From 5a84d36a5f86ebf410fc560fd6a6e5a8ee2a8e49 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 25 Jan 2004 17:36:31 +0000 Subject: [PATCH] Limit initializations for adm1025/ne1619. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2244 7894878c-1315-0410-8ee3-d5d059ff63e0 --- etc/sensors.conf.eg | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg index b206f053..c4a88870 100644 --- a/etc/sensors.conf.eg +++ b/etc/sensors.conf.eg @@ -1149,6 +1149,21 @@ chip "adm1025-*" "ne1619-*" label in4 "+12V" label in5 "VCC" +# Tolerate a 5% deviance for CPU power-supply + set in1_min vid * 0.95 + set in1_max vid * 1.05 +# Tolerate a 10% deviance for other voltages + set in0_min 2.5 * 0.90 + set in0_max 2.5 * 1.10 + set in2_min 3.3 * 0.90 + set in2_max 3.3 * 1.10 + set in3_min 5.0 * 0.90 + set in3_max 5.0 * 1.10 + set in4_min 12 * 0.90 + set in4_max 12 * 1.10 + set in5_min 3.3 * 0.90 + set in5_max 3.3 * 1.10 + # Depending on how your chipset is hardwired, you may or may not have # +12V readings (will show as 0.0V if you don't have it). # ignore in4 @@ -1157,15 +1172,17 @@ chip "adm1025-*" "ne1619-*" # redundant with +3.3V so you may want to hide it. # ignore in5 - label temp1 "CPU Temp" - label temp2 "M/B Temp" - -# adjust this if your vid is wrong; see doc/vid +# Adjust this if your vid is wrong; see doc/vid set vrm 9.0 -# Tolerate a 5% deviance for CPU power-supply (default is 10%) - set in1_min vid * 0.95 - set in1_max vid * 1.05 +# Temperatures + label temp1 "CPU Temp" + label temp2 "M/B Temp" + set temp1_low 10 + set temp1_high 60 + set temp2_low 10 + set temp2_high 45 + chip "lm87-*" #