diff --git a/prog/init/lm_sensors.init.suse b/prog/init/lm_sensors.init.suse
new file mode 100755
index 00000000..8b17af03
--- /dev/null
+++ b/prog/init/lm_sensors.init.suse
@@ -0,0 +1,174 @@
+#!/bin/sh
+#
+### BEGIN INIT INFO
+# Provides:			lm_sensors
+# Required-Start:		$local_fs 
+# X-UnitedLinux-Should-Start:	
+# Required-Stop:		$local_fs 
+# X-UnitedLinux-Should-Stop:	
+# Default-Start:		3 4 5
+# Default-Stop:			0 1 2 6
+# Short-Description:		LM Sensors
+# Description:			LM Sensors for hardware monitoring
+### END INIT INFO
+# chkconfig: 2345 26 74
+# description: sensors is used for monitoring motherboard sensor values.
+# config: /etc/sysconfig/sensors
+#
+#    This program is free software; you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation; either version 2 of the License, or
+#    (at your option) any later version.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program; if not, write to the Free Software
+#    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+# See also the lm_sensors homepage at:
+#     http://www2.lm-sensors.nu/~lm78/index.html
+
+# It uses a config file /etc/sysconfig/sensors that contains the modules to
+# be loaded/unloaded. That file is sourced into this one.
+
+# The format of that file a shell script that simply defines the modules 
+# in order as normal shell variables with the special names:
+#    MODULE_1, MODULE_2, MODULE_3, etc.
+
+# If sensors isn't supported by the kernel, try loading the module...
+[ -e /proc/sys/dev/sensors ] || /sbin/modprobe i2c-proc &>/dev/null
+
+# Don't bother if /proc/sensors still doesn't exist, kernel doesn't have
+# support for sensors.
+[ -e /proc/sys/dev/sensors ] || exit 0
+
+# If sensors was not already running, unload the module...
+[ -e /var/lock/subsys/sensors ] || /sbin/modprobe -r i2c-proc &>/dev/null
+
+CONFIG=/etc/sysconfig/lm_sensors
+PSENSORS=/usr/local/bin/sensors
+
+# Source function library.
+#. /etc/init.d/functions
+
+# Shell functions sourced from /etc/rc.status:
+#      rc_check         check and set local and overall rc status
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     ditto but be verbose in local rc status
+#      rc_status -v -r  ditto and clear the local rc status
+#      rc_status -s     display "skipped" and exit with status 3
+#      rc_status -u     display "unused" and exit with status 3
+#      rc_failed        set local and overall rc status to failed
+#      rc_failed <num>  set local and overall rc status to <num>
+#      rc_reset         clear local rc status (overall remains)
+#      rc_exit          exit appropriate to overall rc status
+#      rc_active	checks whether a service is activated by symlinks
+#      rc_splash arg    sets the boot splash screen to arg (if active)
+. /etc/rc.status
+
+# Reset status of this service
+rc_reset
+
+# Return values acc. to LSB for all commands but status:
+# 0	  - success
+# 1       - generic or unspecified error
+# 2       - invalid or excess argument(s)
+# 3       - unimplemented feature (e.g. "reload")
+# 4       - user had insufficient privileges
+# 5       - program is not installed
+# 6       - program is not configured
+# 7       - program is not running
+# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
+# 
+# Note that starting an already running service, stopping
+# or restarting a not-running service as well as the restart
+# with force-reload (in case signaling is not supported) are
+# considered a success.
+
+RETVAL=0
+
+start() {
+	echo -n $"Starting up sensors: "
+	test -r "$CONFIG" && . "$CONFIG"
+
+        modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '`
+        i=0
+        while [ $i -lt $modules ] ; do
+                module=`eval echo '$'MODULE_$i`
+		echo starting module __${module}__
+		/sbin/modprobe $module &>/dev/null
+		i=`expr $i + 1`
+	done
+        $PSENSORS -s
+
+	RETVAL=$?
+	if [ $RETVAL -eq 0 ] && touch /var/lock/subsys/sensors ; then
+	    rc_status -v
+	else
+	    rc_status -v
+	fi
+}
+
+stop() {
+	echo -n $"Shutting down sensors: "
+	test -r "$CONFIG" && . "$CONFIG"
+
+        modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '`
+        i=`expr $modules`
+        while [ $i -ge 0 ] ; do
+                module=`eval echo '$'MODULE_$i`
+		/sbin/modprobe -r $module &>/dev/null
+		i=`expr $i - 1`
+	done
+	/sbin/modprobe -r i2c-proc &>/dev/null
+
+	RETVAL=$?
+	if [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/sensors ; then
+	    rc_status -v
+	else
+	    rc_status -v
+	fi
+}
+
+dostatus() {
+        $PSENSORS
+	RETVAL=$?
+}
+
+restart() {
+	stop
+	start
+	RETVAL=$?
+}
+
+condrestart() {
+	[ -e /var/lock/subsys/sensors ] && restart || :
+}
+
+# See how we were called.
+case "$1" in
+  start)
+	start
+	;;
+  stop)
+	stop
+	;;
+  status)
+	dostatus
+	;;
+  restart|reload)
+	restart
+	;;
+  condrestart)
+	condrestart
+	;;
+  *)
+	echo "Usage: sensors.init {start|stop|status|restart|reload|condrestart}"
+	exit 1
+esac
+
+exit $RETVAL