diff --git a/configs/SuperMicro/X8DTL-I.conf b/configs/SuperMicro/X8DTL-I.conf
new file mode 100644
index 00000000..b6c17a39
--- /dev/null
+++ b/configs/SuperMicro/X8DTL-I.conf
@@ -0,0 +1,115 @@
+# Config for a Supermicro X8DTL-I
+# Sensors guessed from HWiNFO
+# Originally written by Steve-Tech and renardein
+# Based on Supremicro X8DTN, C7X58 and HP N40L configurations
+# Also compatible with all X8DTL-* motherboards
+# 2 March 2023
+
+# Modules:
+# w83795
+# coretemp
+# jc42
+
+# Board has two sensor chips, w83627dhg is not used for temperature,
+# fans or voltage sensing. sensors-detect will suggest that you load the
+# w83627ehf driver but you shouldn't.
+
+# config for w83795adg chip
+bus "i2c-0" "SMBus I801 adapter at 0400"
+chip "w83795adg-i2c-0-2f"
+	label in0 "CPU1 VDD"
+	label in1 "CPU2 VDD"
+	label in2 "CPU1 DIMM"
+	label in3 "CPU2 DIMM"
+	label in4 "+5V"
+	label in5 "5VSB"
+	label in6 "+12V"
+	label in7 "-12V"
+	label in11 "VTT"
+	label in12 "+3.3V"
+	label in13 "3VSB"
+	label in14 "VBAT"
+	label fan1 "FAN 1"
+	label fan2 "FAN 2"
+	label fan3 "FAN 3"
+	label fan4 "FAN 4"
+	label fan5 "FAN 5"
+	label fan6 "FAN 6"
+	label beep_enable "Beep"
+	label intrusion0 "Intrusion"
+	label temp5 "Motherboard"
+
+	ignore temp1 # Chipset temperature taken from PECI
+	ignore temp7 
+	ignore temp8
+
+	compute in4 @*4, @/4
+	compute in5 @*4, @/4
+	compute in6 @*6.62, @/6.62 
+	compute in7 -@*8, -@/8
+	# Voltage Limits
+	# CPU
+	set in0_min  0.82
+	set in0_max  1.35
+	set in1_min  0.82
+	set in1_max  1.35
+	#DIMM
+	set in2_min  1.35
+	set in2_max  1.55
+	set in3_min  1.35
+	set in3_max  1.55
+	#+3.3V
+	set in12_min 3.135
+	set in12_max 3.465
+	#+5V and +5VSB
+	set in4_min 4.750
+	set in4_max 5.250
+	set in5_min 4.750
+	set in5_max 5.250
+	#+12V and -12V
+	set in6_min 11.400
+	set in6_max 12.600
+	set in7_min 10.800
+	set in7_max 13.200	
+	#VTT Fix
+	# The BIOS does not set the correct limits for VTT, but it is wired.
+	set in11_min 1.00	 
+	set in11_max 1.25
+	#FAN Limits
+	set fan1_min 700
+	set fan2_min 700
+	set fan3_min 700
+	set fan4_min 700
+	set fan5_min 700
+	set fan6_min 700
+	
+#config for coretemp 1
+chip "coretemp-isa-0000"
+	label temp2 "CPU 1 Core 1"
+	label temp3 "CPU 1 Core 2"
+	label temp4 "CPU 1 Core 3"
+	label temp5 "CPU 1 Core 4"
+	label temp6 "CPU 1 Core 5"
+	label temp7 "CPU 1 Core 6"
+
+#config for coretemp 2
+chip "coretemp-isa-0001"
+	label temp2 "CPU 2 Core 1"
+	label temp3 "CPU 2 Core 2"
+	label temp4 "CPU 2 Core 3"
+	label temp5 "CPU 2 Core 4"
+	label temp6 "CPU 2 Core 5"
+	label temp7 "CPU 2 Core 6"
+
+#config for intel5500
+chip "intel5500-pci-00a3"
+	label temp1 "Chipset"
+#config for DIMM's
+chip "jc42-i2c-0-1a"
+	label temp1 "DIMM0 Temp"
+	
+chip "jc42-i2c-0-18"
+	label temp1 "DIMM2 Temp"
+
+chip "jc42-i2c-0-1c"
+	label temp1 "DIMM4 Temp"
\ No newline at end of file