add ipmi driver docs

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1614 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
Mark D. Studebaker committed 2002-11-16 19:11:36 +00:00
1 parent abd871b11f
commit c023ec3d2f
4 files changed
+260 -2

No files matched your search

+55
View File
@@ -0,0 +1,55 @@
Kernel driver `i2c-ipmb.o'
Status: Alpha
Supported adapters:
* IPMI BMC
Author: Mark D. Studebaker <mdsxyz123@yahoo.com>
Module Parameters
-----------------
(none)
Description
-----------
This is an adapter which provides access to the IPMB
(Intelligent Platform Management Bus) and other I2C / SMBus busses
behind the BMC (Baseboard Management Controller) via
IPMI (Intelligent Platform Management Interface).
This provides low-level access to all devices on busses
behind the BMC. For high-level access to sensors known
to the BMC, use the i2c-ipmi and bmcsensors modules.
This module REQUIRES the IPMI kernel patch by Corey Minyard,
v13 or higher, available at http://openipmi.sourceforge.net .
Other IPMI drivers are not supported.
See http://www.intel.com/design/servers/ipmi/ for
IPMI standards information.
You must configure the following features in your kernel
(under Character Devices):
IPMI top-level message handler
IPMI KCS handler
The IPMI device interface and IPMI watchdog handler are not required.
If the KCS handler (ipmi_kcs_drv) is configured as a module,
you must modprobe it separately, it will not load automatically
when you modprobe i2c-ipmi or ipmi_msghandler (unless you set up
/etc/modules.conf to load ipmi_kcs_drv when ipmi_msghandler is loaded).
Issues
------
Only one BMC is supported - shouldn't be a problem.
Alpha!
**********************
The lm_sensors project gratefully acknowledges the support of
Hewlett Packard (Ft. Collins) in the development of this driver.
+61
View File
@@ -0,0 +1,61 @@
Kernel driver `i2c-ipmi.o'
Status: Alpha
Supported adapters:
* IPMI BMC
Author: Mark D. Studebaker <mdsxyz123@yahoo.com>
Module Parameters
-----------------
(none)
Description
-----------
This is a "dummy" adapter which provides access to the
BMC (Baseboard Management Controller) via IPMI (Intelligent Platform
Management Interface). It is used by the bmcsensors module.
Together with the bmcsensors module, this provides high-level
access to sensors known by the BMC. For low-level access to
IPMB (I2C/SMBus) busses behind the BMC, use the i2c-ipmb module.
This module REQUIRES the IPMI kernel patch by Corey Minyard,
v13 or higher, available at http://openipmi.sourceforge.net .
Other IPMI drivers are not supported.
See http://www.intel.com/design/servers/ipmi/ for
IPMI standards information.
You must configure the following features in your kernel
(under Character Devices):
IPMI top-level message handler
IPMI KCS handler
The IPMI device interface and IPMI watchdog handler are not required.
If the KCS handler (ipmi_kcs_drv) is configured as a module,
you must modprobe it separately, it will not load automatically
when you modprobe i2c-ipmi or ipmi_msghandler (unless you set up
/etc/modules.conf to load ipmi_kcs_drv when ipmi_msghandler is loaded).
Issues
------
Only one BMC is supported - shouldn't be a problem.
Only one client is supported - to be fixed.
Libsensors was hacked to support this dummy driver; only
the ISA dummy driver was supported previously.
The library needs further enhancements for full
dummy driver support.
Alpha!
**********************
The lm_sensors project gratefully acknowledges the support of
Hewlett Packard (Ft. Collins) in the development of this driver.