diff --git a/CHANGES b/CHANGES
index ab78372a..d9e424d5 100644
--- a/CHANGES
+++ b/CHANGES
@@ -16,6 +16,7 @@ SVN HEAD
   Man page sensors.conf.5: Update the chip statement section
   Module i2c-nforce2: Add nForce MCP61, MCP65 support (2.6 backport)
   Module lm85: Fix setting the fan speed min limit to 0
+               Add support for the EMC6D102 extra resolution bits
   Module thmc50: Fix the i2c address range
   Module w83627ehf: New (2.6 backport)
   Programs i2cdump, i2cget, i2cset: Do not force the slave address by default
@@ -43,6 +44,7 @@ SVN HEAD
                    Add support for the w83627ehf VID function
                    Add support for the w83627ehf thermal sensor types
                    Add support for it87 fan4 and fan5
+                   Display the extra resolution bits of the emc6d102
   Program sensors-detect: Stop Super-I/O probe after first family success
                           Fix SMSC DME1737 detection
                           Add /usr/sbin to the PATH (#2199)
diff --git a/kernel/chips/lm85.c b/kernel/chips/lm85.c
index b03128ce..160d16b7 100644
--- a/kernel/chips/lm85.c
+++ b/kernel/chips/lm85.c
@@ -165,6 +165,11 @@ SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
 #define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2)
 #define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2)
 
+#define EMC6D102_REG_EXTEND_ADC1 0x85
+#define EMC6D102_REG_EXTEND_ADC2 0x86
+#define EMC6D102_REG_EXTEND_ADC3 0x87
+#define EMC6D102_REG_EXTEND_ADC4 0x88
+
 /* Conversions. Rounding and limit checking is only done on the TO_REG 
    variants. Note that you should be a bit careful with which arguments
    these macros are called: arguments may be evaluated more than once.
@@ -1162,6 +1167,26 @@ static void lm85_update_client(struct i2c_client *client)
 			    lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
 
 			break ;
+		case emc6d102 :
+			/* Have to read LSB bits after the MSB ones because
+			   the reading of the MSB bits has frozen the
+			   LSBs (backward from the ADM1027).
+			   We use only two extra bits per channel, and encode
+			   them in the same format the ADM1027 uses, to keep the
+			   rest of the code unchanged.
+			 */
+			i = lm85_read_value(client, EMC6D102_REG_EXTEND_ADC1);
+			data->extend_adc = (i & 0xcc) << 8; /* temp3, temp1 */
+			i = lm85_read_value(client, EMC6D102_REG_EXTEND_ADC2);
+			data->extend_adc |= (i & 0x0c) << 10; /* temp2 */
+			data->extend_adc |= (i & 0xc0) << 2; /* in4 */
+			i = lm85_read_value(client, EMC6D102_REG_EXTEND_ADC3);
+			data->extend_adc |= (i & 0x0c) >> 2; /* in0 */
+			data->extend_adc |= i & 0xc0; /* in3 */
+			i = lm85_read_value(client, EMC6D102_REG_EXTEND_ADC4);
+			data->extend_adc |= i & 0x0c; /* in1 */
+			data->extend_adc |= (i & 0xc0) >> 2; /* in2 */
+			break;
 		default : break ; /* no warnings */
 		}
 
diff --git a/prog/sensors/chips.c b/prog/sensors/chips.c
index f4d407ae..b3c30efe 100644
--- a/prog/sensors/chips.c
+++ b/prog/sensors/chips.c
@@ -1558,12 +1558,13 @@ void print_lm85(const sensors_chip_name *name)
   char *label;
   double cur, min, max;
   int alarms, alarm_mask = 0, valid;
-  int is1027, is7463, is6d100;
+  int is1027, is7463, is6d100, xadc;
 
   is1027 = !strcmp(name->prefix,"adm1027")
            || !strcmp(name->prefix,"adt7463") ;
   is7463 = !strcmp(name->prefix, "adt7463");
   is6d100 = !strcmp(name->prefix,"emc6d100") ;
+  xadc = is1027 || !strcmp(name->prefix, "emc6d102");
 
   if (!sensors_get_feature(*name,SENSORS_LM85_ALARMS,&cur)) 
     alarms = cur + 0.5;
@@ -1584,7 +1585,7 @@ void print_lm85(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       printf("%+7.*f V  (min = %+6.2f V, max = %+6.2f V)   %s",
-           (is1027?3:2),cur,min,max,alarms&LM85_ALARM_IN0?"ALARM":"");
+           (xadc?3:2),cur,min,max,alarms&LM85_ALARM_IN0?"ALARM":"");
       if (is1027) { printf(alarm_mask&LM85_ALARM_IN0?" MASKED":""); }
       putchar( '\n' );
     }
@@ -1598,7 +1599,7 @@ void print_lm85(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       printf("%+7.*f V  (min = %+6.2f V, max = %+6.2f V)   %s",
-           (is1027?3:2),cur,min,max,alarms&LM85_ALARM_IN1?"ALARM":"");
+           (xadc?3:2),cur,min,max,alarms&LM85_ALARM_IN1?"ALARM":"");
       if (is1027) { printf(alarm_mask&LM85_ALARM_IN1?" MASKED":""); }
       putchar( '\n' );
     }
@@ -1612,7 +1613,7 @@ void print_lm85(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       printf("%+7.*f V  (min = %+6.2f V, max = %+6.2f V)   %s",
-           (is1027?3:2),cur,min,max,alarms&LM85_ALARM_IN2?"ALARM":"");
+           (xadc?3:2),cur,min,max,alarms&LM85_ALARM_IN2?"ALARM":"");
       if (is1027) { printf(alarm_mask&LM85_ALARM_IN2?" MASKED":""); }
       putchar( '\n' );
     }
@@ -1626,7 +1627,7 @@ void print_lm85(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       printf("%+7.*f V  (min = %+6.2f V, max = %+6.2f V)   %s",
-           (is1027?3:2),cur,min,max,alarms&LM85_ALARM_IN3?"ALARM":"");
+           (xadc?3:2),cur,min,max,alarms&LM85_ALARM_IN3?"ALARM":"");
       if (is1027) { printf(alarm_mask&LM85_ALARM_IN3?" MASKED":""); }
       putchar( '\n' );
     }
@@ -1640,7 +1641,7 @@ void print_lm85(const sensors_chip_name *name)
     if (valid) {
       print_label(label,10);
       printf("%+7.*f V  (min = %+6.2f V, max = %+6.2f V)   %s",
-           (is1027?3:2),cur,min,max,alarms&LM85_ALARM_IN4?"ALARM":"");
+           (xadc?3:2),cur,min,max,alarms&LM85_ALARM_IN4?"ALARM":"");
       if (is1027) { printf(alarm_mask&LM85_ALARM_IN4?" MASKED":""); }
       putchar( '\n' );
     }
@@ -1746,7 +1747,7 @@ void print_lm85(const sensors_chip_name *name)
       !sensors_get_feature(*name,SENSORS_LM85_TEMP1_MAX,&max)) {
     if (valid) {
       print_label(label,10);
-      print_temp_info( cur, max, min, MINMAX, (is1027 ? 2 : 0), 0);
+      print_temp_info( cur, max, min, MINMAX, (xadc ? 2 : 0), 0);
       printf( "   %s %s %s\n",
                  alarms&LM85_ALARM_TEMP1?"ALARM":"",
                  alarms&LM85_ALARM_TEMP1_FAULT?"FAULT":"",
@@ -1762,7 +1763,7 @@ void print_lm85(const sensors_chip_name *name)
       !sensors_get_feature(*name,SENSORS_LM85_TEMP2_MAX,&max)) {
     if (valid) {
       print_label(label,10);
-      print_temp_info( cur, max, min, MINMAX, (is1027 ? 2 : 0), 0);
+      print_temp_info( cur, max, min, MINMAX, (xadc ? 2 : 0), 0);
       printf( "   %s %s\n",
                  alarms&LM85_ALARM_TEMP2?"ALARM":"",
                  is1027&&(alarm_mask&LM85_ALARM_TEMP2)?"MASKED":""
@@ -1777,7 +1778,7 @@ void print_lm85(const sensors_chip_name *name)
       !sensors_get_feature(*name,SENSORS_LM85_TEMP3_MAX,&max)) {
     if (valid) {
       print_label(label,10);
-      print_temp_info( cur, max, min, MINMAX, (is1027 ? 2 : 0), 0);
+      print_temp_info( cur, max, min, MINMAX, (xadc ? 2 : 0), 0);
       printf( "   %s %s %s\n",
                  alarms&LM85_ALARM_TEMP3?"ALARM":"",
                  alarms&LM85_ALARM_TEMP3_FAULT?"FAULT":"",