diff --git a/CHANGES b/CHANGES
index 14f84a64..4572f50b 100644
--- a/CHANGES
+++ b/CHANGES
@@ -21,6 +21,7 @@ ask CVS about it:
   File README.thinkpad: Update
   File doc/chips/lm63: New
   File kernel/chips/Module.mk: Resync module list with mkpatch
+  Module i2c-ipmb: Remove from build since it doesn't work
   Module lm63: New driver for the National Semiconductor LM63
   Module lm83: Use signed types for temperatures
                Check limits on register writes
@@ -31,6 +32,7 @@ ask CVS about it:
                Check limits on register writes
   Module lm93: Added module parameter for VID pin input thresholds.
   Module pc87360: Support secondary Super-I/O address
+  Module smsc47m1: Add support for 47M15x and 47M192 (fans only)
   Library: Add lm63 support
   Program i2cset: Written byte/word can be masked
   Program sensors: Add lm63 support
diff --git a/doc/chips/smsc47m1 b/doc/chips/smsc47m1
index 344d0fc8..0061b17e 100644
--- a/doc/chips/smsc47m1
+++ b/doc/chips/smsc47m1
@@ -32,6 +32,10 @@ Description
 The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
 contain monitoring and PWM control circuitry for two fans.
 
+The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
+in addition to the fan monitoring and control. The hardware monitoring
+block is not yet supported by the driver.
+
 FAN rotation speeds are reported in RPM (rotations per minute). An alarm is
 triggered if the rotation speed has dropped below a programmable limit. FAN 
 readings can be divided by a programmable divider (1, 2, 4 or 8) to give
diff --git a/kernel/chips/smsc47m1.c b/kernel/chips/smsc47m1.c
index 6d83da3e..1da44c2b 100644
--- a/kernel/chips/smsc47m1.c
+++ b/kernel/chips/smsc47m1.c
@@ -86,7 +86,7 @@ superio_exit(void)
  * The 47M15x and 47M192 chips "with hardware monitoring block"
  * can do much more besides (device id 0x60).
  */
-#define SMSC_DEVID_MATCH(id) ((id) == 0x51 || (id) == 0x59 || (id) == 0x5F)
+#define SMSC_DEVID_MATCH(id) ((id) == 0x51 || (id) == 0x59 || (id) == 0x5F || (id) == 0x60)
 
 #define SMSC_ACT_REG 0x30
 #define SMSC_BASE_REG 0x60