Support the LM99 (and LM89).

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2471 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Jean Delvare committed 2004-04-24 08:10:48 +00:00
1 parent 07575dbb7f
commit 635b1b06bc
8 files changed
+83 -56

No files matched your search

+40 -10
View File
@@ -1,7 +1,7 @@
/*
* lm90.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (C) 2003 Jean Delvare <khali@linux-fr.org>
* Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
*
* Based on the lm83 driver. The LM90 is a sensor chip made by National
* Semiconductor. It reports up to two temperatures (its own plus up to
@@ -10,6 +10,17 @@
* obtained from National's website at:
* http://www.national.com/pf/LM/LM90.html
*
* This driver also supports the LM89 and LM99, two other sensor chips
* made by National Semiconductor. Both have an increased remote
* temperature measurement accuracy (1 degree), and the LM99
* additionally shifts remote temperatures (measured and limits) by 16
* degrees, which allows for higher temperatures measurement. The
* driver doesn't handle it since it can be done easily in user-space.
* Complete datasheets can be obtained from National's website at:
* http://www.national.com/pf/LM/LM89.html
* http://www.national.com/pf/LM/LM99.html
* Note that there is no way to differenciate between both chips.
*
* This driver also supports the ADM1032, a sensor chip made by Analog
* Devices. That chip is similar to the LM90, with a few differences
* that are not handled by this driver. Complete datasheet can be
@@ -49,9 +60,11 @@
/*
* Addresses to scan
* Address is fully defined internally and cannot be changed.
* LM89, LM90, LM99 and ADM1032 have address 0x4c.
* LM89-1, and LM99-1 have address 0x4d.
*/
static unsigned short normal_i2c[] = { 0x4c, SENSORS_I2C_END };
static unsigned short normal_i2c[] = { 0x4c, 0x4d, SENSORS_I2C_END };
static unsigned short normal_i2c_range[] = { SENSORS_I2C_END };
static unsigned int normal_isa[] = { SENSORS_ISA_END };
static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
@@ -60,7 +73,7 @@ static unsigned int normal_isa_range[] = { SENSORS_ISA_END };
* Insmod parameters
*/
SENSORS_INSMOD_2(lm90, adm1032);
SENSORS_INSMOD_3(lm90, adm1032, lm99);
/*
* The LM90 registers
@@ -325,18 +338,30 @@ static int lm90_detect(struct i2c_adapter *adapter, int address,
if (man_id == 0x01) /* National Semiconductor */
{
if (chip_id >= 0x21 && chip_id < 0x30 /* LM90 */
&& (kind == 0 /* skip detection */
|| ((i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONFIG2) & 0xF8) == 0x00
&& reg_convrate <= 0x09)))
u8 reg_config2;
reg_config2 = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONFIG2);
if (kind == 0 /* skip detection */
|| ((reg_config2 & 0xF8) == 0x00
&& reg_convrate <= 0x09))
{
kind = lm90;
if (address == 0x4C
&& (chip_id & 0xF0) == 0x20) /* LM90 */
{
kind = lm90;
}
else if ((chip_id & 0xF0) == 0x30) /* LM89/LM99 */
{
kind = lm99;
}
}
}
else if (man_id == 0x41) /* Analog Devices */
{
if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
if (address == 0x4C
&& (chip_id & 0xF0) == 0x40 /* ADM1032 */
&& (kind == 0 /* skip detection */
|| (reg_config1 & 0x3F) == 0x00))
{
@@ -361,6 +386,11 @@ static int lm90_detect(struct i2c_adapter *adapter, int address,
type_name = "adm1032";
client_name = "ADM1032 chip";
}
else if (kind == lm99)
{
type_name = "lm99";
client_name = "LM99 chip";
}
else
{
printk("lm90.o: Unknown kind %d.\n", kind);