From 9b5bba29c49e73ec719bb4bce69a77b094480005 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Tue, 26 Sep 2006 09:18:33 +0000
Subject: [PATCH] Add SMSC DME1737 detection.

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@4185 7894878c-1315-0410-8ee3-d5d059ff63e0
---
 CHANGES                    |  1 +
 prog/detect/sensors-detect | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/CHANGES b/CHANGES
index a1e45758..1234f4a1 100644
--- a/CHANGES
+++ b/CHANGES
@@ -2,6 +2,7 @@ lm_sensors CHANGES file
 -----------------------
 
 2.10.2 (2006????)
+  Program sensors-detect: Add SMSC DME1737 detection
 
 2.10.1 (20060924)
   File doc/developers/checklist renamed to dev/developers/release_checklist
diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
index 1713b5ad..86a8b72c 100755
--- a/prog/detect/sensors-detect
+++ b/prog/detect/sensors-detect
@@ -1330,6 +1330,12 @@ use vars qw(@pci_adapters_sis5595 @pci_adapters_sis645 @pci_adapters_sis96x);
        i2c_addrs => [0x2c..0x2d],
        i2c_detect => sub { smsc47m192_detect(@_); },
      },
+     {
+       name => "SMSC DME1737",
+       driver => "to-be-written",
+       i2c_addrs => [0x2c..0x2e],
+       i2c_detect => sub { dme1737_detect(@_); },
+     },
      {
        name => "Fintek F75111R/RG/N (GPIO)",
        driver => "to-be-written",
@@ -1723,6 +1729,12 @@ $chip_kern26_w83791d = {
         # No datasheet
         devid => 0x76,
       },
+      {
+	name => "SMSC DME1737 Super IO",
+	# Hardware monitoring features are accessed on the SMBus
+	driver => "not-a-sensor",
+	devid => 0x78,
+      },
     ],
   },
   {
@@ -4594,6 +4606,27 @@ sub smsc47m192_detect
   return ($addr == 0x2d ? 6 : 5);
 }
 
+# $_[0]: A reference to the file descriptor to access this chip.
+#        We assume an i2c_set_slave_addr was already done.
+# $_[1]: Address
+# Returns: undef if not detected, 5 or 6 if detected.
+# Registers used:
+#   0x3E: Manufacturer ID
+#   0x3F: Version/Stepping
+#   0x40: Configuration (2 reserved bits)
+#   0x42: Interrupt Status 2 (1 reserved bit)
+#   0x43: VID (2 reserved bits)
+sub dme1737_detect
+{
+  my ($file, $addr) = @_;
+  return unless i2c_smbus_read_byte_data($file, 0x3E) == 0x55
+           and (i2c_smbus_read_byte_data($file, 0x3F) & 0xF8) == 0x88
+           and (i2c_smbus_read_byte_data($file, 0x40) & 0xC4) == 0x04
+           and (i2c_smbus_read_byte_data($file, 0x42) & 0x02) == 0x00
+           and (i2c_smbus_read_byte_data($file, 0x43) & 0xC0) == 0x00;
+  return ($addr == 0x2e ? 6 : 5);
+}
+
 # $_[0]: Chip to detect
 #   (1 = F75111R/RG/N, 2 = F75121R/F75122R/RG, 3 = F75373S/SG,
 #    4 = F75375S/SP, 5 = F75387SG/RG, 6 = F75383M/S/F75384M/S,