mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-21 19:51:45 +00:00
kernel module to enable i801 2443 device on Asus P4B boards.
from Ilja Rauhut <rauhut@alwa02.physik.uni-siegen.de> git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1329 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
1 parent
0c567ff863
commit
55552ad444
4 files changed
+377
No files matched your search
@@ -0,0 +1,35 @@
|
||||
# pcwd Kernel Module Makefile
|
||||
#
|
||||
|
||||
VERSION=1.40
|
||||
|
||||
VER = $(shell uname -r)
|
||||
INCLUDEDIR= /lib/modules/$(VER)/build/include
|
||||
|
||||
CFLAGS= -D__KERNEL__ -DMODULE -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -I$(INCLUDEDIR)
|
||||
|
||||
OBJS = p4b_smbus.o
|
||||
|
||||
all: $(OBJS)
|
||||
|
||||
install:
|
||||
$(MAKE)
|
||||
install -d /lib/modules/$(VER)/kernel/drivers/char
|
||||
install -c p4bsmbus.o /lib/modules/$(VER)/kernel/drivers/char
|
||||
# test ! -x /dev/watchdog || mknod -m 600 /dev/watchdog c 10 130
|
||||
# test ! -x /dev/temperature || mknod -m 600 /dev/temperature c 10 131
|
||||
|
||||
inst:
|
||||
$(MAKE)
|
||||
rmmod p4b_smbus
|
||||
install -d /lib/modules/$(VER)/kernel/drivers/char
|
||||
install -c p4b_smbus.o /lib/modules/$(VER)/kernel/drivers/char
|
||||
depmod -a
|
||||
# modprobe p4b_smbus
|
||||
|
||||
clean:
|
||||
rm -f *.o *~ core
|
||||
|
||||
cleandist:
|
||||
rm -f *.o *~ core
|
||||
|
||||
@@ -0,0 +1,69 @@
|
||||
What is it?
|
||||
-----------
|
||||
|
||||
This is just a quick and dirty hack to get the hardware monitoring working
|
||||
on the ASUS P4B board under Linux.
|
||||
ASUS switches of the SMBus PCI Device in the i801 ICH2 chip. I spoke two times
|
||||
with the German support an learned that: "We do not want the users to be
|
||||
irritated by just another PCI Device in the Win98 device manager."
|
||||
Really funny :-).
|
||||
|
||||
What does the module do?
|
||||
------------------------
|
||||
|
||||
It turnes off (!) the bits number 8 and 3 in the LPC register of the ICH2.
|
||||
This you can also try as root with setpci and pcitweak.
|
||||
First do a:
|
||||
|
||||
setpci -d 8086:2440 f2.w
|
||||
|
||||
You will get an hex number VAL - in my case 148 (Hex)-, where you have to
|
||||
erase the two bits - in my case you get 40 (Hex).
|
||||
Then do a:
|
||||
|
||||
setpci -d 8086:2440 f2.w=VAL
|
||||
|
||||
Running "lspci -n" you will not see any new device, but with "pcitweak -l" you
|
||||
should get a line similar to this in the output:
|
||||
|
||||
PCI: 00:1f:3: chip 8086,2443 card 1043,8028 rev 12 class 0c,05,00 hdr 00
|
||||
|
||||
The important thing is the "8086,2443" here.
|
||||
The device is activated, but not included in /proc/pci and
|
||||
/proc/bus/pci/devices. This is the reason for running the module.
|
||||
|
||||
What are the system requirements?
|
||||
---------------------------------
|
||||
|
||||
- Obviously a board with Intel i801BA ICH2 with broken bios.
|
||||
- A linux working with a 2.4 kernel AND hotplug support in it!
|
||||
- A installed kernel tree and gcc.
|
||||
- i2c and sensor modules installed.
|
||||
|
||||
How to install?
|
||||
---------------
|
||||
|
||||
Simply do a:
|
||||
|
||||
make -f Makefile.p4b
|
||||
insmod p4b_smbus.o
|
||||
modprobe i2c-core
|
||||
modprobe i2c-i801
|
||||
modprobe i2c-dev
|
||||
modprobe i2c-proc
|
||||
|
||||
Then run your sensor:
|
||||
|
||||
modprobe w83781d
|
||||
|
||||
What should i never do?
|
||||
-----------------------
|
||||
|
||||
Do not try to do a "rmmod p4b_smbus" before a "rmmod i2c-i801".
|
||||
The other way around should be okay. Otherwise you remove the PCI device
|
||||
without notifying the i2c driver.
|
||||
|
||||
|
||||
-------------------------------
|
||||
Ilja Rauhut <IljaRauhut@web.de>
|
||||
|
||||
@@ -0,0 +1,268 @@
|
||||
/*
|
||||
* p4b_smbus.c
|
||||
*
|
||||
* Initialize the I801SMBus device on ASUS P4B Bords
|
||||
*/
|
||||
/*
|
||||
Copyright (c) 2002 Ilja Rauhut <IljaRauhut@web.de>,
|
||||
|
||||
Based on the m7101.c hotplug example by:
|
||||
|
||||
Copyright (c) 2000 Burkhard Kohl <buk@buks.ipn.de>,
|
||||
Frank Bauer <frank.bauer@nikocity.de>, and
|
||||
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program; if not, write to the Free Software
|
||||
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
/* CHANGES:
|
||||
* February 13,2002 IR First Version
|
||||
*
|
||||
* This code is absolutely experimental - use it at your own
|
||||
* risk.
|
||||
*
|
||||
* Warning, this module will work only with 2.4.x kernels.
|
||||
* If it works with earlier kernels then it is by luck.
|
||||
*
|
||||
* Warning, this module does not work with egcs < 2.95.2, use
|
||||
* gcc > 2.7.2 or egcs >= 2.95.2.
|
||||
*
|
||||
*/
|
||||
|
||||
|
||||
#ifdef P4Bsmbus_DEBUG
|
||||
#define DBG(x...) printk(x)
|
||||
#else
|
||||
#define DBG(x...)
|
||||
#endif
|
||||
|
||||
#ifndef TRUE
|
||||
#define TRUE 1
|
||||
#define FALSE !TRUE
|
||||
#endif
|
||||
|
||||
#include <linux/config.h>
|
||||
#ifndef CONFIG_HOTPLUG
|
||||
#error ERROR - You must have 'Support for hot-pluggable devices' enabled in your kernel (under 'general setup')!!
|
||||
#endif
|
||||
|
||||
/* Deal with CONFIG_MODVERSIONS */
|
||||
#ifdef CONFIG_MODVERSIONS
|
||||
#define MODVERSIONS
|
||||
#include <linux/modversions.h>
|
||||
#endif
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/stddef.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <asm/types.h>
|
||||
|
||||
#include <linux/sched.h>
|
||||
#include <linux/signal.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
/*
|
||||
rmm from lm_sensors-2.3.3:
|
||||
*/
|
||||
|
||||
#define SMB_IO_SIZE 0xF
|
||||
#define SMB_BASE 0x20
|
||||
|
||||
/* status, used to indicate that io space needs to be freed */
|
||||
static struct pci_dev *i801smbus = NULL;
|
||||
static int i801smbus_inserted = FALSE;
|
||||
extern void cleanup_module();
|
||||
|
||||
static rwlock_t i801smbus_lock = RW_LOCK_UNLOCKED;
|
||||
static unsigned long i801smbus_lock_flags = 0;
|
||||
|
||||
/*
|
||||
* Checks whether SMBus is enabled and turns it on in case they are not.
|
||||
* It's done by clearing Bit 8 and 4 in i801 config space F2h, PCI-Device 0x8086:0x2440
|
||||
*/
|
||||
static int
|
||||
i801smbus_enable(struct pci_dev *dev){
|
||||
u16 val = 0;
|
||||
|
||||
pci_read_config_word(dev, 0xF2, &val);
|
||||
DBG("i801smbus: i801smbus config byte reading 0x%X.\n", val);
|
||||
if (val & 0x008) {
|
||||
pci_write_config_word(dev, 0xF2, val & 0x77);
|
||||
pci_read_config_word(dev, 0xF2, &val);
|
||||
if(val & 0x008)
|
||||
{
|
||||
DBG("i801smbus: i801smbus config byte locked:-(\n");
|
||||
return -EIO;
|
||||
}
|
||||
else
|
||||
printk("SMBus activated in LPC!\n");
|
||||
}
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* Builds the basic pci_dev for the i801smbus
|
||||
*/
|
||||
static int i801smbus_build(struct pci_dev **i801smbus, struct pci_bus *bus)
|
||||
{
|
||||
u32 devfn;
|
||||
u16 id = 0;
|
||||
u16 vid = 0;
|
||||
int ret;
|
||||
|
||||
DBG("i801smbus: requesting kernel space for the i801smbus entry.\n");
|
||||
*i801smbus = kmalloc(sizeof(**i801smbus), GFP_ATOMIC);
|
||||
if(NULL == *i801smbus) {
|
||||
printk("i801smbus: out of memory.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
/* minimally fill in structure for search */
|
||||
/* The device should be on the same bus as the i801. */
|
||||
memset(*i801smbus, 0, sizeof(**i801smbus));
|
||||
(*i801smbus)->bus = bus;
|
||||
(*i801smbus)->sysdata = bus->sysdata;
|
||||
(*i801smbus)->hdr_type = PCI_HEADER_TYPE_NORMAL;
|
||||
|
||||
DBG("i801smbus: now looking for i801smbus.\n");
|
||||
for (id = 0, devfn = 0; devfn < 0xFF; devfn++) {
|
||||
(*i801smbus)->devfn = devfn;
|
||||
ret = pci_read_config_word(*i801smbus, PCI_DEVICE_ID, &id);
|
||||
if (ret == 0 && 0x2443 == id) {
|
||||
pci_read_config_word(*i801smbus, PCI_VENDOR_ID, &vid);
|
||||
if(vid == 0x8086)
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (0x2443 != id) {
|
||||
DBG("i801smbus: i801smbus not found although i801 present - strange.\n");
|
||||
return -EACCES;
|
||||
} else {
|
||||
DBG("i801smbus: i801smbus found and enabled. Devfn: 0x%X.\n", devfn);
|
||||
}
|
||||
/* We now have the devfn and bus of the i801smbus device.
|
||||
* let's put the rest of the device data together.
|
||||
*/
|
||||
|
||||
(*i801smbus)->vendor = 0x8086;
|
||||
(*i801smbus)->hdr_type = PCI_HEADER_TYPE_NORMAL;
|
||||
(*i801smbus)->device = 0x2443;
|
||||
|
||||
return(pci_setup_device(*i801smbus));
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
/* Initialize the module */
|
||||
int init_module(void)
|
||||
{
|
||||
struct pci_bus *bus = NULL;
|
||||
struct pci_dev *dev = NULL;
|
||||
int ret = 0;
|
||||
|
||||
DBG("i801smbus: init_module().\n");
|
||||
|
||||
/* Are we on a PCI-Board? */
|
||||
if (!pci_present()) {
|
||||
printk("i801smbus: No PCI bus found - sorry.\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* We want to be sure that the i801smbus is not present yet. */
|
||||
dev = pci_find_device(0x8086,0x2443, NULL);
|
||||
|
||||
if (dev)
|
||||
{
|
||||
printk("i801smbus: SMBus already actve\n");
|
||||
return -EPERM;
|
||||
}
|
||||
|
||||
/* Are we operating a i801 chipset */
|
||||
dev = pci_find_device(0x8086,0x2440, NULL);
|
||||
if (NULL == dev)
|
||||
{
|
||||
printk("INTEL ICH2 type 82801BA not found.\n");
|
||||
return -ENODEV ;
|
||||
}
|
||||
/* we need the bus pointer later */
|
||||
bus = dev->bus;
|
||||
|
||||
|
||||
if ( (ret = i801smbus_enable(dev)) )
|
||||
{
|
||||
printk("i801smbus: Unable to turn on i801smbus device - sorry!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if ( (ret = i801smbus_build(&i801smbus, bus)) )
|
||||
return ret;
|
||||
|
||||
|
||||
if ( (ret = pci_enable_device(i801smbus)) ) {
|
||||
printk("i801smbus: Unable to pci_enable i801smbus device!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
DBG("i801smbus: now inserting.\n");
|
||||
pci_insert_device(i801smbus, i801smbus->bus);
|
||||
printk("i801smbus: Enabled\n");
|
||||
i801smbus_inserted = TRUE;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
void cleanup_module()
|
||||
{
|
||||
write_lock_irqsave(i801smbus_lock, i801smbus_lock_flags);
|
||||
if (i801smbus_inserted) {
|
||||
pci_remove_device(i801smbus);
|
||||
i801smbus_inserted = FALSE;
|
||||
}
|
||||
write_unlock_irqrestore(i801smbus_lock, i801smbus_lock_flags);
|
||||
|
||||
if (NULL != i801smbus)
|
||||
{
|
||||
kfree(i801smbus);
|
||||
}
|
||||
printk("i801smbus: SMBus device removed\n");
|
||||
}
|
||||
|
||||
EXPORT_NO_SYMBOLS;
|
||||
|
||||
#ifdef MODULE
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Ilja Rauhut <IljaRauhut@web.de>, "
|
||||
"Burkhard Kohl <bku@buks.ipn.de>, "
|
||||
"Frank Bauer <frank.bauer@nikocity.de>, "
|
||||
"and Mark Studebaker <mdsxyz123@yahoo.com>");
|
||||
MODULE_DESCRIPTION("i801smbus PCI Inserter");
|
||||
|
||||
#endif /* MODULE */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in new issue
Block a user