From ed0cff6b2cd3c8b3c355761f450dfef5d6bd9c56 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 27 Sep 2003 08:20:18 +0000 Subject: [PATCH] More A7V8X-X stuff. git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@2003 7894878c-1315-0410-8ee3-d5d059ff63e0 --- etc/sensors.conf.eg | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/etc/sensors.conf.eg b/etc/sensors.conf.eg index 20a344de..195fb543 100644 --- a/etc/sensors.conf.eg +++ b/etc/sensors.conf.eg @@ -1320,14 +1320,11 @@ chip "it87-*" "it8705-*" "it8712-*" # you probably need to change the sensor type. This must be done # with 'modprobe it87 temp_type=0xXX', you can't fix it in this file. # See ../doc/chips/it87 for details and valid 'XX' values!!! -# Also, note that on some motherboards (Asus A7V8X-X for example), temp1 is -# the CPU temp and temp2 is the MB temp. On that same motherboard, temp3 -# should be ignored since it is not used. # - label temp1 "Temp1/MB" + label temp1 "M/B Temp" set temp1_over 40 set temp1_hyst 20 - label temp2 "Temp2/CPU" + label temp2 "CPU Temp" set temp2_over 45 set temp2_hyst 25 # ignore temp3 @@ -1335,6 +1332,12 @@ chip "it87-*" "it8705-*" "it8712-*" set temp3_over 45 set temp3_hyst 25 +# The A7V8X-X has temperatures inverted, and needs a conversion for +# CPU temp. Thanks to Preben Randhol for the formula. +# label temp1 "CPU Temp" +# label temp2 "M/B Temp" +# compute temp1 (-15.096+1.4893*@), (@+15.096)/1.4893 + # Fans set fan1_min 0 set fan2_min 3000