diff --git a/prog/eeprom/decode-dimms.pl b/prog/eeprom/decode-dimms.pl
index d02f0b9e..1725fa76 100755
--- a/prog/eeprom/decode-dimms.pl
+++ b/prog/eeprom/decode-dimms.pl
@@ -100,7 +100,7 @@ printh '
 PC DIMM Serial Presence Detect Tester/Decoder
 Written by Philip Edelbrock.  Copyright 1998, 1999.
 Modified by Christian Zuckschwerdt <zany@triq.net>
-Version 0.6
+Version 2.6.3
 ';
 
 print "<table border=1>\n" if $opt_html;
@@ -123,7 +123,7 @@ for $i ( 0 .. $#dimm_list ) {
 # Decode first 16 bytes
 		prints "The Following is Required Data and is Applicable to all DIMM Types";
 
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data0-15`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/00`;
 		@bytes=split(" ");
 		for $j ( 0 .. 15 ) { $dimm_checksum = $dimm_checksum + $bytes[$j];  }
 		
@@ -226,7 +226,7 @@ for $i ( 0 .. $#dimm_list ) {
 		prints "The Following Apply to SDRAM DIMMs ONLY";
 		
 # Decode next 16 bytes
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data16-31`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/10`;
 		@bytes=split(" ");
 		for $j ( 0 .. 15 ) { $dimm_checksum = $dimm_checksum + $bytes[$j]; }
 		
@@ -377,7 +377,7 @@ for $i ( 0 .. $#dimm_list ) {
 		
 		
 # Decode next 16 bytes (32-47)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data32-47`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/20`;
 		@bytes=split(" ");
 		for $j ( 0 .. 15 ) { $dimm_checksum = $dimm_checksum + $bytes[$j];  }
 		
@@ -401,7 +401,7 @@ for $i ( 0 .. $#dimm_list ) {
 
 # That's it for the lower part of an SDRAM EEPROM's memory!
 # Decode next 16 bytes (48-63)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data48-63`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/30`;
 		@bytes=split(" ");
 		for $j ( 0 .. 14 ) { $dimm_checksum = $dimm_checksum + $bytes[$j];  }
 
@@ -411,7 +411,7 @@ for $i ( 0 .. $#dimm_list ) {
 		printl $l, $temp;
 
 # Decode next 16 bytes (64-79)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data64-79`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/40`;
 		@bytes=split(" ");
 		
 		$l = "Manufacturer's JEDEC ID Code";
@@ -427,7 +427,7 @@ for $i ( 0 .. $#dimm_list ) {
 		
 		$l = "Manufacurer's Part Number:\"";
 # Decode next 16 bytes (80-95)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data80-95`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/50`;
 		@bytes2=split(" ");
 		$temp = pack("cccccccccccccccccc",$bytes[9],$bytes[10],$bytes[11],$bytes[12],$bytes[13],$bytes[14],$bytes[15],
 			$bytes2[0],$bytes2[1],$bytes2[2],$bytes2[3],$bytes2[4],$bytes2[5],$bytes2[6],$bytes2[7],$bytes2[8],$bytes2[9]);
@@ -443,12 +443,12 @@ for $i ( 0 .. $#dimm_list ) {
 		
 		$l = "Assembly Serial Number";
 # Decode next 16 bytes (96-111)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data96-111`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/60`;
 		@bytes=split(" ");
 		
 		$temp = sprintf("0x%.2X%.2X%.2X%.2X\n",$bytes2[15],$bytes[0],$bytes[1],$bytes[2]);
 # Decode next 16 bytes (112-127)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data112-127`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/70`;
 		@bytes=split(" ");
 		
 		$l = "Intel Specification for Frequency";
diff --git a/prog/xeon/decode-xeon.pl b/prog/xeon/decode-xeon.pl
index 1b5d859b..209730a0 100755
--- a/prog/xeon/decode-xeon.pl
+++ b/prog/xeon/decode-xeon.pl
@@ -33,7 +33,7 @@
 
 print "Xeon Processor Information ROM Decoder\n";
 print "Written by Philip Edelbrock and Mark Studebaker.  Copyright 1998, 1999.\n";
-print "Version 0.1\n\n";
+print "Version 2.6.3\n\n";
 
 $dimm_count=0;
 $_=`ls /proc/sys/dev/sensors/`;
@@ -52,7 +52,7 @@ for $i ( 0 .. $#dimm_list ) {
 # Decode first 16 bytes
 		print "\t\t----=== Xeon ROM Header Data ===----\n";
 
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data0-15`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/00`;
 		@bytes=split(" ");
 		
 		printf("\tData Format Revision: \t\t\t\t0x%.4X\n", $bytes[0]);
@@ -73,7 +73,7 @@ for $i ( 0 .. $#dimm_list ) {
 		print "\t\t----=== Xeon ROM Processor Data ===----\n";
 		
 # Decode next 16 bytes
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data16-31`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/10`;
 		@bbytes=split(" ");
 	      	print "\tS-spec/QDF Number:\t\t\t\t\"";
 		print pack("cccccc",$bytes[14],$bytes[15],$bbytes[0],
@@ -102,7 +102,7 @@ for $i ( 0 .. $#dimm_list ) {
 		print "\n";
 		
 # Decode next 16 bytes (32-47)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data32-47`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/20`;
 		@bytes=split(" ");
 		print "\tCore Voltage ID (mV):\t\t\t\t";
 		print ($bbytes[15] << 4) + $bytes[0];
@@ -132,7 +132,7 @@ for $i ( 0 .. $#dimm_list ) {
 		print "\n";
 
 # Decode next 16 bytes (48-63)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data48-63`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/30`;
 		@bytes=split(" ");
 
 		printf("\tCache/Tag Stepping ID:\t\t\t\t0x%.2X\n",
@@ -155,7 +155,7 @@ for $i ( 0 .. $#dimm_list ) {
 		$byte15=$byte[15];
 
 # Decode next 16 bytes (64-79)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data64-79`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/40`;
 		@bytes=split(" ");
 
 	      	print "\tProcessor BOM ID:\t\t\t\t\"";
@@ -166,7 +166,7 @@ for $i ( 0 .. $#dimm_list ) {
 		print "\"\n";
 
 # Decode next 16 bytes (80-95)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data80-95`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/50`;
 		@bbytes=split(" ");
 		printf("\tProcessor Electronic Signature: \t\t0x%.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2X\n",
 			$bytes[13],$bytes[14],$bytes[15],$bbytes[0],
@@ -176,7 +176,7 @@ for $i ( 0 .. $#dimm_list ) {
 # Not used...   
 
 # Decode next 16 bytes (112-127)
-		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/data112-127`;
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/70`;
 		@bytes=split(" ");
 		
 		print "\t\t----=== Xeon Thermal Reference Data ===----\n";