From 4f0e90aa41f0008e7e7ebe292aef1c47dc0fa1bc Mon Sep 17 00:00:00 2001
From: Rudolf Marek <r.marek@assembler.cz>
Date: Sun, 24 Sep 2006 19:04:00 +0000
Subject: [PATCH] Add some 2.6 quickstart instructions

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4174 7894878c-1315-0410-8ee3-d5d059ff63e0
---
 INSTALL    |  2 +-
 QUICKSTART | 32 ++++++++++++++++++++++++++++----
 README     |  3 ++-
 3 files changed, 31 insertions(+), 6 deletions(-)

diff --git a/INSTALL b/INSTALL
index 89a53585..7bf043ae 100644
--- a/INSTALL
+++ b/INSTALL
@@ -12,7 +12,7 @@ FOR 2.5/2.6 KERNELS, do not attempt to compile the modules in this package.
     Use the drivers already in the 2.5/2.6 kernel tree.
     If you are running a 2.5/2.6 kernel, the ONLY thing you need to
     do is 'make user' and 'make user_install'. Do NOT follow the rest
-    of these instructions.
+    of these instructions. Please check the QUICKSTART instead.
 
 
 =============================================================================
diff --git a/QUICKSTART b/QUICKSTART
index b2196aa9..bb964bfc 100644
--- a/QUICKSTART
+++ b/QUICKSTART
@@ -1,19 +1,43 @@
 LM_SENSORS QUICK INSTALLATION INSTRUCTIONS
 ------------------------------------------
 
-NOTE: PLEASE SKIM THE INSTALL DOCUMENT, OR BETTER YET READ IT CAREFULLY!
 The instructions in this document will generally work if you have a standard
 system, but not always!!
 
+The first part of document is for 2.6 kernel series, second part is for
+older 2.4 kernels.
+
+Quickstart for Kernel 2.6 
+-------------------------
+
+0) Just compile and install lm-sensors userspace tools. You can do that with:
+   'make user; make user_install'
+1) Make sure your kernel has support for all I2C bus drivers and
+   'i2c device interface'. If you are using a distribution kernel, all is
+   already prepared, you don't need to recompile it.
+2) Run 'sensors-detect' command, it will tell you what modules you need to load.
+3) Load them and run 'sensors' command, you should see some results.
+4) Find right section in /etc/sensors.conf, fix labels, limits, fan divisors
+5) Run 'sensors -s' to apply the changes.
+
+You may also try our installation wizard at:
+
+http://www.lm-sensors.org/wiki/iwizard/1
+
+We are aware that the documentation could be improved, please contact us if
+you want to help us with that.
+   
+Quickstart for Kernel 2.4
+-------------------------
+
+NOTE: PLEASE SKIM THE INSTALL DOCUMENT, OR BETTER YET READ IT CAREFULLY!
+
 Quickstart for i2c option 1 (modules) and lm_sensors option 1 (modules).
 This is by far the EASIEST METHOD.
 Other methods are described in INSTALL.
 ------------------------------------------
 
   * Verify you are running a 2.4 kernel, 2.4.10 or later.
-    If you are running a 2.5/2.6 kernel, the ONLY thing you need to
-    do is 'make user' and 'make user_install'. Do NOT follow the rest
-    of these instructions.
 
   * Make sure you have the kernel tree corresponding to your current
     kernel in /lib/modules/$(uname -r)/build.
diff --git a/README b/README
index ba7cf78e..5ffe406c 100644
--- a/README
+++ b/README
@@ -14,7 +14,8 @@ OVERVIEW OF THE LM_SENSORS PACKAGE AND SUMMARY OF SUPPORTED DEVICES
 FOR 2.6 KERNELS, use only the userspace tools in this package!
 Build and install them with 'make user' and 'make user_install'.
 The kernel modules in this package will NOT compile for 2.6;
-use the drivers already in the 2.6 kernel.
+use the drivers already in the 2.6 kernel. Check the QUICKSTART
+file for brief installation instructions please.
 
 =============================================================================