From ed8cbf315c91a98132d47e7f6441077c7da5fc31 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Tue, 4 Apr 2006 17:13:32 +0000
Subject: [PATCH] Add detection of more Fintek chips: * F75373S/SG * F75383S/M
 * F75384S/M * custom power control chip at SMBus 0x2f

git-svn-id: http://lm-sensors.org/svn/lm-sensors/trunk@3282 7894878c-1315-0410-8ee3-d5d059ff63e0
---
 prog/detect/sensors-detect | 38 +++++++++++++++++++++++++++++++++++---
 1 file changed, 35 insertions(+), 3 deletions(-)

diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect
index a33b85df..f661b2ef 100755
--- a/prog/detect/sensors-detect
+++ b/prog/detect/sensors-detect
@@ -1511,6 +1511,12 @@ use subs qw(mtp008_detect lm78_detect lm78_isa_detect lm78_alias_detect
        i2c_addrs => [0x4e], # 0x37 not probed
        i2c_detect => sub { fintek_detect 2, @_ },
      },
+     {
+       name => "Fintek F75373S/SG",
+       driver => "to-be-written",
+       i2c_addrs => [0x2d..0x2e],
+       i2c_detect => sub { fintek_detect 3, @_ },
+     },
      {
        name => "Fintek F75375S/SP",
        driver => "to-be-written",
@@ -1523,6 +1529,24 @@ use subs qw(mtp008_detect lm78_detect lm78_isa_detect lm78_alias_detect
        i2c_addrs => [0x2d..0x2e],
        i2c_detect => sub { fintek_detect 5, @_ },
      },
+     {
+       name => "Fintek F75383S/M",
+       driver => "to-be-written",
+       i2c_addrs => [0x4c],
+       i2c_detect => sub { fintek_detect 6, @_ },
+     },
+     {
+       name => "Fintek F75384S/M",
+       driver => "to-be-written",
+       i2c_addrs => [0x4d],
+       i2c_detect => sub { fintek_detect 6, @_ },
+     },
+     {
+       name => "Fintek custom power control IC",
+       driver => "to-be-written",
+       i2c_addrs => [0x2f],
+       i2c_detect => sub { fintek_detect 7, @_ },
+     },
      {
        name => "Philips Semiconductors SAA1064",
        driver => "saa1064",
@@ -4524,8 +4548,9 @@ sub smsc47m192_detect
 }
 
 # $_[0]: Chip to detect
-#   (1 = F75111R/RG/N, 2 = F75121R/F75122R/RG, 4 = F75375S/SG,
-#    5 = F75387SG/RG)
+#   (1 = F75111R/RG/N, 2 = F75121R/F75122R/RG, 3 = F75373S/SG,
+#    4 = F75375S/SP, 5 = F75387SG/RG, 6 = F75383M/S/F75384M/S,
+#    7 = custom power control IC)
 # $_[1]: A reference to the file descriptor to access this chip.
 #        We assume an i2c_set_slave_addr was already done.
 # $_[2]: Address (unused)
@@ -4547,10 +4572,17 @@ sub fintek_detect
     return unless $chipid == 0x0300;
   } elsif ($chip == 2) { # F75121R/F75122R/RG
     return unless $chipid == 0x0301;
-  } elsif ($chip == 4) { # F75375S/SG
+  } elsif ($chip == 3) { # F75373S/SG
+    return unless $chipid == 0x0204;
+  } elsif ($chip == 4) { # F75375S/SP
     return unless $chipid == 0x0306;
   } elsif ($chip == 5) { # F75387SG/RG
     return unless $chipid == 0x0410;
+  } elsif ($chip == 6) { # F75383M/S/F75384M/S
+    # The datasheet has 0x0303, but Fintek say 0x0413 is also possible
+    return unless $chipid == 0x0303 || $chipid == 0x0413;
+  } elsif ($chip == 7) { # custom power control IC
+    return unless $chipid == 0x0302;
   }
 
   return 7;