diff --git a/CHANGES b/CHANGES
index e2b94337..67765c3b 100644
--- a/CHANGES
+++ b/CHANGES
@@ -3,6 +3,7 @@ lm_sensors CHANGES file
 
 SVN HEAD
   File sensors.conf.eg: Add a dme1737 section
+  File lm_sensors.sysconfig: Delete, now generated by sensors-detect
   Library: Clean up pwm symbol names translation
            Add dme1737 support
   Man page sensors.conf.5: Update the chip statement section
diff --git a/prog/init/README b/prog/init/README
index ab8dcdb2..f3392f00 100644
--- a/prog/init/README
+++ b/prog/init/README
@@ -12,14 +12,13 @@ mechanism (i.e. SVR4-based), as opposed to the everything-in-one-script
 (/etc/rc or /etc/rc.local) like the BSD-based systems do.
 The lm_sensors.init file should be copied to /etc/rc.d/init.d/lm_sensors.
 For more information see the top of the file.
-It requires the /etc/sysconfig/sensors file, which identifies
+It requires the /etc/sysconfig/lm_sensors file, which identifies
 the correct modules.
 
-The /etc/sysconfig/lm_sensors file is only a list of modules,
-as would be determined by running sensors-detect.
-The lm_sensors.sysconfig file contains the MODULE_# variable definitions;
-it should be modified for your setup and then
-copied to /etc/sysconfig/lm_sensors.
+The /etc/sysconfig/lm_sensors file is generated by running sensors-detect.
+Once the script is done detecting the hardware monitoring devices, it will
+list all the required modules in that file, so that they can be loaded
+automatically at boot time.
 
 SuSE users will want to use lm_sensors.init.suse instead, which is
 more specifically designed for this distribution. Changes were contributed
diff --git a/prog/init/lm_sensors.init b/prog/init/lm_sensors.init
index 65dfb13c..e9454359 100755
--- a/prog/init/lm_sensors.init
+++ b/prog/init/lm_sensors.init
@@ -2,7 +2,7 @@
 #
 # chkconfig: 2345 26 74
 # description: sensors is used for monitoring motherboard sensor values.
-# config: /etc/sysconfig/sensors
+# config: /etc/sysconfig/lm_sensors
 #
 #    This program is free software; you can redistribute it and/or modify
 #    it under the terms of the GNU General Public License as published by
@@ -21,8 +21,8 @@
 # See also the lm_sensors homepage at:
 #     http://www.lm-sensors.org
 
-# It uses a config file /etc/sysconfig/sensors that contains the modules to
-# be loaded/unloaded. That file is sourced into this one.
+# It uses a config file /etc/sysconfig/lm_sensors that contains the modules
+# to be loaded/unloaded. That file is sourced into this one.
 
 # The format of that file a shell script that simply defines the modules 
 # in order as normal shell variables with the special names:
diff --git a/prog/init/lm_sensors.init.suse b/prog/init/lm_sensors.init.suse
index e807160c..60058c6e 100755
--- a/prog/init/lm_sensors.init.suse
+++ b/prog/init/lm_sensors.init.suse
@@ -13,7 +13,7 @@
 ### END INIT INFO
 # chkconfig: 2345 26 74
 # description: sensors is used for monitoring motherboard sensor values.
-# config: /etc/sysconfig/sensors
+# config: /etc/sysconfig/lm_sensors
 #
 #    This program is free software; you can redistribute it and/or modify
 #    it under the terms of the GNU General Public License as published by
@@ -32,8 +32,8 @@
 # See also the lm_sensors homepage at:
 #     http://www.lm-sensors.org
 
-# It uses a config file /etc/sysconfig/sensors that contains the modules to
-# be loaded/unloaded. That file is sourced into this one.
+# It uses a config file /etc/sysconfig/lm_sensors that contains the modules
+# to be loaded/unloaded. That file is sourced into this one.
 
 # The format of that file a shell script that simply defines the modules 
 # in order as normal shell variables with the special names:
diff --git a/prog/init/lm_sensors.sysconfig b/prog/init/lm_sensors.sysconfig
index 0174874a..e69de29b 100755
--- a/prog/init/lm_sensors.sysconfig
+++ b/prog/init/lm_sensors.sysconfig
@@ -1,38 +0,0 @@
-# This is /etc/sysconfig/lm_sensors.
-#
-# sensors is used for monitoring motherboard sensor values.
-#
-# See also the lm_sensors homepage at:
-#     http://www.lm-sensors.org
-#
-# This file is used by /etc/rc.d/init.d/lm_sensors and defines the modules to be 
-# loaded/unloaded. This file is sourced into /etc/rc.d/init.d/lm_sensors.
-
-# The format of this file is a shell script that simply defines the modules 
-# in order as normal variables with the special names: 
-#    MODULE_1, MODULE_2, MODULE_3, etc.
-
-#
-# List the modules that are to be loaded for your system
-# Adapted from results of running /usr/sbin/sensors-detect
-#
-# Mine said (I have an ASUS K7M motherboard):
-#
-# #----cut here----
-# # I2C adapter drivers
-# modprobe i2c-matroxfb
-# # modprobe unknown adapter MAVEN:fb0 on i2c-matroxfb using Bit-shift algorithm
-# # modprobe unknown adapter MAVEN:fb0 on i2c-matroxfb using Bit-shift algorithm
-# modprobe i2c-isa
-# # I2C chip drivers
-# modprobe ddcmon
-# modprobe w83781d
-# modprobe via686a
-# #----cut here----
-#
-# Here is my module list
-MODULE_0=i2c-matroxfb
-MODULE_1=i2c-isa
-MODULE_2=ddcmon
-MODULE_3=w83781d
-MODULE_4=via686a