From df9478ed118302a9ee6a0cfca3bd4687b62127f8 Mon Sep 17 00:00:00 2001
From: "Mark D. Studebaker" <mdsxyz123@yahoo.com>
Date: Sun, 30 Jun 2002 23:33:09 +0000
Subject: [PATCH] renamed to sensord.init

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@1413 7894878c-1315-0410-8ee3-d5d059ff63e0
---
 prog/init/sensors | 157 ----------------------------------------------
 1 file changed, 157 deletions(-)
 delete mode 100755 prog/init/sensors

diff --git a/prog/init/sensors b/prog/init/sensors
deleted file mode 100755
index 943e5dbe..00000000
--- a/prog/init/sensors
+++ /dev/null
@@ -1,157 +0,0 @@
-#!@BASH@
-#
-# @INITRDDIR@/sensors
-#
-# sensors       This shell script takes care of starting and stopping
-#               sensord, the lm_sensors hardware health monitoring daemon.
-#
-# Here is the sensors service for SysV init, based on lm_sensors-2.5.5-sensors
-# from Mandrake lm_sensors source RPM. It is modified according to recommendations
-# for RedHat initscripts. The drivers starting part is taken from alsasound
-# service. To configure this service one should put appropriate "alias i2c-bus-0
-# xxx" and "alias i2c-sensors-chip-0 xxx" in /etc/modules.conf. The rest should be
-# self explaining.
-#
-# You put it into /etc/rc.d/init.d/, you make symlink (probably using
-# chkconfig, ntsysv, tksysv or serviceconf program) named S95xxx and K05xxx
-# into /etc/rc#.d (where # is the number of runlevel), and sensors service
-# (which starts lm_sensors modules, runs sensors -s and starts sensord)
-# will be started automatically at startup/reboot and stopped at shutdown.
-# One could also start/stop service manually.
-#
-# This service was tested for RedHat 7.2 only.
-# Jakub Narębski, Poland
-#
-
-# chkconfig: 2345 05 95
-# processname: sensord
-# config: @SYSCONFDIR@/sensors.conf
-# pidfile: /var/run/sensord.pid
-# description: Sensors is a sensors daemon which can be used to alert you \
-#              in the event of a hardware health monitoring alarm.
-
-# Source function library.
-. @INITRDDIR@/functions
-
-# Set default return value to 0 (success)
-RETVAL=0
-# Add @SBINDIR@ (sensord) and @BINDIR@ (sensors) to PATH if necessary
-echo "$PATH" | grep -q @SBINDIR@ || PATH=$PATH:@SBINDIR@
-echo "$PATH" | grep -q  @BINDIR@ || PATH=$PATH:@BINDIR@
-export PATH
-
-# Modules to load from modules.conf (modules configuration)
-i2c_bus_drivers=´modprobe -c | \
-  awk ´/^[[:space:]]*alias[[:space:]]+i2c-bus-[[:digit:]]/ { print $3 }´´
-i2c_chip_drivers=´modprobe -c | \
-  awk ´/^[[:space:]]*alias[[:space:]]+i2c-sensors-chip-[[:digit:]]/ { print $3
-}´´
-
-# Configuration of sensord
-interval=1m      # interval between scanning for sensor alarms
-log_interval=30m # interval between logging all sensor readings
-
-# Check that we use kernel for which lm_sensors-drivers was installed
-[ ´uname -r´ = @MVERSION@ ] || exit 0
-
-# Check that lm_sensors is installed.
-[ -x @SBINDIR@/sensord ] || exit 0
-[ -x  @BINDIR@/sensors ] || exit 0
-
-echo_status()
-{
-        if [ $1 -eq 0 ]; then
-                echo_success
-        else
-                echo_failure
-        fi
-        echo
-}
-
-start()
-{
-        # Start modules
-        echo "Starting I2C bus (adapter) drivers: "
-        for driver in $i2c_bus_drivers; do
-                echo -n "Starting I2C driver: $driver "
-                /sbin/modprobe ´echo $driver´
-                echo_status $?
-        done
-        echo "Starting I2C chip (sensors) drivers: "
-        for driver in $i2c_chip_drivers; do
-                echo -n "Starting I2C driver: $driver "
-                /sbin/modprobe $(echo $driver)
-                echo_status $?
-        done
-        # Set Alarm
-        echo -n "Configuring sensors: "
-        sensors -s && sleep 2
-        echo_status $?
-        # Start daemons.
-        echo -n $"Starting sensord: "
-        daemon sensord -i $interval -l $log_interval
-        RETVAL=$?
-
-        [ $RETVAL -eq 0 ] && touch /var/lock/subsys/sensors
-
-        echo
-        return $RETVAL
-}
-
-stop()
-{
-        # Stop daemons.
-        echo -n $"Shutting down sensord: "
-        killproc sensord
-        RETVAL=$?
-
-        echo
-        # Remove modules
-        drivers=´echo "$i2c_chip_drivers $i2c_bus_drivers" | \
-          tr -s "[:space:]\n" " "´
-        echo -n "Removing I2C drivers: $drivers"
-        /sbin/modprobe -r -q $drivers
-        echo_status $?
-
-        echo
-        [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/sensors
-
-        return $RETVAL
-}
-
-reload()
-{
-        # Reread configuration file
-        sensors -s
-
-        return $?
-}
-
-# See how we were called.
-case "$1" in
-  start)
-        start
-        ;;
-  stop)
-        stop
-        ;;
-  status)
-        status sensord
-        ;;
-  restart)
-        stop
-        start
-        ;;
-  reload)
-        reload
-        ;;
-  condrestart)
-        [ -e /var/lock/subsys/sensors ] && restart || :
-        ;;
-  *)
-        echo "Usage: sensors {start|stop|restart|reload|condrestart|status}"
-        exit 1
-        ;;
-esac
-
-exit $?