From b66a69365a4d042303e83130bf7e72f1b8918590 Mon Sep 17 00:00:00 2001 From: Philip Edelbrock Date: Sun, 14 Feb 1999 06:08:42 +0000 Subject: [PATCH] (Phil) Moved doc/piix4 to doc/i2c-piix4. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@226 7894878c-1315-0410-8ee3-d5d059ff63e0 --- doc/busses/piix4 | 29 ----------------------------- 1 file changed, 29 deletions(-) delete mode 100644 doc/busses/piix4 diff --git a/doc/busses/piix4 b/doc/busses/piix4 deleted file mode 100644 index 37b60f8c..00000000 --- a/doc/busses/piix4 +++ /dev/null @@ -1,29 +0,0 @@ -The PIIX4 (properly known as the 82371AB) is an Intel chip with a lot of -functionality. Among other things, it implements the PCI bus. One of its -minor functions is implementing a System Management Bus. This is a true -SMBus - you can not access it on I2C levels. The good news is that it -natively understands SMBus commands and you do not have to worry about -timing problems. The bad news is that non-SMBus devices connected to it -can confuse it mightily. Yes, this is known to happen... - -Cat /proc/pci, and see whether it contains an entry like this: - - Bus 0, device 1, function 3: - Bridge: Intel 82371AB PIIX4 ACPI (rev 1). - Medium devsel. Fast back-to-back capable. - -Bus and device numbers may differ, but the function number must be identical -(like many PCI devices, the PIIX4 incorporates a number of different -'functions', which can be considered as separate devices). If you find such -an entry, you have a PIIX4 SMBus controller. - -On some computers (most notably, some Dells), the SMBus is disabled by -default. If you compile the i2c-piix4 module with '-DFORCE_PIIX4_ENABLE', -it will try to enable it. THIS IS VERY DANGEROUS! If the BIOS did not -set up a correct address for this module, you could get in big trouble -(read: crashes, data corruption, etc.). Try this only as a last resort -(try BIOS updates first, for example), and backup first! - -The PIIX4E is just an new version of the PIIX4; it is supported as well. The -PIIX/PIIX3 does not implement an SMBus or I2C bus, so you can't use this -driver on those mainboards.