From 93c5a309064c5472a3ec70c9fbd102c87033a8ee Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 29 Jul 2003 10:27:36 +0000 Subject: [PATCH] Updates to the adm1025-* section. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1913 7894878c-1315-0410-8ee3-d5d059ff63e0 --- etc/sensors.conf.eg | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg index 6e100261..366b3a80 100644 --- a/etc/sensors.conf.eg +++ b/etc/sensors.conf.eg @@ -198,6 +198,7 @@ # This is a library dependency. # A 'set fan1_div' statement must go before a 'set fan1_min' statement, # because the driver uses the divisor in calculating the minimum. +# Also, one should set vrm prior to using vid in any formula. # # # BUS LINES @@ -1039,16 +1040,16 @@ chip "mtp008-*" # ignore temp3 chip "adm1025-*" -# + # The ADM1025 has integrated scaling resistors, rather # than external resistors common to most sensor devices. -# These apply to the first 6 voltage inputs in0-in5 -# (+2.5, VCore, +3.3, +5, 12, VCC). As the scaling is fixed inside +# These apply to the 6 voltage inputs in0-in5 (+2.5V, VCore, +# +3.3V, +5V, +12V, VCC). As the scaling is fixed inside # the chip for these inputs, it is fairly certain that the # motherboard connections match these labels, and that the # driver computations are correct. Therefore they do not need to # be overridden here. -# + label in0 "+2.5V" label in1 "VCore" label in2 "+3.3V" @@ -1056,13 +1057,21 @@ chip "adm1025-*" label in4 "+12V" label in5 "VCC" - label temp1 "SYS Temp" - label temp2 "CPU Temp" +# Depending on how your chipset is hardwired, you may or may not have +# +12V readings (will show as 0.0V if you don't have it). +# ignore in4 -# temp minimums should be renamed from _hyst to _min!!! +# VCC is the power-supply voltage of the ADM1025 chipset, generally +# redundant with +3.3V so you may want to hide it. +# ignore in5 + + label temp1 "CPU Temp" + label temp2 "M/B Temp" # adjust this if your vid is wrong; see doc/vid set vrm 9.0 + +# Tolerate a 5% deviance for CPU power-supply (default is 10%) set in1_min vid * 0.95 set in1_max vid * 1.05