Delete all kernel chip drivers, documentation and references. We are

moving to a user-space-only package, all the drivers are maintained in
the Linux kernel tree itself.

I tried to update the documentation a bit, but there's still a lot to
go. In fact, a complete rewrite seems to be needed.


git-svn-id: http://lm-sensors.org/svn/lm-sensors/branches/lm-sensors-3.0.0@4397 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Jean Delvare committed 2007-05-09 13:00:30 +00:00
1 parent 448c4a70e9
commit 9232f4eb43
136 files changed
+1633 -55767

No files matched your search

+1 -53
View File
@@ -4,14 +4,11 @@ LM_SENSORS QUICK INSTALLATION INSTRUCTIONS
The instructions in this document will generally work if you have a standard
system, but not always!!
The first part of document is for 2.6 kernel series, second part is for
older 2.4 kernels.
Quickstart for Kernel 2.6
-------------------------
0) Just compile and install lm-sensors userspace tools. You can do that with:
'make user; make user_install'
'make ; make install'
1) Make sure your kernel has support for all I2C bus drivers and
'i2c device interface'. If you are using a distribution kernel, all is
already prepared, you don't need to recompile it.
@@ -26,52 +23,3 @@ http://www.lm-sensors.org/wiki/iwizard/1
We are aware that the documentation could be improved, please contact us if
you want to help us with that.
Quickstart for Kernel 2.4
-------------------------
NOTE: PLEASE SKIM THE INSTALL DOCUMENT, OR BETTER YET READ IT CAREFULLY!
Quickstart for i2c option 1 (modules) and lm_sensors option 1 (modules).
This is by far the EASIEST METHOD.
Other methods are described in INSTALL.
------------------------------------------
* Verify you are running a 2.4 kernel, 2.4.10 or later.
* Make sure you have the kernel tree corresponding to your current
kernel in /lib/modules/$(uname -r)/build.
Even if the source is there, it may not correspond to your running
kernel. If so, you will have to recompile your kernel.
* Verify that your i2c support in the kernel is configured as
modules or is disabled. If it is compiled-in, you obviously
cannot replace it with modules in the next step.
* Do `lsmod'. If there are any old i2c or sensors modules loaded,
you MUST remove them (as root) with `rmmod'.
* Download, build, and install the latest i2c package,
(i2c-2.9.0 or later). The i2c subsystem found in the Linux 2.4
kernel trees, even the latest ones, is outdated and won't work.
Quickstart for i2c: make; (as root) make install
* Go back to the lm_sensors directory. Do `make'.
The warnings about .d files at the start are harmless.
* Do (as root) `make install'.
* Verify that /usr/local/lib is listed in /etc/ld.so.conf;
if it isn't, add it, then run (as root) `ldconfig'.
* Run (as root) `prog/mkdev/mkdev.sh' to create the device files,
unless you already have them or are running devfs or udev.
* Run (as root) `prog/detect/sensors-detect' to detect your hardware,
put the lines it suggests into /etc/modules.conf, and run all
the commands it suggests (`modprobe X', `sensors -s').
* Run `sensors' to see your output.
* That's it! If you have problems, read our excellent FAQ
(doc/FAQ or doc/lm_sensors-FAQ.html).