam.org> added the 720x576 and
720x480 support, and the svideo configuration.
Main Contact: Philip Edelbrock <phil@netroedge.com>
@@ -34,32 +36,42 @@ Module Parameters
Description
-----------
This driver provides some access to the Brooktree bt869 found on some video
cards (like the 'Voodoo3 3000'). Typically, the output can be either an
s-video connection or composite video. Resolutions supported using the
chip's built in configurations are 640x480 or 800x600. Other possible
implementations may allow for double resolutions with some decimations
(e.g., a monitor running at 1280x960 but the TV out getting every other
pixel for 640x480).
This driver provides some access to the Brooktree bt869 found on some
video cards (like the 'Voodoo3 3000'). Typically, the output can be
either an s-video connection or composite video. Resolutions
supported using the chip's built in configurations are 640x480 or
800x600. In addition, a 720x576 PAL mode and a 720x480 NTSC mode,
both without overscan compensation, are supported - a convenient
configuration for video playback.
Other possible implementations may allow for double resolutions with some
decimations (e.g., a monitor running at 1280x960 but the TV out getting every
other pixel for 640x480).
Driver Features
---------------
Stanards: (US) NTSC or PAL (PAL untested)
Resultions: 640x480 and 800x600
Depths: 16 bit or 32 (I forgot if 24 bit worked OK, it probably does)
Standards: (US) NTSC or PAL
Resolutions: 640x480, 800x600, 720x576 (PAL only), 720x480 (NTSC only)
Depths: 16, 24 or 32 bits
Colorbars: Switch on the built-in color bar generator. (FYI- using a blue
filter, you should see only alternating bright stripes of equal brightness.
Adjust your TV's color and saturation if this isn't the case.)
SVideo: composite or s-video output. Also, theoretically, RGB output, though
this isn't tested and will require that your card presents all three DAC outputs
(the 3dfx Voodoo3 doesn't)
In your XF86Config file, you should have these entries for NTSC output:
ModeLine "640x480NTSC" 28.195793 640 656 658 784 480 520 525 600
ModeLine "720x480NTSC" 27.5 720 744 800 872 480 483 485 525
ModeLine "800x600NTSC" 38.769241 800 812 814 880 600 646 649 735
or for PAL (untested),
or for PAL
ModeLine "640x480PAL" 29.50 640 675 678 944 480 530 535 625
ModeLine "720x576PAL" 27.50 720 744 800 880 576 581 583 625
ModeLine "800x600PAL" 36.00 800 818 820 960 600 653 655 750
Also, don't forget to add these modes to the resolutions list in the
@@ -76,10 +88,12 @@ be fashionable to warn about it.)
Chip Features
-------------
The chip is very flexible and customizable for many standards. Right now
the driver sticks with the chip's built in NTSC and PAL standards. It also
The chip is very flexible and customizable for many standards. Right
now the driver sticks with the chip's built in NTSC and PAL standards,
with the addition of the 720x576PAL and 720x480NTSC modes. It also
does some other wacky stuff like closed-captioning, Macro-vision
copy-protection, and other things. Check out the datasheet for more info.
copy-protection, and other things. Check out the datasheet for more
info.
Issues
@@ -93,7 +107,6 @@ use the BT869 as your primary output device (all bets are off once X is
started). Let me know if you have problems which you can't figure out
(phil@netroedge.com).
--------------------------------
On May 3rd, 2001 (My birthday, as it happens to be :') Tomi Ollila sent me