From ccc797cce156c76231e3a501cbaca7a58af33801 Mon Sep 17 00:00:00 2001 From: "Mark D. Studebaker" Date: Sat, 6 Jan 2001 02:28:13 +0000 Subject: [PATCH] update docs to reflect change from temp and remote_temp to temp1 and temp2. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@968 7894878c-1315-0410-8ee3-d5d059ff63e0 --- doc/chips/adm1021 | 6 +++--- doc/chips/thmc50 | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/doc/chips/adm1021 b/doc/chips/adm1021 index 1becdb87..de652f65 100644 --- a/doc/chips/adm1021 +++ b/doc/chips/adm1021 @@ -218,7 +218,7 @@ Within each ADM1021 or MAX1617 directory, you can find the following files: 1-0 Reserved. Note: # - These flags stay high until the status register is read or they are reset by POR. -* temp (ADM1021_SYSCTL_TEMP) +* temp1 (ADM1021_SYSCTL_TEMP) A list of three numbers. The first number is the Overtemperature Shutdown value, the second number is Low limit value, and the third number is the current temperature. The first two values can be modified. Each value can @@ -237,8 +237,8 @@ Within each ADM1021 or MAX1617 directory, you can find the following files: computer gets too cold. If accessed through sysctl, this is a list of longs, each being the temperature times 10. -* remote_temp (ADM1021_SYSCTL_REMOTE_TEMP) - Works exactly the same way as 'temp', but uses an external temperature +* temp2 (ADM1021_SYSCTL_REMOTE_TEMP) + Works exactly the same way as 'temp1', but uses an external temperature probe for the sensing. The temperature probe is of a silicon diode type and not of a thermal-resistive type. A probe can easily be made from a common transister (see the ADM1021 for qualification specs) by shorting diff --git a/doc/chips/thmc50 b/doc/chips/thmc50 index 58c4f9cf..f3ec42d0 100644 --- a/doc/chips/thmc50 +++ b/doc/chips/thmc50 @@ -38,7 +38,7 @@ Module Parameters Description ----------- -The THMC50 implements: an internal temperature sensors, support for an +The THMC50 implements: an internal temperature sensor, support for an external diode-type temperature sensor (compatible w/ the diode sensor inside many processors), and a controllable fan/analog_out DAC. For the temperature sensors, limits can be set through the appropriate Overtemperature Shutdown @@ -61,8 +61,8 @@ Driver Features These are the files which are provided by the driver (ro=read-only, rw=read and writeable): -temp -- Three fields: [temp-os,rw] [temp-hyst,rw] [temp,ro] -remote_temp -- Three fields: [temp-os,rw] [temp-hyst,rw] [temp,ro] +temp1 (internal) -- Three fields: [temp-os,rw] [temp-hyst,rw] [temp,ro] +temp2 (remote) -- Three fields: [temp-os,rw] [temp-hyst,rw] [temp,ro] temp-os, temp-hyst, and temp are whole degree integers representing degrees celcius.