mirror of
https://github.com/lm-sensors/lm-sensors.git
synced 2026-11-19 19:40:49 +00:00
Fujitsu Poseidon support from Hermann Jung <hej@odn.de>
git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1179 7894878c-1315-0410-8ee3-d5d059ff63e0
This commit is contained in:
1 parent
27fb86918e
commit
d78cb7b93b
13 files changed
+1188
-1
No files matched your search
@@ -0,0 +1,122 @@
|
||||
Kernel driver `fscpos.o'
|
||||
======================
|
||||
|
||||
Status: Beta
|
||||
tested with motherboard d1107
|
||||
|
||||
think twice before you're using the write mode of some
|
||||
variables, especially the watchdog
|
||||
|
||||
|
||||
Supported chips:
|
||||
* fujitsu siemens poseidon chip
|
||||
Prefix `fscpos'
|
||||
Addresses scanned: I2C 0x73
|
||||
|
||||
Author: Hermann Jung <hej@odn.de>
|
||||
|
||||
|
||||
Module Parameters
|
||||
-----------------
|
||||
|
||||
* force: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to boldly assume to be present
|
||||
* ignore: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs not to scan
|
||||
* ignore_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples not to scan
|
||||
* probe: short array (min = 1, max = 48)
|
||||
List of adapter,address pairs to scan additionally
|
||||
* probe_range: short array (min = 1, max = 48)
|
||||
List of adapter,start-addr,end-addr triples to scan additionally
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the Fujitsu Siemens Poseidon chip.
|
||||
It is descibed in the 'Register Set Specification BMC Poseidon based Systemboard'
|
||||
from Fujitsu Siemens.
|
||||
|
||||
The poseidon chip implements a hardware based system management for e. g. controlling
|
||||
fan speed and core voltage.
|
||||
There is also a watchdog counter on the chip which can trigger an alarm and even
|
||||
shutdown the system.
|
||||
|
||||
The chip provides three temperature values (cpu, motherboard and auxiliary),
|
||||
three current values (12 volt, 5 volt and batterie) and
|
||||
three fans (power supply, cpu and auxiliary).
|
||||
|
||||
Temperatures are measured in degrees Celcius. The resolution is 1 degree.
|
||||
|
||||
FAN rotation speeds are reported in RPM (rotations per minute).
|
||||
The value can be divided by a programmable divider (1, 2, 4 or 8) which
|
||||
is stord on the chip.
|
||||
|
||||
Voltage sensors (also known as IN sensors) report their values in volts.
|
||||
|
||||
All values are reported as final values from the driver.
|
||||
There is not need for further calculations
|
||||
|
||||
Chip Features
|
||||
-------------
|
||||
|
||||
Chip `fscpos'
|
||||
LABEL LABEL CLASS COMPUTE CLASS ACCESS MAGNITUDE
|
||||
rev NONE NONE R 0
|
||||
event NONE NONE R 0
|
||||
control NONE NONE RW 0
|
||||
volt12 NONE NONE R 2
|
||||
volt5 NONE NONE R 2
|
||||
voltbatt NONE NONE R 2
|
||||
temp1 NONE NONE R 0
|
||||
temp2 NONE NONE R 0
|
||||
temp3 NONE NONE R 0
|
||||
temp1_state temp1 temp1 RW 0
|
||||
temp2_state temp2 temp2 RW 0
|
||||
temp3_state temp3 temp3 RW 0
|
||||
fan1 NONE NONE R 0
|
||||
fan2 NONE NONE R 0
|
||||
fan3 NONE NONE R 0
|
||||
fan1_min fan1 fan1 RW 0
|
||||
fan2_min fan2 fan2 RW 0
|
||||
fan1_state fan1 fan1 RW 0
|
||||
fan2_state fan2 fan2 RW 0
|
||||
fan3_state fan3 fan3 RW 0
|
||||
fan1_ripple fan1 fan1 RW 0
|
||||
fan2_ripple fan2 fan2 RW 0
|
||||
fan3_ripple fan3 fan3 RW 0
|
||||
wdog_preset NONE NONE RW 0
|
||||
wdog_state wdog_preset wdog_preset RW 0
|
||||
wdog_control wdog_preset wdog_preset RW 0
|
||||
|
||||
|
||||
|
||||
LABEL FEATURE SYMBOL SYSCTL FILE:OFFSET
|
||||
rev FSCPOS_SYSCTL_REV rev:1
|
||||
event FSCPOS_SYSCTL_EVENT event:1
|
||||
control FSCPOS_SYSCTL_CONTROL control:1
|
||||
volt12 FSCPOS_SYSCTL_VOLTAGE1 volt0:1
|
||||
volt5 FSCPOS_SYSCTL_VOLTAGE2 volt1:1
|
||||
voltbatt FSCPOS_SYSCTL_VOLTAGE3 volt2:1
|
||||
temp1 FSCPOS_SYSCTL_TEMP1 temp0:2
|
||||
temp2 FSCPOS_SYSCTL_TEMP2 temp1:2
|
||||
temp3 FSCPOS_SYSCTL_TEMP3 temp2:2
|
||||
temp1_state FSCPOS_SYSCTL_TEMP1_STATE temp0:1
|
||||
temp2_state FSCPOS_SYSCTL_TEMP2_STATE temp1:1
|
||||
temp3_state FSCPOS_SYSCTL_TEMP3_STATE temp2:1
|
||||
fan1 FSCPOS_SYSCTL_FAN1 fan0:4
|
||||
fan2 FSCPOS_SYSCTL_FAN2 fan1:4
|
||||
fan3 FSCPOS_SYSCTL_FAN3 fan2:4
|
||||
fan1_min FSCPOS_SYSCTL_FAN1_MIN fan0:2
|
||||
fan2_min FSCPOS_SYSCTL_FAN2_MIN fan1:2
|
||||
fan1_state FSCPOS_SYSCTL_FAN1_STATE fan0:1
|
||||
fan2_state FSCPOS_SYSCTL_FAN2_STATE fan1:1
|
||||
fan3_state FSCPOS_SYSCTL_FAN3_STATE fan2:1
|
||||
fan1_ripple FSCPOS_SYSCTL_FAN1_RIPPLE fan0:3
|
||||
fan2_ripple FSCPOS_SYSCTL_FAN2_RIPPLE fan1:3
|
||||
fan3_ripple FSCPOS_SYSCTL_FAN3_RIPPLE fan2:3
|
||||
wdog_preset FSCPOS_SYSCTL_WDOG_PRESET wdog:1
|
||||
wdog_state FSCPOS_SYSCTL_WDOG_STATE wdog:2
|
||||
wdog_control FSCPOS_SYSCTL_WDOG_CONTROL wdog:3
|
||||
|
||||
Reference in new issue
Block a user