Even more documentation updates

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@409 7894878c-1315-0410-8ee3-d5d059ff63e0

doc/modules

@@ -2,6 +2,9 @@ This is a list of modules, the modules they depend on, and the module
 parameters they define. First, some things about managing all these 
 modules.
 
+Managing Modules
+================
+
 The hardcore way is to insmod each of them by hand. This is not very
 practical, though. It is better to install them in a subdirectory that
 modprobe examines. /lib/modules/current/extra/misc comes to mind.
@@ -11,8 +14,10 @@ which file is used depends on your distribution):
     path[misc]=/lib/modules/current/extra/misc
   (modutils-2.1.x):
     path=/lib/modules/current/extra
-Do always a 'killall -HUP kerneld; depmod -a' after changing either your
-configuration file or changing a module in one of the module directories.
+Do always a 'depmod -a' after changing either your configuration file or 
+changing a module in one of the module directories; you also need to do
+a 'killall -HUP kerneld' if you still use kerneld (kernel 2.2.x usually
+uses kmod.
 
 Now you can do 'modprobe lm78', and all dependent modules are loaded
 automatically. You could, of course, add this statement (and related
@@ -41,6 +46,12 @@ With the above, the managing of all those modules is suddenly no problem
 at all!
 
 
+Available Modules
+=================
+
+This does not list the chip and bus drivers; please examine the directories
+doc/chips and doc/busses for more information about them.
+
 (i2c) i2c-core:
   The core i2c module (surprise!). Almost everything else depends on this one.
   Module parameters:
@@ -56,16 +67,6 @@ at all!
   SMBus emulation on i2c busses. Base algorithm, on which SMBus-only adapters
   rely.
 
-(src/busses) i2c-piix4: smbus i2c-core
-  PIIX4 SMBus access.
-
-(src/busses) i2c-via: algo-bit i2c-core
-  VIA VT82C586B bus access. This is often used instead of the PIIX4 as SMBus
-  host.
-
-(src/busses) i2c-ali15x3: smbus i2c-core
-  Acer Labs M1541 and M1543C bus access.
-
 (src/busses) i2c-isa: i2c-core
   Defines the ISA bus as being a I2C adapter. It isn't, of course; but this is
   often used by sensor client modules, to keep the code small and simple.
@@ -73,34 +74,6 @@ at all!
 (src) sensors: i2c-core
   General purpose routines for sensor client modules
 
-(src/chips) lm78: sensors smbus i2c-core
-  LM78, LM78-J and LM79 chip driver
-
-(src/chips) lm75: sensors smbus i2c-core
-  LM75 chip driver
-
-(src/chips) gl518sm: sensors smbus i2c-core
-  GL518SM revision 0x00 and 0x80 chip driver
-
-(src/chips) adm1021: sensors smbus i2c-core
-  ADM1021 and MAX1617 chip driver 
-
-(src/chips) adm9240: sensors smbus i2c-core
-  ADM9240 chip driver
-
-(src/chips) ltc1710: sensors smbus i2c-core
-  LTC1710 chip driver
-
-(src/chips) sis5595: sensors smbus i2c-core
-  SIS-5595 chipset hardware monitor driver
-
-(src/chips) w83781d: sensors smbus i2c-core
-  W83781D chip driver
-
-(src/chips) eeprom: sensors smbus i2c-core
-  Driver for DIMMs connected to the SMBus. You need prog/eeprom/decode-dimms.pl
-  to make sense of its output.
-
 (i2c) algo-bit: i2c-core
   The 'bit' algorithm, used by many i2c adapters
   Module parameters:
@@ -133,6 +106,7 @@ i2c/old-code.
 Usually, if you load the modules through modprobe, you need the following
 commands:
   modprobe i2c-proc
+  modprobe i2c-dev  # Often not needed; see above
   modprobe i2c-isa  # Unless you are certain no sensor chips live on the ISA bus
   modprobe i2c-piix4 # One such line for each adapter you own
   modprobe lm78     # One such line for each device you own